Edgar Filing: MASIMO CORP

Consumer Monitoring Solutions:

Devices
(e.g. iSpO2^®, MightySat^®with PVi^® and RRp^®(shown below))

• Fingertip pulse oximeter, or pulse oximeter cable and sensor for use with an iPhone, iPad, iPod touch and select Android smart phones

• Sold directly to consumers and through consumer retailers

Document

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

________________________________________________

FORM 10-K

________________________________________________________________________

(Mark One)



þ	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 29, 2018



¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 001-33642

__________________________________________________________

Masimo Corporation

(Exact name of registrant as specified in its charter)

_________________________________________________________



Delaware		33-0368882
(State or Other Jurisdiction of Incorporation or Organization)		(I.R.S. Employer Identification Number)
52 Discovery, Irvine, California		92618
(Address of Principal Executive Offices)		(Zip Code)

(949) 297-7000

(Registrant’s telephone number, including area code)

_________________________________________________________

Securities registered pursuant to Section 12(b) of the Act:



Title of each class:		Name of each exchange on which registered:
Common Stock, par value $0.001		The Nasdaq Global Select Market

Securities registered pursuant to Section 12(g) of the Act: None

_________________________________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer

Accelerated filer

Non accelerated filer

Smaller reporting company

Emerging growth company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No þ

The aggregate market value of the voting stock held by non-affiliates of the registrant, based upon the closing sale price of the common stock on June 30, 2018, the last business day of the registrant’s most recently completed second fiscal quarter, as reported on the Nasdaq Global Select Market, was approximately $4.3 billion. Shares of stock held by officers, directors and 5 percent or more stockholders have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. At January 25, 2019, the registrant had 53,172,028 shares of common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K incorporate information by reference from the registrant’s proxy statement for the registrant’s 2019 Annual Meeting of Stockholders to be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year covered by this annual report on Form 10-K.

Table of Contents

MASIMO CORPORATION

FISCAL YEAR 2018 FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS



		Page
PART I

Item 1	Business	1

Item 1A	Risk Factors	33

Item 1B	Unresolved Staff Comments	53

Item 2	Properties	54

Item 3	Legal Proceedings	54

Item 4	Mine Safety Disclosures	54

PART II

Item 5	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	55

Item 6	Selected Financial Data	57

Item 7	Management’s Discussion and Analysis of Financial Condition and Results of Operations	59

Item 7A	Quantitative and Qualitative Disclosures about Market Risk	74

Item 8	Financial Statements and Supplementary Data	75

Item 9	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	75

Item 9A	Controls and Procedures	75

Item 9B	Other Information	75

PART III

Item 10	Directors, Executive Officers and Corporate Governance	76

Item 11	Executive Compensation	76

Item 12	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	76

Item 13	Certain Relationships and Related Transactions and Director Independence	76

Item 14	Principal Accounting Fees and Services	76

PART IV

Item 15	Exhibits and Financial Statement Schedules	77

Item 16	Form 10-K Summary	81

Signatures		82

Table of Contents

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains “forward-looking statements” that involve risks and uncertainties, as well as assumptions that, if they never materialize or prove incorrect, could cause our results to differ materially and adversely from those expressed or implied by such forward-looking statements. The forward-looking statements are contained principally in Item 1—“Business,” Item 1A—“Risk Factors” and Item 7—“Management’s Discussion and Analysis of Financial Condition and Results of Operations” but appear throughout this Annual Report on Form 10-K. Examples of forward-looking statements include, but are not limited to, any projection or expectation of earnings, revenue or other financial items; the plans, strategies and objectives of management for future operations; factors that may affect our operating results, including accounting and tax estimates; our success in pending litigation; new products or services; the demand for our products; our ability to consummate acquisitions and successfully integrate them into our operations; future capital expenditures; effects of current or future economic conditions or performance; industry trends and other matters that do not relate strictly to historical facts or statements of assumptions underlying any of the foregoing. These statements are often identified by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “ongoing,” “opportunity,” “plan,” “potential,” “predicts,” “seek,” “should,” “will,” or “would,” and similar expressions and variations or negatives of these words. These forward-looking statements are based on the expectations, estimates, projections, beliefs and assumptions of our management based on information currently available to management, all of which is subject to change. Such forward-looking statements are subject to risks, uncertainties and other factors that are difficult to predict and could cause our actual results and the timing of certain events to differ materially and adversely from future results expressed or implied by such forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those identified below, and those discussed under Item 1A—“Risk Factors” in this Annual Report on Form 10-K. Furthermore, such forward-looking statements speak only as of the date of this Annual Report on Form 10-K. We undertake no obligation to update or revise publicly any forward-looking statements to reflect events or circumstances after the date of such statements for any reason, except as otherwise required by law.

PART I


ITEM 1.	BUSINESS

Overview

We are a global medical technology company that develops, manufactures and markets a variety of noninvasive monitoring technologies. We provide our products directly and through distributors and original equipment manufacturers (OEM) partners to hospitals, emergency medical service (EMS) providers, long-term care facilities, physician offices, veterinarians and consumers. Our mission is to improve patient outcomes and reduce the cost of care. We were incorporated in California in May 1989 and reincorporated in Delaware in May 1996.

Our core business is Measure-through Motion and Low Perfusion^® pulse oximetry monitoring, known as Masimo Signal Extraction Technology^® (SET^®) pulse oximetry. Our product offerings have expanded significantly over the years to also include noninvasive monitoring of blood constituents with an optical signature, optical organ oximetry monitoring, electrical brain function monitoring, acoustic respiration monitoring and exhaled gas monitoring. In addition, we have developed the Root^™ patient monitoring and connectivity platform, the Radical-7^®and Rad-97^™ bedside and portable patient monitors and the Radius-7^®wearable wireless patient monitor. We have also developed the Masimo Patient SafetyNet¹ supplemental remote patient surveillance and monitoring system, which currently allows up to 200 patients to be monitored and viewed simultaneously and remotely through a PC-based monitor or by care providers through their pagers, voice-over-IP phones or smartphones. As part of our hospital automation product suite, we recently launched UniView^™, an integrated display of real-time data and alarms from multiple Masimo and third-party devices, designed to reduce clinician cognitive overload, improve patient safety and promote data sharing and team coordination among multiple clinicians.

Our solutions and related products are based upon our proprietary Masimo SET^® and rainbow^® algorithms. These technologies are incorporated into a variety of product platforms designed to meet our customers’ needs. In addition, we provide our technologies to OEMs in a form factor that is easy to integrate into their patient monitors, defibrillators, infant incubators and other devices.

Our technology is supported by a substantial intellectual property portfolio that we have built through internal development and, to a lesser extent, acquisitions and license agreements. We have also exclusively licensed from Cercacor Laboratories, Inc. (Cercacor) the right to certain OEM rainbow^® technologies and to incorporate certain rainbow^® technology into our products intended to be used by professional caregivers, including, but not limited to, hospital caregivers and alternate care facility caregivers.

^{___________________________}

¹ The use of the trademark Patient SafetyNet is under license from the University HealthSystem Consortium.

Table of Contents

Conventional Pulse Oximetry

Pulse oximetry enables the noninvasive measurement of the oxygen saturation level of arterial blood (SpO₂), which delivers oxygen to the body’s tissues. Pulse oximetry also measures pulse rate (PR), which, when measured by electrocardiogram (ECG), is called heart rate. Pulse oximeters use sensors attached to an extremity, typically the fingertip or certain core body sites. These sensors contain two light-emitting diodes that transmit red and infrared light from one side of the extremity through the tissue to a photodetector on the other side of the extremity. The photodetector in the sensor measures the amount of red and infrared light absorbed by the tissue. A microprocessor then analyzes the changes in light absorption to provide a continuous, real-time measurement of the amount of oxygen in the patient’s arterial blood. Pulse oximeters typically give audio and visual alerts, or alarms, when the patient’s arterial blood oxygen saturation level or pulse rate falls outside of a user-designated range. As a result, clinicians have the opportunity to assess patients who may need immediate treatment to prevent the serious clinical consequences of hypoxemia, or low arterial blood oxygen saturation levels, and hyperoxemia, or high arterial blood oxygen levels.

As one of the most common technologies used in and out of hospitals around the world, pulse oximetry has gained widespread clinical acceptance as a standard patient vital sign measurement because it can give clinicians a warning of possible hypoxemia or hyperoxemia. SpO₂ monitoring of oxygen saturation is critical because hypoxemia can lead to a lack of oxygen in the body’s tissues, which can be toxic and result in organ damage or death. Pulse oximeters are used in a variety of critical care settings, including surgery, recovery rooms, intensive care units (ICUs), emergency departments and general care floors, as well as alternative care settings, such as long-term care facilities, physician offices and the home monitoring of patients with chronic conditions.

Clinicians also use pulse oximeters to monitor oxygen saturation in premature babies to ensure that appropriate oxygen saturation levels are maintained. In premature babies, oxygen saturation levels above clinically acceptable limits may lead to a condition known as retinopathy of prematurity (ROP), which, if left untreated, can lead to permanent eye damage or blindness. By ensuring that oxygen saturation levels in babies remain within clinically acceptable limits, clinicians believe they can lower the incidence of ROP.

Conventional pulse oximetry has limitations that can reduce its effectiveness and the quality of patient care. In particular, when using conventional pulse oximetry, oxygen saturation measurements can be distorted by motion artifact, or patient movement, and low perfusion, or low arterial blood flow at the measurement site. Motion artifact can cause conventional pulse oximeters to inaccurately measure the arterial blood oxygen saturation level, due mainly to the effect of movement-induced pulsations of venous blood, which is at a lower oxygen saturation than arterial blood. Low perfusion can also cause conventional pulse oximeters to report inaccurate measurements or, in some cases, no measurement at all. In addition, conventional pulse oximeters cannot distinguish oxygenated hemoglobin from dyshemoglobin, including the most prevalent forms of dyshemoglobins, carboxyhemoglobin and methemoglobin. As a result, conventional pulse oximeters may report falsely high oxygen levels when these dyshemoglobins are present in the blood. Furthermore, conventional pulse oximetry readings can also be impacted by bright light and electrical interference caused by the presence of electrical surgical equipment.

Independent research has shown that over 70% of oxygen saturation alarms outside the operating room are false when conventional pulse oximetry is used. In the operating room, conventional pulse oximeters can fail to give accurate measurements due to weak physiological signals or low perfusion. Manufacturers of pulse oximeters have attempted to address some of these limitations with varying degrees of success. Some competing devices have attempted to minimize the observed effects of motion artifact by repeating/freezing the last measurement before motion artifact was detected until a new, clean signal is detected and a new measurement can be displayed. Other competing devices increase the averaging time during motion, known as long averaging, in an attempt to reduce the observed effect of motion on their measurements. Still other competing devices extend the audible alarm notification delay, which reduces awareness of inaccurate measurements. These competing “motion tolerant” or “alarm management” techniques mask the limitations of conventional pulse oximetry. Several published studies have demonstrated that these also contribute to increased occurrences of undetected true alarms, or events where hypoxemia occurs but is not detected by the pulse oximeter.

Lastly, because conventional pulse oximetry cannot consistently measure SpO₂ and pulse rate in the presence of motion artifact or low perfusion, its use is limited in lower acuity settings in the hospital, such as in general care areas, where a hospital’s staff-to-patient ratio is significantly lower and the staff have less tolerance for false alarms. In addition, two-wavelength pulse oximeters cannot distinguish oxygenated hemoglobin from dyshemoglobin, including the most prevalent forms of carboxyhemoglobin and methemoglobin. As a result of these dyshemoglobins, pulse oximeters will report falsely high oxygen levels when they are present in the blood.

Table of Contents

Masimo SET^® Pulse Oximetry

Masimo SET^® was designed to overcome the primary limitations of conventional pulse oximetry by maintaining accuracy in the presence of motion artifact, low perfusion and weak signal-to-noise situations. Our Masimo SET^® platform, which became available to U.S. hospitals in 1998, is the basis of our pulse oximetry products, and we believe represented the first significant technological advancement in pulse oximetry since its introduction in the early 1980s. Masimo SET^® utilizes five signal processing algorithms, four of which are proprietary, in parallel to deliver high sensitivity and specificity in the measurement of arterial blood oxygen saturation levels. Sensitivity is the ability to detect true alarms and specificity is the ability to avoid false alarms. One of our proprietary processing algorithms, Discrete Saturation Transform^®, separates the signal from noise in real time through the use of adaptive filtering and an iterative sampling technique that tests each possible saturation value for validity. Masimo SET^® signal processing can therefore identify the venous blood and other “noise”, isolate them and extract the arterial signal.

The performance of Masimo SET^® pulse oximetry has been evaluated in more than 100 independent studies and thousands of clinical evaluations. We believe that Masimo SET^® is trusted by clinicians to safely monitor in excess of approximately 100 million patients each year and has been chosen as the primary pulse oximeter technology used by nine of the top ten hospitals listed on the 2018-2019 U.S. News & World Report Best Hospitals Honor Roll. Compared to conventional pulse oximeters, during patient motion and low perfusion, Masimo SET^® provides measurements when other pulse oximeters cannot, significantly reduces false alarms (improved specificity), and accurately detects true alarms (improved sensitivity). Clinical studies have shown that the use of Masimo SET^® pulse oximetry, in conjunction with modified clinical protocols, has helped clinicians reduce ROP in neonates and improve screening for newborns with critical congenital heart disease (CCHD). Clinical studies have also shown a reduction in rapid response activations and ICU transfers when Masimo SET^® is used to continuously monitor patients on general wards. Additionally, researchers have found that the use of Masimo SET^® is associated with reduced ventilator weaning time and arterial blood gas measurements in the ICU.

Our pulse oximetry technology is contained on a circuit board which can be placed inside a standalone pulse oximetry monitor, placed inside OEM multiparameter monitors, or included as part of an external “Board-in-Cable” solution that is plugged into a port on an OEM or other device. All of these solutions use our proprietary single-patient-use or reusable sensors and cables. We sell our products to end users through our direct sales force and through certain distributors, as well as to our OEM partners, for incorporation into their products. In 2013, we also began selling our pulse oximetry products in the consumer market.

To complement our Masimo SET^® platform, we have developed a wide range of proprietary single-patient-use (disposable) and multi-patient-use (reusable) sensors, cables and other accessories designed specifically to work with Masimo SET^® software and hardware. Our single-patient-use sensors offer several advantages over reusable sensors, including improved performance, cleanliness, increased comfort and greater reliability. In addition, our neonatal adhesive sensors have been designed to exhibit greater durability compared to competitive sensors. Although our technology platforms operate solely with our proprietary sensor lines, our sensors have the capability to work with certain competitive pulse oximetry monitors through the use of adapter cables.

Adhesive sensors are single-patient-use items, but the U.S. Food and Drug Administration (FDA) allows third parties to reprocess pulse oximetry sensors. In response to some hospitals’ requests to implement environmentally friendly or “green” products, we offer sensor reprocessing as well as sensor recycling programs.

Masimo rainbowSET^™ Platform

Since introducing Masimo SET^®, we have continued to innovate by introducing noninvasive measurements that go beyond arterial blood oxygen saturation and pulse rate. In 2005, we introduced the Masimo rainbow SET^™platform, leveraging our Masimo SET^® technology and incorporating licensed rainbow^® technology to enable real-time monitoring of additional noninvasive measurements. Our rainbow SET^™ platform includes our rainbow SET^™ Pulse CO-Oximetry products, which we believe are the first devices cleared by the FDA to noninvasively and continuously monitor additional hemoglobin species that were previously only measurable using intermittent invasive procedures using multiple wavelengths of light. In addition to SpO₂, PR, perfusion index (Pi), Pleth Variability Index (PVi^®) and respiration rate from the pleth (RRp^®), rainbow^® Pulse CO-Oximetry has the unique ability to measure and distinguish oxygenated hemoglobins from the dyshemoglobins that are incapable of transporting oxygen, carboxyhemoglobin (SpCO^®) and methemoglobin (SpMet^®). Besides the ability to measure SpCO^® and SpMet^®, the Masimo rainbow SET^™ platform also allows for the noninvasive and continuous monitoring of total hemoglobin concentration (SpHb^®) as well as the monitoring of arterial oxygen saturation, in the presence of carboxyhemoglobin and methemoglobin, known as fractional arterial oxygen saturation (SpfO₂^™). Additionally, the rainbow SET^™ platform also allows for the calculation of Oxygen Content (SpOC^™) and Oxygen Reserve Index^™ (ORi^™). RRp^®, SpfO₂^™and ORi^™have received CE Marking, but are not currently available for sale in the U.S.

Table of Contents

We believe that Masimo rainbow^® Pulse CO-Oximetry products will become widely adopted for the noninvasive monitoring of these measurements. We also believe that the addition of acoustic respiration rate (RRa^®), using our rainbow Acoustic Monitoring^® technology, will strengthen the clinical demand for noninvasive and continuous monitoring using our rainbow^® platform, especially in the growing general floor market.

Products with our MX circuit board contain our Masimo SET^® pulse oximetry technology as well as circuitry to support rainbow^® measurements. At the time of purchase, or at any time in the future, our customers and our OEMs’ customers have the option of purchasing additional rainbow^® software measurements, which allow the customer to incrementally expand their patient monitoring systems with a cost-effective solution. To date, over thirty-four companies have released rainbow SET^™equipped products or announced rainbow^® integration plans.

Measurements

SpHb^®

Hemoglobin is the oxygen-carrying component of red blood cells (RBCs). Hemoglobin measurement is one of the most frequent invasive laboratory measurements in the world, and is often measured as part of a complete blood count (CBC), which measures multiple other blood components. A low hemoglobin status is a condition called anemia. As a chronic disorder, anemia can be treated by iron supplements, diet changes or drugs that increase the production of RBCs. As an acute disorder resulting from bleeding, anemia requires either stoppage of the bleeding or a blood transfusion in order to sustain organ function and life.

SpHb^®is available as a continuous or a spot-check measurement. Continuous SpHb^® monitoring provides real-time visibility into hemoglobin levels and the changes, or lack of changes, in hemoglobin levels, which can otherwise only be measured through intermittent, invasive blood testing. SpHb^® monitoring is not intended to be used as the sole basis for making diagnosis or treatment decisions, but continuous SpHb^® monitoring may help clinicians to trend hemoglobin in real time between invasive blood samples.

SpOC^™

The oxygen content of blood is a function of both oxygen saturation and hemoglobin levels. SpOC^™ provides a more complete picture of a patient’s oxygenation status by combining noninvasive and continuous measurements of both hemoglobin and oxygen saturation levels into a single calculation.

SpCO^®

Carbon monoxide (CO) is a colorless, odorless and tasteless gas that is undetectable by humans and is often unknowingly inhaled from combustion fumes, or during fires by victims and first responders. CO poisoning is the leading cause of accidental poisoning death in the U.S. and is responsible for up to 50,000 emergency department visits and 500 unintentional deaths annually. CO, when bound to hemoglobin cells, prevents those cells from carrying oxygen. Elevated CO levels may cause severe neurological damage, permanent heart damage or death. Screening for elevated CO levels in the emergency department is critical, as symptoms of CO poisoning in patients may be misdiagnosed because such symptoms are similar to the flu.

CO levels in the blood can be measured using a laboratory CO-Oximeter, which requires a patient or a patient’s blood sample to be transported to a hospital with laboratory CO-Oximetry capability. Additional delays occur if a patient needs hyperbaric oxygen therapy, which often requires transfer to yet another medical center with hyperbaric capability. Outside the hospital, laboratory measurements of carboxyhemoglobin are not considered feasible. Historically, this meant that CO levels in the blood could not be assessed in environments in which such assessment would be very useful, such as in the home or as part of the medical evaluation of first responders potentially exposed to CO at the scene of a fire.

We believe that the greatest opportunity for SpCO^® monitoring is in the EMS, fire and hospital emergency department settings, since elevated SpCO^® levels may help indicate a need for invasive testing in patients with headaches or other non-specific symptoms of CO poisoning. While SpCO^® is not intended to replace invasive carboxyhemoglobin tests, when used with other clinical variables, SpCO^® may help clinicians identify elevated CO levels and help determine additional test and treatment options. Over the past few years, multiple leading emergency first responder associations, including the National Association of Emergency Medical Technicians, the National Association of EMS Educators, the International Association of Fire Fighters and the International Association of Fire Chiefs, have educated their members on the benefits of noninvasive CO measurement when exposure is suspected or when an individual presents symptoms that could indicate elevated CO levels. In 2015, the National Fire Protection Association (NFPA), one of the world’s authoritative sources on fire prevention and public safety, released updated Fire Rehabilitation Standard 1584, Standard on the Rehabilitation Process for Members During Emergency Operations and Training Exercises, requiring firefighters exposed to smoke at incident scenes and during training to be assessed for elevated CO levels.

Table of Contents

SpMet^®

Methemoglobin in the blood leads to a dangerous condition known as methemoglobinemia, which occurs as a reaction to some common drugs used in hospitals and outpatient procedures. Methemoglobinemia reduces the amount of oxygen bound to hemoglobin for delivery to tissues and forces normal hemoglobin to bind more tightly to oxygen, releasing less oxygen to the tissues. Methemoglobinemia may go unrecognized or be subject to delayed diagnosis, increasing risk to the patient. Commonly prescribed drugs can introduce methemoglobin into the blood and cause methemoglobinemia. Some of the 30 drugs that are known to cause methemoglobinemia include benzocaine, a local anesthetic routinely used in procedures ranging from endoscopy to surgery; inhaled nitric oxide, routinely used in the Neonatal Intensive Care Unit; nitroglycerin, used to treat cardiac patients, and dapsone, used to treat infections for immune-deficient patients such as Human Immunodeficiency Virus (HIV) patients. Warnings, cautions and alerts regarding the clinical significance and prevalence of methemoglobinemia have been generated by the FDA, the Veterans Administration, the Institute for Safe Medication Practices and the National Academy of Clinical Biochemistry. The American Academy of Pediatrics recommends monitoring methemoglobin levels in infants who receive nitric oxide therapy. While SpMet^® is not intended to replace invasive methemoglobin tests, when used with other clinical variables, SpMet^® may help clinicians identify elevated methemoglobin levels and help determine additional test and treatment options.

PVi^®

PVi^® is a measure of the dynamic changes in the Pi that occur during the respiratory cycle. The calculation is accomplished by measuring changes in Pi over a time interval where one or more complete respiratory cycles have occurred. PVi^® is displayed as a percentage. The lower the number, the less variability there is in Pi over a respiratory cycle. PVi^® may show changes that reflect physiologic factors such as vascular tone, circulating blood volume and intrathoracic pressure excursions. When used with other clinical variables, PVi^® may help clinicians assess fluid responsiveness in surgical and intensive care patients who are mechanically ventilated, and help determine other treatment options.

RPVi^™

Rainbow^® Pleth Variability Index (RPVi^™) is a multi-wavelength version of PVi^®that is designed to provide enhanced specificity to changes in fluid volume compared to PVi^®. Similar to PVi^®, RPVi^™ is displayed as a percentage and is calculated by measuring changes in Pi over a time interval where one or more complete respiratory cycles have occurred. The lower the number, the less variability there is in Pi over a respiratory cycle, which indicates more fluid in the body. RPVi^™has received the CE Mark, but is not currently available for sale in the U.S.

RRp^®

Respiration rate is defined as the number of breaths per minute. Changes in respiration rate provide an early warning sign of deterioration in patient condition. A low respiration rate is indicative of respiratory depression and high respiration rate is indicative of patient distress. Current methods of monitoring respiration rate include end tidal carbon dioxide (EtCO₂) monitoring, which requires a nasal cannula be inserted in the patient’s nose or a mask to be worn, and therefore has low patient compliance; and impedance monitoring, which is considered unreliable and requires the placement of ECG electrodes on the chest. RRp^® allows clinicians to noninvasively and continuously measure and monitor respiration rate using a standard Masimo SET^® pulse oximetry sensor or rainbow^® Pulse CO-Oximetry sensor. RRp^® is determined by the variations in the plethysmograph waveform due to respiration, although the measurement is not possible in all patients or conditions and may not immediately indicate changes in respiration rate. RRp^®has received the CE Mark, as well as FDA 510(k) clearance when used in healthcare settings with the MightySat^® Rx fingertip SET^® pulse oximeter. RRp^® is also available in the U.S. for use by consumers for general health and wellness purposes as part of our MightySat^® fingertip pulse oximeter.

RRa^®

Our sound-based monitoring technology, rainbow Acoustic Monitoring^® (RAM^®), enables RRa^®and provides continuous and noninvasive monitoring of respiration rate. For patients requiring accurate and sensitive respiration rate monitoring, we believe that RRa^® better detects pauses in breathing than respiration rate measurements from other technologies such as EtCO₂ monitoring and RRp^®. RRa^® also provides an important visual indication of breathing through a displayed acoustic waveform. Multiple clinical studies have shown that the noninvasive measurement of acoustic respiration rate provides as good or better respiration rate monitoring accuracy as EtCO₂monitoring, and can reliably detect episodes of respiratory pause, defined as the cessation of breathing for 30 seconds or more. When used with other clinical variables, RRa^® may help clinicians assess respiratory depression and respiratory distress earlier and more often to help determine treatment options and potentially enable earlier interventions.

Table of Contents

SpfO₂^™

Prior to our debut of SpfO₂^™, pulse oximeters could only measure and display functional SpO₂oxygen saturation. Therefore, when patients had elevated carboxyhemoglobin and/or elevated methemoglobin, the displayed functional SpO₂ oxygen saturation overestimated the actual oxygen saturation value. SpfO₂^™, or fractional oxygen saturation, allows more precise arterial oxygenation assessment in patients with elevated dyshemoglobins, common throughout the hospital and pre-hospital setting, compared to functional oxygen saturation, and may also allow earlier interventions and more timely therapeutic decisions. SpfO₂^™ has received CE Mark, but is not currently available for sale in the U.S.

ORi^™

ORi^™ provides real-time visibility to oxygenation status in moderate hyperoxic range, which we define as a patient’s oxygen “reserve”. ORi^™ can be trended and has optional alarms to notify clinicians of changes in a patient’s oxygen reserve. When this technology is used with SpO₂ monitoring, ORi^™ may extend the continuous and noninvasive visibility of a patient’s oxygen status into ranges previously unmonitored in this fashion. ORi^™ may also be of value in patients receiving supplemental oxygen, such as those in surgery, under conscious sedation or in the ICU, as ORi^™is represented as an “index” parameter with a unit-less scale between 0.00 and 1.00. Furthermore, ORi^™ may provide an advance warning of an impending hypoxic state, or an indication of an unintended hyperoxic state, when evaluated in conjunction with the partial pressure of oxygen (PaO₂). In this way, ORi^™ may assist in determining the need for proactive interventions to avoid hypoxia or unintended hyperoxia. ORi^™ has received the CE Mark, but is not currently available for sale in the U.S.

Other Noninvasive Measurements and Technologies

Following the introduction of our rainbow SET^™ platform, we have continued to expand our technology offerings by introducing additional noninvasive measurements and technologies to create new market opportunities in both hospital and non-hospital care settings.

SedLine^® Brain Function Monitoring

Brain function monitoring is most commonly used during surgery to help clinicians avoid over-titration and under-titration of anesthesia and sedation. SedLine^® brain function monitoring technology measures the brain’s electrical activity by detecting EEG signals. In contrast to whole-scalp EEG monitoring, which is used for diagnostic purposes, this form of EEG monitoring is often referred to as processed EEG monitoring or brain function monitoring. Brain function monitors display the patient’s EEG waveforms, but these may be difficult for clinicians to interpret. With SedLine^® technology, EEG signals are processed and displayed as a single number called the Patient State Index (PSi), which gives a continuous quantitative indication of the patient’s depth of anesthesia and sedation. SedLine^® brain function monitoring technology also displays raw EEG waveforms, the PSi trend and a Density Spectral Array view, which allows clinicians to compare EEG power in both sides of the brain over time to facilitate the detection of asymmetrical activity and agent-specific effects on the EEG signal.

SedLine^® brain function monitoring technology is available on Root^™ through the use of a Masimo Open Connect^® (MOC-9^®) connectivity port. The Root^™ patient monitoring and connectivity platform integrates rainbow^® and SET^® measurements with measurement technologies, such as SedLine^®.

NomoLine^® Capnography and Gas Monitoring

We offer a portfolio of capnography and gas monitoring products ranging from external “plug-in-and-measure” capnography and gas analyzers, integrated modules, handheld capnograph and capnometer devices, and capnography sampling lines. These products have the ability to measure multiple expired gases, such as carbon dioxide (CO₂), nitrous oxide (N₂O), oxygen (O₂) and other anesthetic agents. In addition, respiration rate is calculated from the CO₂ waveform. These measurements are possible through either mainstream monitoring, which samples gases from a ventilated patient’s breathing circuit, or sidestream monitoring, which samples gases from a breathing circuit in mechanically ventilated patients or through a cannula or mask in spontaneously breathing patients. These capnography and gas measurements are standard-of-care in many hospital environments, such as operating rooms and ICUs, during procedural sedation.

In November 2017, we released the full family of NomoLine^® capnography sampling lines to the U.S. market. NomoLine^® sampling lines are available in more than 40 configurations of airway adapter sets and cannulas for use in a variety of clinical scenarios on both intubated and non-intubated adult, pediatric, infant and neonatal patients, in both low and high humidity configurations. NomoLine^® capnography sampling lines are compatible with both Masimo and many third-party OEM monitors facilitating easy to use sidestream capnography and gas monitoring. NomoLine^® capnography sampling lines have received FDA 510(k) clearance.

Table of Contents

O3^® Regional Oximetry

O3^® regional oximetry, also known as tissue or cerebral oximetry, uses near-infrared spectroscopy (NIRS) to provide continuous measurement of tissue oxygen saturation (rSO₂) to help detect regional hypoxemia, or oxygen deficits in specific tissues such as the brain, that pulse oximetry alone cannot detect under certain conditions. In addition, O3^® sensors, in conjunction with our Root^™ monitor, can automate the differential analysis of regional to central oxygen saturation derived from SET^® pulse oximeters. O3^® monitoring involves applying O3^® regional oximetry sensors to the forehead and connecting the O3^® MOC-9^® module to a Root^™ monitor through one of its three MOC-9^® ports. O3^®regional oximetry has received CE Mark and FDA 510(k) clearance for use in adult and pediatric patients.

Patient SafetyNet

Patient SafetyNet, our patient surveillance, remote monitoring and clinician notification solution, works in concert with our bedside and ambulatory monitoring devices to facilitate the supplemental monitoring of the oxygen saturation, pulse rate, perfusion index, hemoglobin, methemoglobin, and respiration rate of up to 200 patients simultaneously from a single server. Patient SafetyNet offers an intuitive and powerful user interface with trending, real-time waveform capability at a central station, as well as remote clinician notification via pager, Voice-over-IP phone or smart-phones. Patient SafetyNet also features an Adaptive Connectivity Engine^™(ACE) that enables two-way, HL-7 based connectivity to clinical/hospital information systems. The ACE significantly reduces the time and complexity to integrate and validate custom HL-7 implementations, and demonstrates our commitment to innovation that automates patient care with open, scalable, and standards-based connectivity architecture.

Patient SafetyNet Series 5000^™, along with Iris^® Connectivity, Iris Gateway^®, Kite^®, UniView^™ and MyView^® through the Root^™ patient monitoring and connectivity platform, offers a new level of interoperability designed to enhance clinician workflows and reduce the cost of care in a variety of hospital settings, including operating rooms and the general care floors. Patient SafetyNet Series 5000^™ with Iris^® enables Root^™ to assimilate data from all devices connected to the patient, thereby acting as a comprehensive in-room patient monitor and connectivity hub. Alarms and alerts for all devices are seamlessly forwarded to the patient’s clinician and device data can be transferred to the patient’s electronic medical record (EMR). The patient-centric user interface of the Patient SafetyNet Series 5000^™ displays near real-time data from all devices with Kite^®, providing a single unified dashboard of patient information. To simplify documentation of patient data, Root^™ enables clinicians to easily verify and send patient vitals and Early Warning Scores (EWS), as well as all connected medical device information data, to the EMR directly from Root^™. An interface between the Patient SafetyNet Series 5000^™ and the hospital admission, discharge and transfer (ADT) system allows clinicians to receive ADT information on Root^™ for positive patient identification at the bedside. Clinicians can also manually enter additional data on the Root^™ device, including temperature, blood pressure, level of consciousness, pain score and urine output.

In an article published in 2010 by Dartmouth-Hitchcock Medical Center, clinicians using Masimo SET^® and Patient SafetyNet identified patient distress earlier, which decreased rapid response team activations, ICU transfers and ICU days. Hospitals and other care centers may determine that they can reduce their costs by moving less critically ill patients from the ICU to the general care floors where they can be continuously and accurately monitored in a more cost-effective manner. We believe that the advanced performance of the Masimo SET^® platform coupled with reliable, cost-effective and easy-to-use wireless remote monitoring will allow hospitals to create continuous surveillance solutions on general care floors where patients are at risk of avoidable adverse events and where direct patient observation by skilled clinicians is considered cost prohibitive.

MyView^®

MyView^® is a wireless, presence-detection system that enables the display of customized clinical profiles on Masimo devices, such as Root^™, Radical-7^® and the Patient SafetyNet View Station. When a clinician approaches the device, a clinician-worn MyView^® badge signals the device to display a preselected set of parameters and waveforms tailored to the individual clinician’s preferences. MyView^® gives clinicians the ability to receive and review medical device information in a manner that is most conducive to optimizing their workflow, while the presence mapping data collected by all the Masimo devices can provide insight into how clinicians spend time with patients. This provides nursing leadership and management the opportunity to examine analytical data on patient-clinician interactions and optimize workflows across the unit, hospital and hospital system.

Patient SafetyNet Surveillance

Patient SafetyNet Surveillance is a software option that provides real-time video images of a patient’s room, including the patient and connected monitoring devices, adding existing communication technology to central monitoring. Two-way audio is available to allow the caregiver to listen to and communicate with the patient. The system utilizes the existing hospital information technology network, precluding the installation of additional infrastructure.

Table of Contents

Trace^™

Trace^™ is a patient data visualization and reporting software designed for Masimo Root^™ and Radical-7^® monitors. Trace^™ is the first data visualization and reporting software compatible with the full capabilities of the Masimo Root^™ Patient Monitoring and Connectivity Platform, including Radical-7^® and Radius-7^®Pulse CO-Oximeters^®, Root^™ with integrated noninvasive blood pressure and temperature, and connected MOC-9^® modules such as SedLine^®brain function monitoring, NomoLine^® capnography and O3^® regional oximetry.

Third-Party Device Connectivity

Despite medical technology advances, the lack of device communication and integration creates risks to patient safety in hospitals around the world. Without device interoperability, critical patient information can go unnoticed, leaving clinicians unaware and patients at risk. Existing approaches for device interoperability require separate hardware, software and/or network infrastructure, which can clutter the patient room, increase complexity, burden IT management and increase costs. To address these challenges, we introduced Iris^® connectivity in our Root^™ patient monitoring and connectivity platform. Iris^® connectivity enables multiple standalone third-party devices such as intravenous pumps (IV), ventilators, hospital beds and other patient monitors to connect through Root^™, enabling display, notification and documentation to the EMR through Masimo Patient SafetyNet.

The addition of Iris^® connectivity to Root^™ and Patient SafetyNet provides multiple advantages to hospitals, such as allowing standalone device information to be remotely viewed at a Patient SafetyNet view station, transmitted through notification systems to clinicians regardless of location or sent to electronic health record systems. This may enhance patient assessment, clinical workflows and decision support. In addition, bringing data from disparate devices together facilitates more integrated patient care, and provides a flexible and cost-effective platform, avoiding installation of separate costly systems and potentially reducing costs by leveraging existing network infrastructure.

Our Strategy

Our mission is to develop technologies that improve patient outcomes and reduce the cost of patient care. We intend to continue to grow our business and improve our market position by pursuing the following strategies:

•

Continue to Expand our Market Share in Pulse Oximetry. We grew our product revenue to $829.9 million in 2018 from $599.3 million in 2015, representing a three-year compound annual growth rate of 11.5%. This growth can be attributed to continued expansion of our core SET^® pulse oximeter customer base, higher revenues from rainbow^®Pulse CO-Oximetry, NomoLine^® capnography and other new technologies, and our expanding list of OEM partners. We supplement our direct sales to hospitals and other low-acuity healthcare facilities through various U.S. and international distributors. Combined sales through our direct and distributor sales channels increased to $718.6 million, or 86.6% of product revenue in 2018, from $508.2 million, or 84.8% of product revenue, in 2015. As the healthcare industry shifts toward hospitals, physicians and providers being rewarded by payers based on the quality and value of the services (as opposed to the volume of fee-for-service transactions), we expect to see more hospitals gravitate towards technologies like Masimo SET^® that have a proven track record of improving patient care.

•

Expand the Pulse Oximetry Market to Other Patient Care Settings. Many patients die due to unintended opioid overdoses after surgery while on general care floors. We believe the ability to continuously and accurately monitor patients outside of critical care settings, including the general, medical and surgical floors of the hospital, is currently an unmet medical need that has the potential to significantly improve patient care and increase the size of the pulse oximetry market. In addition, we believe the ability of Masimo SET^® to accurately monitor and address the limitations of conventional pulse oximetry has enabled us, and will continue to enable us, to expand into non-critical care settings, and therefore, significantly expand the market for our products. To further support our expansion into the general care areas, we market Patient SafetyNet, which enables continuous monitoring of up to 200 patients’ oxygen saturation, pulse rate and with rainbow SET^™, noninvasive hemoglobin and respiration rate. We believe that Patient SafetyNet, when combined with Masimo SET^® pulse oximetry and RAM^® or capnography, offers a clinically proven and cost-effective approach to continuous post-operative monitoring. Outside of the hospital setting, patients could die due to unintentional opioid overdose, even when opioids are being taken for short duration, such as after surgery, and as prescribed by a physician. We believe that in the home setting, accurate monitoring with Masimo SET^® may help reduce the risk of opioid overdose by alerting family members and others when opioids have slowed a patient’s breathing and caused a significant drop in oxygen saturation.

•

Expand the Use of rainbow^® Technology in Hospital Settings. We believe the noninvasive measurement of rainbow^® Pulse CO-Oximetry (SpHb^®, SpCO^®, SpMet^®, PVi^®, SpfO₂^™, SPOC^™ and ORi^™), rainbow Acoustic Monitoring^® (RRa^®), and the Halo Index^™, as well as future measurements, provide an excellent opportunity to help our customers improve patient care while reducing their overall cost of care.

Table of Contents


•	Expand the Use of rainbow^® Technology in Non-Hospital Settings. We believe the noninvasive measurement of hemoglobin, SpHb^®,creates a significant opportunity in markets such as the physician office, emergency departments and blood donation centers; and the noninvasive measurement of carboxyhemoglobin, SpCO^®, creates a significant opportunity in the fire/alternate care market.

•

Expand the Use of Root^™ in Hospital Settings. We believe Root^™ represents a powerful new paradigm in patient monitoring because it enhances our rainbow^® and SET^® measurements with multiple specialty parameters, including SedLine^® brain function monitoring, O3^®regional oximetry, and NomoLine^® capnography and gas monitoring, and enables open-architecture connectivity in an integrated, clinician-centric hub. Our Iris^® integration platform for Root^™ provides a conduit to the patient’s EMR for a range of clinical devices that may otherwise remain disconnected, and therefore, unable to communicate their information. Iris^® offers clinical utility and flexibility by collecting device information from multiple sources and making it available to clinicians in one networked place, akin to an airplane cockpit. Complementary innovations like the Radius-7^® wearable, wireless monitor foster an environment of safety without sacrificing patient mobility or comfort. Radius-7^® provides patients in medical-surgical units with mobility, allowing them to visit common areas and labs, all while being continuously monitored around the clock. Root^™ is acuity-adaptable, meaning it can be configured for any care area, and is competitively priced.

•

Utilize our Customer Base and OEM Relationships to Market Masimo rainbow SET^™, O3^®, SedLine^®and Capnography Products Incorporating Licensed rainbow^® Technology. We currently sell rainbow SET^™ products through our direct sales force and distributors. We include our MX circuit boards in our pulse oximeters and also sell them to our OEM partners. Our MX circuit boards are equipped with circuitry to support rainbow^® Pulse CO-Oximetry measurements that can be activated at time of sale or through a subsequent software upgrade. We believe that, over time, the clinical need for these measurements, along with our installed customer base, will help drive the adoption of our rainbow^® Pulse CO-Oximetry products.

•

Continue to Innovate and Maintain Our Technology Leadership Position. We invented and pioneered the first pulse oximeter to accurately measure arterial blood oxygen saturation level and pulse rate in the presence of motion artifact and low perfusion. In addition, we launched our rainbow SET^™ platform that enabled what we believe is the first noninvasive monitoring of carboxyhemoglobin, methemoglobin and hemoglobin, as well as PVi^®, all of which were previously only available with invasive and/or complicated testing. Furthermore, we believe that our introduction of RRa^®with rainbow Acoustic Monitoring^® technology represented the first platform to enable noninvasive and continuous respiration monitoring through an easy-to-use single-patient adhesive acoustic sensor. Finally, we believe that our recent introduction of ORi^™ may provide advance warning of an impending hypoxic state, or an indication of an unintended hyperoxic state.

We plan to continue to innovate and develop new technologies and products, internally and through our collaboration with Cercacor, from whom we currently license certain rainbow^® technologies.

Our future growth strategy is also closely tied to our focus on international expansion opportunities. Since 2007, we have continued to expand our sales and marketing presence in Europe, Asia, Asia Pacific, Middle East, Canada and Latin America. We have accomplished this by both additional staffing and adding or expanding sales offices in many of these territories. By centralizing a portion of our international operations, including sales management, marketing, customer support, planning, logistics and administrative functions, in Neuchâtel, Switzerland, we believe we have developed a more efficient and scalable international organization that is capable of being even more responsive to the business needs of our international customers under this centralized management structure.

Our Products and Markets

We develop, manufacture and market patient monitoring technologies that incorporate a monitor or circuit board and sensors, including proprietary single-patient-use and reusable sensors and patient cables. In addition, we offer remote alarm/monitoring solutions, software and connectivity solutions.

Table of Contents

The following chart summarizes our principal product components and principal markets and methods of distribution:



Patient Monitoring Solutions:

Description:	Use:	Distribution Channel:
Circuit Boards and Modules (e.g., MX-3 (shown below), MX-5(shown below), MS-2011, MS-2013, MS-2040, uSpO2^®, SedLine^®, ISA^™ and IRMA^™)
	• Signal processing apparatus for all Masimo technology platforms • Mainstream and sidestream capnography and gas monitoring	• Incorporated and sold to OEM partners who incorporate our circuit boards into their patient monitoring systems



Monitors and Devices (e.g., Radical-7^®, Rad-97^™ (both shown below), Rad-67^™, Rad-87^®, Rad-57^®, Pronto-7^®, Root^™, Rad-8^®, Rad-5^® and Radius-7^®)
	• Bedside, handheld and wireless monitoring devices that incorporate Masimo SET^® with and without licensed Masimo rainbow SET^™ technology, noninvasive blood pressure and capnography.	• Sold directly to end-users and through distributors and in some cases to our OEM partners who sell to end-users

Table of Contents



Description:	Use:	Distribution Channel:
Patient Monitoring and Connectivity Platform (e.g., Root^™,Radius-7^®and Root^™ with NIBP (shown below))
	• Displays measurements from Masimo’s Radical-7^® (connected or hand carried) or Radius-7^® (patient-worn) • Provides additional specialty measurements from Masimo or third-party-developed applications through Masimo Open Connect^® (MOC-9^®) • Integrates noninvasive blood pressure (NIBP) and temperature • Connects third-party devices such as IV pumps, ventilators, beds and other patient monitors to automate data transfer to the EMR	• Sold directly to end-users and through distributors
		• Sold directly to end-users and through distributors


Sensors (e.g., SET^®, rainbow^® Pulse CO-Oximetry, rainbow Acoustic Monitoring^® Sensors, RD SedLine^®, TFA-1^®, RD rainbow SET^™ O3^® Pediatric, RD rainbow Lite SET^®, rainbow^® DCI^®-Mini (last four shown below))
	• Extensive line of both single-patient, reusable and rainbow^® sensors • Patient cables, as well as adapter cables that enable the use of our sensors on certain competitors’ monitors	• Sold directly to end-users and through distributors and to OEM partners who sell to end-users

Table of Contents



Description:	Use:	Distribution Channel:
Line Filters and Mainstream Adapters for Capnography and Gas Monitoring. (e.g., NomoLine^® Cannula with EMMA^® Capnograph with disposable adapter (shown below))
	• Line of disposables to measure gas parameters using mainstream and sidestream capnography	• Sold directly to end-users and through distributors and to OEM partners who sell to end-users

Remote Alarm and Supplemental Monitoring Solutions (e.g., Patient SafetyNet)
	• Network-linked, wired or wireless, multiple patient floor monitoring solutions • Standalone wireless alarm notification solutions	• Sold directly to end-users

Proprietary Measurements (e.g., SpHb^®, SpCO^®, SpMet^®, PVi^®, RRa^®, ORi^™, 3D Alarms^® and Adaptive Threshold Alarm)
	• rainbow^® measurements and other proprietary features	• Sold directly to end-users and through OEM partners who sell to new and existing end-users

Table of Contents



Description:	Use:	Distribution Channel:
Connectivity (e.g., Iris^® Connectivity, Connectivity Solutions and UniView^tm (Shown below))
	• Software and hardware enabling third-party devices to connect through Patient SafetyNet and to document data in the EMR	• Sold directly to end-users

Table of Contents

Circuit Boards

Masimo SET^® MS Circuit Boards. Our Masimo SET^® MS circuit boards perform all signal processing and other pulse oximetry functions incorporating the Masimo SET^® platform. Our MS circuit boards are included in our proprietary monitors or sold to our OEM partners for incorporation into their monitors. Once incorporated into a pulse oximeter, the MS circuit boards perform all data acquisition processing and report the pulse oximetry measurements to the host monitor. The circuit boards and related software interface directly with our proprietary sensors to calculate SpO₂, PR and Pi. Our latest generation boards include the MS-2003, MS-2011, MS-2013 and MS-2040, with a typical power consumption of less than 45 milliwatts.

Masimo rainbow SET^™ MX Circuit Boards. Our next-generation circuit board is the foundation for our Masimo rainbow^® Pulse CO-Oximetry and rainbow Acoustic Monitoring^® platform, utilizing certain technology that is licensed from Cercacor. The MX circuit boards offer full the functionality of our rainbow^® technology, which includes noninvasive measurements for SpHb^®, SpOC^™, SpCO^®, SpMet^®, PVi^® and RRa^®, in addition to providing Measure-through Motion and Low Perfusion^® SET^® pulse oximetry measurements SpO₂, PR and Pi measurement capabilities of Masimo SET^® pulse oximetry. Customers can choose to purchase additional measurements beyond SpO_2, PR and Pi at the time of sale or at any time in the future through a field-installed software upgrade.

Our MX-5 OEM circuit board deploys a technology platform that utilizes approximately half the power of previously available rainbow^® circuit boards to deliver rainbow^® Pulse CO-Oximetry noninvasive measurement performance. In addition to its lower power demands, the MX-5 adds dynamic power utilization to scale the MX-5’s power draw based upon the combination of parameters being monitored to permit even longer battery run-times.

uSpO₂^® Cable/Board. Our SET^® technology-in-a-cable contains the low power (MS-2040) technology in a reduced size, allowing it to be embedded into patient cables as part of the sensor connector. This allows the uSpO₂^® cable/board to interface with monitoring devices externally via an existing communications port in instances where internal integration of a traditional Masimo SET^® technology board is not feasible. The uSpO₂^® cable/board provides the same Masimo SET^® Measure-through Motion and Low Perfusion^® pulse oximetry found in our other products, with a typical power consumption of less than 45 milliwatts.

Table of Contents

Monitors / Devices

Root^™. Root^™ is a powerful patient monitoring and connectivity platform that integrates our rainbow^® and SET^® measurements with multiple additional specialty measurements through MOC-9^® open architecture technology in an integrated, clinician-centric platform. The first MOC-9^® technologies developed by Masimo were SedLine^® brain function monitoring, NomoLine^® capnography and gas monitoring and O3^® regional oximetry. Root^™ with NomoLine^® capnography, SedLine^® brain function monitoring, wireless communication and Iris^® connectivity for third-party medical devices has received FDA 510(k) clearance. O3^® regional oximetry has received CE Mark and FDA 510(k) clearance.

EWS for Root^™ aggregates information from multiple vital signs and clinical observations to generate a score that represents the potential degree of patient deterioration. There are several EWS protocols, such as the Pediatric Early Warning Score (PEWS), Modified Early Warning Score (MEWS) and National Early Warning Score (NEWS). These various scores require vital signs contributors such as oxygen saturation, pulse rate, respiration rate, body temperature and systolic blood pressure along with contributors input by clinicians, such as level of consciousness, use of supplemental oxygen and urine output. The weighting and number of contributors differ depending upon which EWS protocol is used. Root^™ can be customized for various predefined EWS protocols, or hospitals can configure their own set of required contributors, and their relative weights, to create an EWS unique to their care environment.

Our MOC-9^® partnerships enable third parties to utilize Root^™’s open architecture and built-in connectivity to independently develop, obtain regulatory approvals, and commercialize their own external MOC-9^® module. Alternatively, third parties can develop Masimo Open Connect Control (MOC-C^™) applications for Root^™ using the MOC-9^® software development kit (SDK). While we support the development efforts of our MOC^® partners as needed, and help increase awareness of the availability of non-Masimo MOC-9^® modules and MOC-C^™ applications, our MOC-9^® partners use their existing distribution channels to sell their MOC-9^® modules or MOC-C^™ applications to customers.

In July 2018, we announced the Vital Signs Check application for Root^™. Vital Signs Check is an integrated patient data collection and workflow application that augments Root’s^™ versatility by helping to streamline hospital vital signs testing and optimize patient data management through automated patient association, centralized data collection, and immediate electronic charting at the bedside.

Radical-7^®. The Radical-7^® Pulse CO-Oximeter^® is a wireless touchscreen device that incorporates our MX circuit board to allow upgradable rainbow SET^™ measurements and offers three-in-one capability. The Radical-7^®can be used as:


•	a standalone device for bedside monitoring;


•	a detachable, battery-operated handheld unit for easy portable monitoring;


•	an integrated device as part of the Root^™ patient monitoring and connectivity platform; and


•	a monitor interface via SatShare^®, a proprietary technology allowing our products to work with certain competitor products, to upgrade existing conventional multiparameter patient monitors to Masimo SET^® while displaying rainbow^® measurements on the Radical-7^® itself.

With its wide-ranging flexibility, Radical-7^® can continuously monitor a patient from the ambulance, to the emergency room, to the operating room, to the general floor and beyond, until the patient is discharged. Radical-7^® delivers the accuracy and reliability of Masimo rainbow SET^™ with multi-functionality, ease of use and the availability of measurement upgrades for existing monitors.

Radius-7^®. Radius-7^® for the Root^™patient monitoring and connectivity platform is the first and only wearable, wireless monitor with rainbow SET^™ technology, enabling continuous monitoring and early identification of clinical deterioration while still allowing patients the freedom of movement. With Bluetooth^® and Wi-Fi wireless connectivity, Radius-7^® with Root^™ can alert clinicians at the bedside or remotely, through Masimo Patient SafetyNet, of critical changes in a patient’s SpO₂and PR, even during states of motion and low perfusion, as well as RRa^®and additional rainbow SET^™ measurements. Radius-7^® with Root^™ has received both CE Mark and FDA 510(k) clearance.

Rad-97^™. Rad-97^™ is a versatile standalone Pulse CO-Oximeter^® that features a 1080p HD color display with user-friendly multi-touch navigation and Measure-through Motion and Low Perfusion^® SET^® that can be used to measure SpO₂, PR, PVi^® and Pi. rainbow SET^™ measurements such as SpHb^®, SpOC^™, SpCO^®, SpMet^® and RRa^® can also be enabled. Rad-97^™ is the smallest Masimo bedside device currently capable of monitoring the full rainbow SET^™ platform. Rad-97^™ has received CE Mark. In September 2017, we announced FDA 510(k) clearance and full market release of Rad-97^™, including an additional Rad-97^™ configuration with integrated NomoLine^® capnography. Rad-97^™ has also received FDA 501(k) clearance for home use, bringing hospital-grade technology to the home in a single integrated device that is a monitoring, connectivity and telecommunications hub.

Table of Contents

An optional integrated camera allows remote clinicians to interact with patients at home over live audio and video. With its built-in enterprise Wi-Fi capability, Rad-97^™ has the ability to connect wirelessly from the home to supplemental patient monitoring systems, including Patient SafetyNet, facilitating automatic data transfer to hospital EMR systems.

Rad-97^™NIBP. Rad-97^™NIBP includes an integrated port that allows clinicians to connect a blood pressure cuff inflation hose directly to the device. Designed for reliability and patient comfort, Rad-97^™NIBP is compatible with both disposable and reusable cuffs for a variety of patient types. Rad-97^™NIBP enables clinicians to measure arterial blood pressure for adult, pediatric and neonatal patients, with three measurement modes: spot-check, automatic interval (which measures blood pressure routinely, at a desired interval) and stat interval (which continually measures blood pressure for a desired duration). In March 2017, we announced the CE Mark of the Rad-97^™NIBP. In September 2017, we announced FDA 510(k) clearance and full market release of Rad-97^™ NIBP.

Rad-67^™. Rad-67^™, ourhandheld Pulse CO-Oximeter^®, is a compact, portable spot-check device that offers Measure-through Motion and Low Perfusion^® SET^® pulse oximetry and upgradeable rainbow^® noninvasive monitoring technology. With the universal reusable rainbow^® DCI^®-mini sensor, Rad-67^™ features Next Generation SpHb^® technology. In June 2017, we announced the limited market release of the Rad-67^™. The Rad-67^™ with next generation SpHb^® technology has received the CE Mark, but is not currently available for sale in the U.S.

Rad-57^®. Rad-57^® is a fully featured handheld Pulse CO-Oximeter^® that provides continuous, noninvasive measurement of SpO₂, PR, PVi^® and Pi with the ability to upgrade to SpHb^®, SpCO^®, SpMet^®and SpOC. Its rugged and lightweight design makes it applicable for use in hospital and field settings, specifically for fire departments and emergency medical service units.

Rad-8^®. Rad-8^® is a bedside pulse oximeter featuring Masimo SET^® (without the ability to update to rainbow^® technology) in a low cost design and with a streamlined feature set.

Rad-5^®/Rad-5v^®. Rad-5^®and Rad-5v^® were Masimo’s first dedicated lightweight, user-configurable, handheld pulse oximeters to provide Masimo SET^® SpO₂, PR and Pi measurement (without the ability to upgrade to rainbow^® technology).

Rad-G^™. Rad-G^™ is a low-cost, rugged, handheld pulse oximetry device with a rechargeable battery and LCD display. It uses Measure-through Motion and Low Perfusion^® SET^® pulse oximetry technology to measure SpO₂, PR, Pi and RRp^®. Rad-G^™was designed primarily for use in pneumonia screening and spot-checking of SpO₂ in low-resource settings. Rad-G^™ is not currently available for sale in the U.S.

Pronto^®. Pronto^® is a handheld noninvasive multiparameter testing device that uses Masimo rainbow SET^™ technology to provide spot-check measurement of SpO₂, PR, Pi and SpHb^® in both hospitals (i.e., emergency departments) and remote settings such as physician offices.

SatShare^®. Our SatShare^® technology enables a conventional monitor to receive continuous measurement updates using Masimo SET^® through a simple cable connection from the back of Radical-7^® to the sensor input port on the conventional monitor. No software upgrades or new modules are necessary for the upgrade, which can be completed in minutes. SatShare^® allows hospitals to standardize the technology and sensors used throughout the hospital while allowing them to gain the more accurate monitoring capabilities using Masimo SET^®, as well as other additional functionality, in a cost-effective manner. SatShare^® technology has facilitated many hospital-wide conversions of previously installed competitor monitors to Masimo SET^®. In addition, Masimo rainbow SET^™ measurements such as SpHb^® are available to clinicians on the Radical-7^® itself while the device is being used in SatShare^® mode.

MightySat^® Rx. MightySat^® Rx is a fingertip pulse oximeter that incorporates Masimo Measure-through Motion and Low Perfusion^® SET^®technology, which measures and displays SpO₂, PR and Pi with the option to add PVi^® and RRp^®. The MightySat^® Rx (without RRp^®) has received CE Mark and FDA 510(k) clearance. In February 2017, we announced the CE Mark of the RRp^® measurement on the MightySat^® Rx fingertip pulse oximeter.

iSpO₂Rx^™. The iSpO₂ Rx^™ pulse oximeter combines a fingertip sensor, cable and pulse oximeter in a lightweight, portable device that connects directly to a smart device for displaying measurements. iSpO₂Rx^™ uses Measure-through Motion and Low Perfusion^® SET^® technology to measure SpO₂, PR and Pi. The Masimo Professional Health app, available for both iOS^® and Android devices, allows clinicians to track, trend and download patient data. iSpO₂Rx^™ has received the CE Mark, but is not currently available for sale in the U.S.

SedLine^® MOC-9^® Module. Our SedLine^® MOC-9^® module for Root^™ is an EEG-based continuous brain function monitor that provides information about a patient’s response to anesthesia. Our Next Generation SedLine^® enhances PSi to make it less susceptible to EMG interference and to improve performance in low-power EEG cases.

Table of Contents

O3^® MOC-9^® Module. Our O3^® MOC-9^®module for Root^™uses NIRS to detect regional hypoxemia by continuously measuring tissue oxygen saturation (rSO₂), automating the differential analysis of regional to central oxygen saturation.

NomoLine^® Capnography and Gas Monitoring. Our gas analyzers, IRMA^™ and ISA^™, are available through Root^™ MOC-9^® modules via OEM integration or through an emergency capnometer (EMMA^®). These analyzers enable our customers to benefit from CO₂, N₂O, O₂ and anesthetic agent monitoring in many hospital environments.

uSpO₂^®Cable/Board. Our SET^®technology-in-a-cable contains our low power (MS-2040) technology in a reduced size, allowing it to be embedded into patient cables as part of the sensor connector.

Sensors

Sensors and Cables. We have developed one of the broadest lines of single-patient-use (disposable), reusable and rainbow^® sensors and cables. In total, we have over 100 different types of sensors designed to meet virtually every clinical need. Masimo SET^® sensors are uniquely designed to reduce interference from physiological and non-physiological noise. Our proprietary technology platforms operate only with our proprietary sensor lines. However, through the use of adapter cables, our sensors can be connected to certain competitor pulse oximetry monitors. We sell our sensors and cables to end-users directly or through our distributors and OEM partners.

Our single-patient-use sensors offer several advantages over reusable sensors, including improved performance, cleanliness, increased comfort and greater reliability. Our reusable sensors are primarily used for short-term, spot-check monitoring.

RD SET^™, RD rainbow SET^™, and RD rainbow Lite SET^®. Our RD family of sensors is designed to maximize patient comfort, optimize clinician workflow and reduce material waste. RD sensors are lightweight with no moving parts and a flat, soft cable with smooth edges. RD sensors are available in fold-over and wrap-around styles for a variety of patient types and clinical scenarios.

SofTouch^™ Sensors. SofTouch^™ sensors are designed with less or no adhesive for patients with compromised skin conditions. SofTouch^™ sensors are available as single-patient sensors for newborns and multi-site reusable sensors for pediatrics and adults.

Trauma and Newborn Sensors. We have developed two specialty sensor lines, for trauma and resuscitation situations, as well as for newborns. These sensors contain an identifier that automatically sets the pulse oximeter to its maximum sensitivity and fastest settings, and allow for quick application, even in wet and slippery environments. Additionally, we introduced low-profile sensors LNCS^® and M-LNCS^®Neo, NeoPt and Inf sensors to monitor oxygen saturation in newborns. These sensors are smaller and thinner, making them significantly more comfortable for patients and easier for clinicians to apply.

Blue^® Sensors. We believe our Blue^® Sensors are the first FDA-cleared sensors to accurately monitor arterial blood oxygen saturation levels in cyanotic infants and children with abnormally low oxygen saturation levels.

E1^® Ear Sensor. We believe that our E1^® Ear Sensor is the first single-patient-use ear sensor that can be placed securely in the ear conchae, allowing clinicians to combine Masimo SET^® performance and central monitoring to provide quick access and responsive assessment of oxygenation. The E1^® Ear Sensor is designed for field emergency medical services utilization.

TFA-1^® Adhesive Forehead Sensor. We designed our TFA-1^® forehead sensor for hospitals desiring forehead monitoring using a disposable sensor. TFA-1^® combines Masimo SET^®performance with quick access and responsive oxygenation assessment, and has received FDA 510(k) clearance.

rainbow^® Sensors. We developed these proprietary, multi-wavelength sensors for use with our rainbow^® Pulse CO-Oximetry products. In contrast to traditional sensors that only have the capability to monitor SpO_2,and PR, our rainbow^® sensors can also monitor SpCO^®, SpMet^® and SpHb^®. Our licensed rainbow SET^™ sensors are the only sensors that are compatible with our licensed rainbow SET^™ products. Rainbow^® sensors are available in single-patient-use, and reusable spot-check sensor types.

The rainbow^® DCI^®-miniis the first noninvasive hemoglobin spot-check sensor for infants and small children (weight 3 to 30 kg). Paired with our handheld Pronto^® or Rad-67^™ devices, the rainbow^® DCI^®-mini sensors are designed to help clinicians quickly and easily spot-check hemoglobin levels in infants and small children, which may facilitate the identification of anemia. When paired with Rad-67^™, the rainbow^® DCI^®-mini enables Next Generation SpHb^® measurements. The rainbow^® DCI^®-mini has received CE Mark in Japan and Europe, but is not currently available for sale in the U.S. The rainbow^® Super DCI^®-minisensor allows for the ability to measure SpHb^®, SpCO^®, SpMet^® and SpO₂ on the same noninvasive reusable sensor. The rainbow^® Super DCI^®-mini has received CE Mark in Japan and Europe, but is not currently available for sale in the U.S.

Table of Contents

rainbow Acoustic^® Sensors. We believe we were the first to market a continuous respiration rate monitoring technology based on an acoustic sensor placed on the patient’s neck. Our rainbow Acoustic^® sensors detect the sounds associated with breathing and convert the sounds into continuous respiration rate using proprietary signal processing that is based on Masimo SET^®. RAS-45, our single-use acoustic respiration sensor for RAM^®, is designed to facilitate placement on and improve attachment to the neck. RAS-45 operates with Masimo MX circuit boards to measure RRa^® and display an acoustic respiration wave form. Like the RAS-125c sensor, RAS-45 operates with Masimo MX technology boards to measure RRa^®, display the acoustic respiration wave form and optionally allow clinicians to listen to the sound of breathing. Both the RAS-45 and RAS-125c are available in CE marked countries and the U.S. for adult and pediatric patients who weigh more than 10 kg. In September 2018, we received FDA 510(k) clearance for the RAS-45 for infant and neonatal patients. With this new clearance, acoustic respiration rate measurement is now available for all patients, including neonates, in the U.S. The RAS-45 for infant and neonatal patients has not received CE mark.

SedLine^® Sensor. Used with the SedLine^® MOC-9^® module for the Root^™ patient monitoring and connectivity platform, the SedLine^® sensor is a disposable sensor that collects EEG data for our SedLine^® monitor. In 2017, we introduced RD SedLine^® sensors, which feature a repositioned, color-coded sensor-cable connection that lies comfortably on the patient’s head and soft foam pads to reduce discomfort upon application to the patient.

O3^®Sensors. Used with the O3^® MOC-9^® module for the Root^™ patient monitor, each O3^® sensor contains four light-emitting diodes and two detectors to continuously measure rSO₂. In May 2017, we announced FDA 510(k) clearance for our pediatric application of O3^® regional oximetry with the O3^®pediatric sensor, making O3^® regional oximetry monitoring available in the U.S. for both adult patients and pediatric patients weighing more than 5 kg (11 lbs) and less than 40 kg (88 lbs).

Reprocessed Sensors. We offer customers the option of using Masimo reprocessed sensors, the only sensor reprocessing solution that maintains new Masimo sensor performance specifications.

Remote Alarm and Monitoring Solutions

Masimo Patient SafetyNet. Patient SafetyNet is a supplemental remote monitoring and clinician notification system that routes bedside-generated alarms through a server to a qualified clinician’s handheld paging device in real-time. Each system can support up to 200 bedside monitors and can either be integrated into a hospital’s existing IT infrastructure or operate as a stand-alone wireless network. In March 2018, we announced Replica^™, an application for smart phones and tablets that works in conjunction with Patient SafetyNet^™. Replica^™ allows clinicians to view continuous monitoring data for multiple patients, as well as view and respond to alarms and alerts, all from their smart phones, regardless of location.

Proprietary Measurements and Features

All of our monitors shipped since January 2006, including Radical-7^® and certain future OEM products, that incorporate the MX circuit board will allow purchases of software for rainbow^® measurements, as well as other future measurements. Our current rainbow^® measurements include SpHb^®, SpCO^®, SpMet^®, SpOC^™ ORi^™, Pi, PR, PVi^®, RPVi^™, RRp^® and SpfO₂^™, as well as rainbow Acoustic Monitoring^®, RRa^®.

Halo Index^™. Currently, clinicians monitor multiple clinical parameters on each patient and interpret each measurement independently. Halo Index^™ is a dynamic indicator that facilitates continuous global trending and assessment of multiple physiological measurements within a single index to quantify changes in patient status that can be displayed on the Patient SafetyNet view stations. Halo Index^™ has received CE Mark, but is not currently available for sale in the U.S. In the future, subject to receipt of regulatory clearance, we expect Halo Index^™ will also be available as part of our standalone devices and OEM boards. As more clinical evidence is collected on Halo Index^™, its clinical utility in a variety of care areas and patient types will become more specific.

Eve^™, our newborn screening software application for our Radical-7^® Pulse CO-Oximeter^®, is designed to help clinicians more effectively and efficiently screen newborns for CCHD. In the Radical-7^® Pulse CO-Oximeter^®, Eve^™ automates the screening steps with animated instruction, including sensor application, measurement selection and screening result determination. Eve^™ is intended to provide consistent application of the screening protocol to reduce method-and operator-induced variability and improve efficiency by automating the data capture and comparison between readings. Eve^™ has received CE Mark, but is currently not available for sale in the U.S.

Table of Contents

X-Cal^®

Sensor and cable failures can prevent pulse oximeters from providing the patient safety advantages that continuous pulse oximetry monitoring is intended to provide. Our X-Cal^® technology enhances patient safety and improves clinician efficiency by preserving system quality, performance and reliability and reducing the chances of bad or inferior sensors and cables being used on patients. X-Cal^® technology enhances the benefits of Masimo’s pulse oximetry by incorporating the means to track the expected monitoring life of our sensors and cables and provides appropriate user messaging on the host monitor.

X-Cal^® addresses three common problems experienced by clinicians using an integrated Masimo system, including:


•	Patient safety may be compromised by using imitation Masimo sensors and cables because they are not produced with comparable components, do not provide proper shielding from ambient interferences, create electrostatic noise caused by motion, do not have our quality and performance controls, and are not tested or warranted to work within a Masimo system;

•

We design our sensors and cables to last well beyond their warranty period and customer feedback indicates our sensors and cables last significantly longer than competing products, but cable and sensor reliability may still be compromised when used beyond their intended life, affecting patient care and causing clinicians and biomedical engineers to spend time troubleshooting intermittent cable and sensor issues; and

•

We believe that third-party reprocessed pulse oximetry sensors introduce challenges in the clinical environment due to potential quality issues. In fact, we believe that most third-party reprocessed sensors do not indicate that they are capable of performing in the same conditions as Masimo Measure-through Motion and Low Perfusion^® sensors or in neonatal applications, key performance requirements available with Masimo SET^® sensors. To the best of our knowledge, no third-party company has attempted to reprocess rainbow SET^™ sensors.

Connectivity

Iris^® connectivity on Root^™ allows third-party devices, such as intravenous pumps and ventilators, to connect to Root^™ enabling display of measurements and notification on the Root^™ monitor, with the ability to document results in the EMR through Masimo Patient SafetyNet.

Iris Gateway^® bridges the gap between device data generated at the patient bedside and documentation in patient data management systems by automatically transferring data from medical devices to EMRs, improving productivity and reducing the likelihood of transcription errors.

Kite^® provides a supplemental display of data from a Masimo device on a compatible smart television and allows clinicians to configure the display differently than that of the connected Masimo device. Kite^® integrates into existing hospital infrastructures where a supplementary display may be beneficial, such as the operating room.

UniView^™ provides a supplemental, integrated display of real-time data and alarms from multiple Masimo and third-party devices. UniView^™ is designed to reduce clinician cognitive overload and promote data sharing among multiple clinicians, helping them to spot trends and coordinate care.

Data Analysis & Reporting

Trace^™ is the first data visualization and reporting software compatible with the full capabilities of the Root^™ patient monitoring and connectivity platform, including Radical-7^® and Radius-7^® Pulse CO-Oximeters^®, Root^™ with integrated noninvasive blood pressure and temperature, and connected MOC-9^® modules such as SedLine^®brain function monitoring, ISA^™ and ISA^™ OR+capnography, and O3^®regional oximetry. Trace^™can create insightful, easy-to-read patient reports that include parameter trends, histograms, event annotations, and key statistics. Trace^™ can communicate with Masimo devices via high-speed wired or wireless connections, with the ability to transfer up to 96 hours of patient data.

Consumer Products

MightySat^®, our fingertip pulse oximeter for personal use provides SpO₂, PR and Pi measurements for health and wellness applications. MightySat^®, which is also available with RRp^® and PVi^®, provides measurements in a compact, battery-powered design with a large color screen that can be rotated for real-time display of the measurements. Bluetooth^® wireless functionality enables measurement display via a free, downloadable Masimo Personal Health application on iOS^® and Android mobile devices, as well as the ability to trend and communicate measurements, including the Apple Health Kit. MightySat^® is available through consumer retailers and directly from Masimo, and is intended for general health and wellness use only. MightySat^® is not intended for medical use.

Table of Contents

iSpO₂^® is a personal use pulse oximeter that combines a fingertip sensor, cable and pulse oximeter in a lightweight, portable device that connects directly to a smart device for displaying measurements. iSpO₂^® uses Measure-through Motion and Low Perfusion^® SET^® technology to measure SpO₂, PR and Pi. The Masimo Personal Health app, available for both iOS^® and Android devices, allows users to track, trend and download their data, as well as share it with the Apple Health app. iSpO₂^® is available through consumer retailers and directly from Masimo and is intended for general health and wellness use only. iSpO₂^® is not intended for medical use.

Cercacor Laboratories, Inc.

Cercacor is an independent entity spun-off from us to our stockholders in 1998. Joe Kiani, our Chairman and Chief Executive Officer, is also the Chairman and Chief Executive Officer of Cercacor. We are a party to a cross-licensing agreement with Cercacor, which was amended and restated effective January 1, 2007 (the Cross-Licensing Agreement), which governs each party’s rights to certain intellectual property held by the two companies.

The following table outlines our rights under the Cross-Licensing Agreement relating to specific end user markets and the related technology applications of specific measurements.



	End User Markets
Measurements	Professional Caregiver and Alternate Care Market	Patient and Pharmacist
Vital Signs⁽¹⁾	Masimo (owns)	Cercacor (non-exclusive license)
Non-Vital Signs⁽²⁾	Masimo (exclusive license)	Cercacor (owns or exclusive license)

______________

⁽¹⁾

Vital Signs measurements include, but are not limited to, SpO₂, peripheral venous oxygen saturation, mixed venous oxygen saturation, fetal oximetry, sudden infant death syndrome, ECG, blood pressure (noninvasive blood pressure, invasive blood pressure and continuous noninvasive blood pressure), temperature, respiration rate, CO₂, pulse rate, cardiac output, EEG, perfusion index, depth of anesthesia, cerebral oximetry, tissue oximetry and/or EMG, and associated features derived from these measurements, such as 3D alarm^®, PVi^® and other features.


⁽²⁾	Non-Vital Signs measurements include the body fluid constituents other than vital signs measurements and include, but are not limited to, carbon monoxide, methemoglobin, blood glucose, hemoglobin and bilirubin.

Our License to Cercacor. We granted Cercacor an exclusive, perpetual and worldwide license, with sublicense rights, to use our Masimo SET^® technology, including all improvements, for the monitoring of non-vital signs measurements and to develop and sell devices incorporating Masimo SET^® for monitoring non-vital signs measurements in the “Cercacor Market”. The Cercacor Market consists of any product market in which a product is intended to be used by a patient or pharmacist rather than a professional medical caregiver regardless of the particular location of the sale, including sales to doctors, hospitals, alternate care market professionals or otherwise, provided the product is intended to be recommended, or resold, for use by the patient or pharmacist. We also granted Cercacor a non-exclusive, perpetual and worldwide license, with sublicense rights, to use Masimo SET^® for the measurement of vital signs in the Cercacor Market. In exchange, Cercacor pays us a 10% royalty on the amount of vital signs sensors and accessories sold by Cercacor.

Cercacor’s License to us. We exclusively license from Cercacor the right to make and distribute products in the “Masimo Market” that utilize rainbow^® technology for the measurement of carbon monoxide, methemoglobin, fractional arterial oxygen saturation, and hemoglobin, which includes hematocrit. The Masimo Market consists of any product market where the product is intended to be used by a professional medical caregiver, including hospital caregivers, surgicenter caregivers, paramedic vehicle caregivers, doctors’ offices caregivers, alternate care facility caregivers and vehicles where alternative care services are provided. We also have the option to obtain exclusive licenses to make and distribute products in the Masimo Market that utilize rainbow^® technology for the monitoring of other non-vital signs measurements, including blood glucose. We have 180 days after proof of feasibility to exercise the above-referenced option to obtain a license for the measurement of blood glucose for an additional $2.5 million and licenses for other non-vital signs measurements for an additional $0.5 million each. The licenses are exclusive until the later of 20 years from the grant of the applicable license or the expiration of the last patent included in the rainbow^® technology related to the applicable measurements. To date, we have developed and commercially released devices that measure carbon monoxide, methemoglobin and hemoglobin using licensed rainbow^® technology. We also make and distribute products that monitor respiration rate via rainbow Acoustic Monitoring^®, which is a Masimo-developed rainbow^® technology and, therefore, is not required to be licensed from Cercacor.

Table of Contents

Our license to use rainbow^® technology for these measurements in these markets is exclusive on the condition that we continue to pay Cercacor royalties on our products incorporating rainbow^® technology, subject to certain minimum aggregate royalty thresholds, and that we use commercially reasonable efforts to develop or market products incorporating the licensed rainbow^® technology. The royalty is up to 10% of the rainbow^® royalty base, which includes handhelds, tabletop and multiparameter devices. Handheld products incorporating rainbow^® technology carry a 10% royalty rate. For other products, only the proportional amount attributable to that portion of our devices used to monitor non-vital signs measurements, rather than to monitor vital signs measurements, and sensors and accessories for measuring only non-vital sign parameters are included in the 10% rainbow^® royalty base. For multiparameter devices, the rainbow^® royalty base includes the percentage of the revenue based on the number of rainbow^®-enabled measurements. For hospital contracts where we place equipment and enter into a sensor contract, we pay a royalty to Cercacor on the total sensor contract revenue based on the ratio of rainbow^®-enabled devices to total devices. During the year ended December 29, 2018 and going forward, we are subject to certain specific annual minimum aggregate royalty payment obligations of $5.0 million per year.

Change in Control. The Cross-Licensing Agreement provides that, upon a change in control:


•	if the surviving or acquiring entity ceases to use “Masimo” as a company name and trademark, all rights to the “Masimo” trademark will be assigned to Cercacor;


•	the option to license technology developed by Cercacor for use in blood glucose monitoring will be deemed automatically exercised and a $2.5 million license fee for this technology will become immediately payable to Cercacor; and


•	the minimum aggregate annual royalties payable to Cercacor for carbon monoxide, methemoglobin, fractional arterial oxygen saturation, hemoglobin and/or glucose will increase to $15.0 million per year until the exclusivity period of the agreement ends, plus up to $2.0 million for each additional measurement with no maximum ceiling for non-vital sign measurements.

For purposes of the Cross-Licensing Agreement, a change in control includes any of the following with respect to us or Cercacor:


•	the sale of all or substantially all of either company’s assets to a non-affiliated third-party;


•	the acquisition by a non-affiliated third-party of 50% or more of the voting power of either company;


•	Joe Kiani, our Chief Executive Officer and the Chief Executive Officer of Cercacor, resigns or is terminated from his position with either company; or


•	the merger or consolidation of either company with a non-affiliated third-party.

Ownership of Improvements. Any improvements to Masimo SET^® or rainbow^® technology made by Cercacor, by us, or jointly by Cercacor with us or with any third-party that relates to non-vital signs monitoring, and any new technology acquired by Cercacor, is and will be owned by Cercacor. Any improvements to the Masimo SET^® platform or rainbow^® technology made by Cercacor, by us, or jointly by Cercacor with us or with any third-party that relates to vital signs monitoring, and any new technology acquired by us, is and will be owned by us. However, for both non-vital signs and vital signs monitoring, any improvements to the technology, excluding acquired technology, will be assigned to the other party and will be subject to the terms of the licenses granted under the Cross-Licensing Agreement. Any new non-vital signs monitoring technology utilizing Masimo SET^® that we develop will be owned by Cercacor and will be subject to the same license and option fees as if it had been developed by Cercacor. Also, we will not be reimbursed by Cercacor for our expenses relating to the development of any such technology.

Other Agreements with Cercacor. We have also entered into various other agreements with Cercacor, including an Administrative Services Agreement, a Consulting Services Agreement and a Sublease Agreement. See Note 3 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information on these agreements and other transactions with Cercacor.

As a result of changes in the capital structure of Cercacor, as well as certain of its contractual relationships with us, we completed a re-evaluation of the authoritative consolidation guidance during the year ended December 31, 2016 and determined that, although Cercacor remains a variable interest entity, we are no longer its primary beneficiary. Based on such determination, we discontinued consolidating Cercacor within our consolidated financial statements effective as of January 3, 2016. See Note 3 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information.

Table of Contents

Government Regulation

As a global medical technology company, we are subject to significant government regulation, compliance requirements, fees and costs, both in the U.S. and abroad. These regulatory requirements subject our products and our business to numerous risks that are specifically discussed within “Risks Related to Our Regulatory Environment” under Part I, Item 1A—“Risk Factors” within this Annual Report on Form 10-K. A summary of certain critical aspects of our regulatory environment is included below.

U.S. Food and Drug Administration (FDA) Premarket Clearance and Approval Requirements

The FDA and other federal, state and local authorities regulate our products and product-related activities. Pursuant to the Federal Food, Drug, and Cosmetic Act (FDCA) and the regulations promulgated under that Act, the FDA regulates the design, development, clinical trials, testing, manufacture, packaging, labeling, storage, distribution and promotion of medical devices. We endeavor to ensure that our products and procedures remain in compliance with all applicable FDA regulations, but the regulations regarding the manufacture and sale of our products are subject to change. We cannot predict the effect, if any, that these changes might have on our business, financial condition and results of operations. Unless an exemption applies, each medical device that we wish to market in the U.S. must first receive from the FDA either clearance of a 510(k) premarket notification, or approval of a premarket application (PMA). Alternatively, the device may be cleared by the FDA through the de novo classification process.

The FDA’s 510(k) clearance process usually takes from four to nine months, but it can take longer. The process of obtaining PMA approval or de novo classification is much more costly, lengthy and uncertain than the process of obtaining 510(k) clearance. We cannot be sure that 510(k) clearance, PMA approval or de novo classification will be obtained for any product we propose to market on a timely basis or at all. In addition, if the FDA discovers that an applicant has submitted false or misleading information, the FDA may refuse to review submissions until certain requirements are met pursuant to its Application Integrity Policy.

Although an applicant may initially choose whether to submit a 510(k) notification for clearance, a PMA for approval or a de novo classification request, the FDA decides which pathway is appropriate based upon the classification of the device. Class I devices are those for which safety and effectiveness can be reasonably assured by adherence to the FDA’s general regulatory controls (General Controls) for medical devices, which include compliance with the applicable portions of the FDA’s Quality System Regulation (QSR), facility registration and product listing, reporting of adverse medical events and malfunctions, reporting of corrections and removals, and appropriate, truthful and non-misleading labeling, advertising and promotional materials. Only specified Class I devices, including devices with software, are subject to the design controls requirements of the QSR; other Class I devices are exempt from design control requirements. Some Class I devices are also exempt from many of the good manufacturing practice requirements of the QSR by regulation. While most Class I devices are exempt from the 510(k) premarket notification process, some Class I devices also require 510(k) clearance by the FDA.

Class II devices are subject to the FDA’s General Controls, including the Design Control requirements of the QSR, and other special controls deemed necessary by the FDA to provide reasonable assurance of the safety and effectiveness of the device. Premarket review and clearance by the FDA for Class II devices is accomplished through the 510(k) premarket notification procedure, although some Class II devices are exempt from the premarket notification requirement. The majority of our current regulated devices are classified as Class II devices, while only a few are classified as Class I devices.

To obtain 510(k) clearance, a company must submit a premarket notification demonstrating substantial equivalence between the proposed device and a legally marketed “predicate” device. A “predicate device” is a legally marketed device that (i) was legally marketed prior to May 28, 1976, for which the FDA has not yet called for submission of a PMA application; (ii) has been reclassified by the FDA from Class III to Class II or Class I; (iii) has been cleared through the 510(k) premarket notification process; or (iv) previously has been determined to be exempt from the 510(k) process. The proposed device is substantially equivalent to the predicate device if the proposed device has the same intended use and the same technological characteristics as the predicate device, or, if the proposed device has different technological characteristics, the proposed device is as safe and effective as the predicate device and does not raise different questions of safety and effectiveness. After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, requires a new 510(k) clearance or, if the modified device is not substantially equivalent to the unmodified device, could require a PMA approval or de novo classification. The FDA requires each manufacturer to make this determination in the first instance, but the FDA can review this decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance, PMA approval or de novo classification, the agency may retroactively require the manufacturer to seek 510(k) clearance, PMA approval or de novo classification. The FDA can also require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance, PMA approval or de novo classification is obtained.

Table of Contents

Class III devices are those deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices, or those devices deemed not substantially equivalent to a legally marketed predicate device. Due to the risk level associated with Class III devices, the FDA has determined that general and special controls alone are insufficient to assure the safety and effectiveness of the device. These Class III devices must be approved through the PMA approval process during which the manufacturer must provide reasonable assurance of safety and effectiveness for the intended use(s) of the device to the FDA’s satisfaction. A PMA application must be supported by valid scientific evidence, including extensive preclinical (including bench tests and laboratory and animal studies) and clinical studies as well as information about the device and its components regarding, among other things, device design, manufacturing and labeling. Also during the review period, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. As part of the PMA application review, the FDA will conduct a preapproval inspection of the manufacturing facility to ensure compliance with the FDA’s QSRs. If the FDA approves the PMA, it may place restrictions on the device or the labeling or require additional clinical studies, monitoring or other post-market requirements. If the FDA’s evaluation of the PMA application or the manufacturing facility is not favorable, the FDA may deny approval of the PMA application or issue a “not approvable” letter. The FDA may also require additional clinical trials, which can delay the PMA approval process by several years or otherwise make obtaining PMA approval infeasible. None of our products are currently approved under a PMA.

A clinical trial may be required in support of a 510(k) submission and generally is required for a PMA application or de novo classification request. Clinical trials involving a “significant risk” device require FDA approval of an Investigational Device Exemption (IDE) application, unless the proposed study is deemed to be exempt from the IDE requirements. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, protocols for the proposed clinical trials and other information demonstrating that the device is appropriate for use with humans in a clinical study. Clinical trials may begin if the IDE application is approved by the FDA and the appropriate institutional review boards (IRBs) at the clinical trial sites. Submission of an IDE application does not give assurance that the FDA will issue the IDE. If the IDE application is approved, there can be no assurance the FDA will determine that the data derived from the trials support the safety and effectiveness of the device or warrant the continuation of clinical trials. An IDE supplement must be submitted to and approved by the FDA before a sponsor or investigator may make a change to the investigational plan that may affect its scientific soundness, study indication or the rights, safety or welfare of human subjects. If the study meets the requirements for a non-significant risk study, it may be eligible for compliance with “abbreviated” IDE requirements, which include a subset of the requirements applicable to significant risk medical devices studies. Sponsors of non-significant risk studies must obtain IRB approval but are not required to obtain FDA approval of an IDE application. Sponsors of both significant risk and non-significant risk trials must comply with the FDA’s regulations, including the requirement that informed consent be obtained from each subject, and with clinical trial reporting regulations that require submission of information about certain clinical trials to a public database maintained by the National Institutes of Health. Even if a trial is completed, the results of clinical testing may not adequately demonstrate the safety and efficacy of the device or may otherwise not be sufficient to obtain FDA clearance, approval or classification of the device.

We believe that our OEM partners may be required to obtain 510(k) clearance from the FDA for certain of their products that incorporate Masimo SET^® technology, Masimo rainbow SET^™ technology, Masimo Board-in-Cable technology or Masimo sensors. In order to facilitate receipt of 510(k) clearance by our OEM partners for their products that incorporate Masimo SET^® or Masimo rainbow SET^™ boards and sensors, we grant our OEM partners a right to cross-reference the 510(k) submission files from our cleared Masimo SET^® circuit boards, sensors, cables and notification systems.

We market our iSpO2^® pulse oximeter and MightySat^® fingertip pulse oximeter for general health and wellness use. We are marketing these products in accordance with the FDA’s current policy and enforcement discretion which indicates that pulse oximeters that are not intended for medical purposes can be marketed directly to consumers without first obtaining 510(k) clearance. We cannot assure you that the FDA will not change its policy regarding the regulation of these products. If the FDA changes its policy, we may be required to seek 510(k) clearance to market these pulse oximeters. We also may be required to cease marketing and/or recall the products until we obtain new 510(k) clearances.

The regulatory regime is subject to change by Congress or the FDA. For example, in December 2016, Congress enacted the 21st Century Cures Act (Cures Act), which contained several provisions related to the review and approval of new medical technologies. Along with other changes, the Cures Act established a statutory program for “breakthrough” devices, defined as devices intended to treat or diagnose a life-threatening or irreversibly debilitating disease that represents a breakthrough technology, devices that have no approved/cleared alternatives, devices that offer significant advantages over approved/cleared alternatives, or devices where the availability of such device is in the best interest of patients. The FDA will apply additional resources to help speed the approval or clearance of devices that are designated as breakthrough devices. The Cures Act also included provisions related to the “least burdensome” principle and expanded the number of patients that could be treated using a device approved under a Humanitarian Device Exemption, among other provisions. Furthermore, in August 2017, Congress enacted the FDA Reauthorization Act of 2017 (FDARA).

Table of Contents

Although FDARA principally reauthorized the FDA user fee programs, it also included, among other things, provisions that establish processes for the initial classification and reclassification of accessory devices, i.e., devices used with a parent device.

User Fees

Unless a specific exemption or waiver applies, 510(k) submissions, de novo classification requests, and PMA applications are subject to user fees. The PMA and de novo classification user fees are significantly higher than the user fees for 510(k) notifications. The FDA was reauthorized to assess medical device user fees through fiscal year 2022 pursuant to FDARA.

Pervasive and Continuing FDA Regulation

After a device is placed on the market, it continues to be subject to the FDA’s regulatory authority. The FDA regulatory requirements include:


•	product listing and establishment registration, which helps facilitate FDA inspections and other regulatory action;


•	unique device identification (UDI) registration, which identifies medical devices through their distribution and use;

•

QSRs and current good manufacturing practices (GMPs), which require manufacturers, including third-party manufacturers, to follow stringent design control, testing, change control, documentation and other quality assurance procedures during all aspects of the development and manufacturing process, including requirements for packaging, labeling and record keeping, complaint handling, corrective and preventive actions and internal auditing;


•	labeling control and advertising regulations, including FDA prohibitions against the promotion of products for uncleared, unapproved or off-label uses or indications;


•	for 510(k)-cleared devices, clearance of product modifications that could significantly affect safety or efficacy or that would constitute a major change or modification in intended use of one of our cleared devices;


•	for any future PMA approved products, approval of product modifications that affect the safety or effectiveness of the device;


•	medical device reporting regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury, or if their device has malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction of the device or a similar device were to recur;


•	for any future PMA approved products, post-approval restrictions or conditions, including post-approval study commitments;


•	post-market surveillance requirements, which apply when necessary to protect the public health or to provide additional safety and effectiveness data for the device;


•	the FDA’s recall authority, whereby it can ask, or under certain conditions order, device manufacturers to recall from the market a product that is in violation of its conditions of approval, governing laws and/or regulations;


•	regulations pertaining to voluntary recalls; and


•	notices of corrections or removals.

We must register with the FDA as a medical device manufacturer, list all products placed in commercial distribution and obtain all necessary state permits, licenses or other authorizations to operate our business. As a manufacturer, we are subject to announced and unannounced inspections by the FDA to determine our compliance with the FDA’s QSR and other regulations. Our OEM partners also are subject to inspection and market surveillance by the FDA to determine compliance with regulatory requirements.

If the FDA finds that we or one of our OEM partners have failed to comply with the FDA’s QSR, the agency can institute a wide variety of enforcement and other regulatory actions, including:


•	an FDA Form 483, which is issued by the FDA at the conclusion of an inspection when an investigator has observed any conditions that may constitute potential violations of the FDCA and related Acts;


•	a public warning letter that notifies a company of potential violations of the FDCA;


•	fines and monetary civil penalties against us and/or OEM partners;


•	delays in clearing or approving, or refusal to clear or approve, our products;


•	withdrawal or suspension of clearances and/or approvals of our products or those of our third-party suppliers by the FDA or other regulatory bodies;


•	product recall;

Table of Contents


•	product detention or seizure;


•	interruption of production;


•	refusal to provide Certificates to Foreign Governments (CFGs), which may be necessary to permit the export of devices from the U.S. to other countries;


•	operating restrictions;


•	injunctions (including those agreed to in a consent decree); and


•	criminal prosecution.

The FDA also has the authority to require repair, replacement or refund of the cost of any medical device manufactured or distributed by us.

Advertising and Promotion

Advertising and promotion of medical devices, in addition to being regulated by the FDA, are also regulated by the Federal Trade Commission (FTC) and by federal and state regulatory and enforcement authorities, including the Department of Justice, the Office of Inspector General of the Department of Health and Human Services, and various state attorneys general. Although physicians are permitted to use their medical judgment to use medical devices for indications other than those cleared or approved by the FDA, we may not promote our products for such “off-label” uses and can only market our products for cleared or approved uses.

Other companies’ promotional activities for their FDA-regulated products have been the subject of FTC enforcement actions brought under healthcare reimbursement laws and consumer protection statutes. FTC enforcement actions often result in consent decrees that constrain future actions. In addition, under the federal Lanham Act and similar state laws, competitors and others can initiate litigation relating to advertising claims.

Import and Export Requirements

To import a device, the importer must file an entry notice and bond with the United States Bureau of Customs and Border Protection (CBP). All devices are subject to FDA examination before release from CBP. Any article that appears to be in violation of the FDCA may be refused admission and a notice of detention and hearing may be issued. If the FDA ultimately refuses admission, the CBP may issue a notice for redelivery and, if a company fails to redeliver the goods or otherwise satisfy CBP and the FDA with respect to their disposition, may assess liquidated damages for up to three times the value of the lot. The CBP also imposes its own regulatory requirements on the import of our products, including inspection and possible sanctions for noncompliance.

Products exported from the United States are subject to foreign countries’ import requirements and the exporting requirements of the FDA or European regulating bodies, as applicable. In particular, international sales of medical devices manufactured in the United States that are not approved or cleared by the FDA for use in the United States, or are banned or deviate from lawful performance standards, are subject to FDA export requirements.

Foreign countries often require, among other things, a CFG for export. To obtain a CFG, the device manufacturer must apply to the FDA. The FDA certifies that the product has been granted clearance or approval in the United States and that the manufacturing facilities were in compliance with the FDA’s QSR regulations at the time of the last FDA inspection.

Foreign Regulation Regarding Clearance and Approval

Many foreign countries in which we market or may market our products have regulatory bodies and restrictions similar to those of the FDA. International sales are subject to foreign government regulation, the requirements of which vary substantially from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA clearance and the requirements may differ.

In particular, marketing of medical devices in the European Union (EU) is subject to compliance with the Medical Devices Directive 93/92/EEC (MDD). A medical device may be placed on the market within the EU only if it conforms to certain “essential requirements” and bears the CE Mark. The most fundamental and essential requirement is that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients, or the safety and health of users and others. In addition, the device must achieve the essential performance(s) intended by the manufacturer and be designed, manufactured and packaged in a suitable manner.

Table of Contents

Manufacturers must demonstrate that their devices conform to the relevant essential requirements through a conformity assessment procedure. The nature of the assessment depends upon the classification of the device. The classification rules are mainly based on three criteria: the length of time the device is in contact with the body, the degree of invasiveness and the extent to which the device affects the anatomy. Conformity assessment procedures for all but the lowest risk classification of device involve a notified body. Notified bodies are often private entities and are authorized or licensed to perform such assessments by government authorities. Manufacturers usually have some flexibility to select a notified body for the conformity assessment procedures for a particular class of device and to reflect their circumstances, e.g., the likelihood that the manufacturer will make frequent modifications to its products. Conformity assessment procedures require an assessment of available clinical evidence, literature data for the product and post-market experience in respect of similar products already marketed. Notified bodies also may review the manufacturer’s quality systems. If satisfied that the product conforms to the relevant essential requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity and application of the CE Mark. Application of the CE Mark allows the general commercializing of a product in the EU. The product can also be subjected to local registration requirements depending on the country. We maintain CE Marking on all of our products that require such markings as well as local registrations as required.

In May 2017, the EU adopted a new Medical Devices Regulation (EU) 2017/745 (MDR), which will repeal and replace the MDD with effect from May 26, 2020. The MDR clearly envisages, among other things, stricter controls of medical devices, including strengthening of the conformity assessment procedures, increased expectations with respect to clinical data for devices and pre-market regulatory review of high-risk devices. The MDR also envisages greater control over notified bodies and their standards, increased transparency, more robust device vigilance requirements and clarification of the rules for clinical investigations. Under transitional provisions, medical devices with notified body certificates issued under the MDD prior to May 26, 2020 may continue to be placed on the market for the remaining validity of the certificate, until May 27, 2024 at the latest. After the expiry of any applicable transitional period, only devices that have been CE marked under the MDR may be placed on the market in the EU.

Medical Device Tax

The Affordable Care Act (ACA) also imposed a significant new tax on medical device makers in the form of a 2.3% excise tax on U.S. medical device sales, with certain exemptions (MDET). For the year ended January 2, 2016, we recorded $6.9 million in medical device taxes that were included in selling, general and administrative expenses. The MDET is currently suspended through December 31, 2019. The tax may be reimposed on medical device makers beginning on January 1, 2020 if the suspension is not re-extended or the medical device tax is not permanently repealed.

Conflict Minerals and Supply Chain

We are subject to certain SEC rules adopted pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act concerning “conflict minerals” (generally tin, tantalum, tungsten and gold) and similar rules are under consideration by the EU. Certain of these conflict minerals are used in the manufacture of our products. Although the rules are being challenged in court, in their present form they require us to investigate the source of any conflict minerals necessary to the production or functionality of our products. If any such conflict minerals originated in the Democratic Republic of the Congo or adjoining countries (the DRC region), we must undertake comprehensive due diligence to determine whether such minerals financed or benefited armed groups in the DRC region. Since our supply chain is complex, our ongoing compliance with these rules could affect the pricing, sourcing and availability of conflict minerals used in the manufacture of our products.

We are also subject to disclosure requirements regarding abusive labor practices in portions of our supply chain under the California Transparency in Supply Chains Act.

Environmental

Our manufacturing processes involve the use, generation and disposal of solid wastes, hazardous materials and hazardous wastes, including silicone adhesives, solder and solder paste, sealants, epoxies and various solvents such as methyl ethyl ketone, acetone and isopropyl alcohol. As such, we are subject to stringent federal, state and local laws relating to the protection of the environment, including those governing the use, handling and disposal of hazardous materials and wastes. Products that we sell in Europe are subject to regulation in EU markets under the Restriction of Hazardous Substances Directive (RoHS). RoHS prohibits companies from selling products which contain certain hazardous materials, including lead, mercury, cadmium, chromium, polybrominated biphenyls and polybrominated diphenyl ethers, in EU member states. In addition, the EU’s Regulation-Registration, Evaluation, Authorization, and Restriction of Chemicals Directive also restricts substances of very high concern in products.

Table of Contents

Future environmental laws may require us to alter our manufacturing processes, thereby increasing our manufacturing costs. We believe that our products and manufacturing processes at our facilities comply in all material respects with applicable environmental laws and worker health and safety laws; however, the risk of environmental liabilities cannot be completely eliminated.

Health Care Fraud and Abuse

In the U.S., there are federal and state anti-kickback laws that generally prohibit the payment or receipt of kickbacks, bribes or other remuneration in exchange for the referral of patients or other health-related business. For example, the Federal Anti-Kickback Statute (42 U.S.C. § 1320a-7b(b)) prohibits anyone from, among other things, knowingly and willfully offering, paying, soliciting or receiving any bribe, kickback or other remuneration intended to induce the referral of patients for, or the purchase, order or recommendation of, health care products and services reimbursed by a federal health care program, including Medicare and Medicaid. Recognizing that the federal anti-kickback law is broad and potentially applicable to many commonplace arrangements, Congress and the Office of Inspector General (OIG) within the Department of Health and Human Services have created statutory “exceptions” and regulatory “safe harbors”. Exceptions and safe harbors exist for a number of arrangements relevant to our business, including, among other things, payments to bona fide employees, certain discount and rebate arrangements, and certain payment arrangements involving Group Purchasing Organizations (GPOs). Although an arrangement that fits into one or more of these exceptions or safe harbors is immune from prosecution, arrangements that do not fit squarely within an exception or safe harbor do not necessarily violate the law, but the OIG or other government enforcement authorities may examine the practice to determine whether it involves the sorts of abuses that the statute was designed to combat. Violations of this federal law can result in significant penalties, including imprisonment, monetary fines and assessments, and exclusion from Medicare, Medicaid and other federal health care programs. Exclusion of a manufacturer, like us, would preclude any federal health care program from paying for its products. In addition to the federal anti-kickback law, many states have their own laws that are analogous to the federal anti-kickback law, but may apply regardless of whether any federal or state health care program business is involved. Federal and state anti-kickback laws may affect our sales, marketing and promotional activities, educational programs, pricing and discount practices and policies, and relationships with health care providers by limiting the kinds of arrangements we may have with hospitals, alternate care market providers, GPOs, physicians, payers and others in a position to purchase or recommend our products.

Federal and state false claims laws prohibit anyone from presenting, or causing to be presented, claims for payment to third-party payers that are false or fraudulent. For example, the Federal Civil False Claims Act (31 U.S.C. § 3729 et seq.) imposes liability on any person or entity who, among other things, knowingly and willfully presents, or causes to be presented, a false or fraudulent claim for payment by a federal health care program, including Medicaid and Medicare. Some suits filed under the False Claims Act, known as “qui tam” actions, can be brought by a “whistleblower” or “relator” on behalf of the government and such individuals may share in any amounts paid by the entity to the government in fines or settlement. Manufacturers, like us, can be held liable under false claims laws, even if they do not submit claims to the government, where they are found to have caused submission of false claims by, among other things, providing incorrect coding or billing advice about their products to customers that file claims, or by engaging in kickback arrangements or off-label promotion with customers that file claims. A number of states also have false claims laws, and some of these laws may apply to claims for items or services reimbursed under Medicaid and/or commercial insurance. Sanctions under these federal and state fraud and abuse laws may include civil monetary penalties and criminal fines, exclusion from government health care programs and imprisonment.

The Health Insurance Portability and Accountability Act of 1996 (HIPAA) created new federal crimes, including health care fraud and false statements related to health care matters. The health care fraud statute prohibits, among other things, knowingly and willfully executing a scheme to defraud any health care benefit program, including those offered by private payers. The false statements statute prohibits, among other things, knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for health care benefits, items or services. A violation of either statute is a felony and may result in fines, imprisonment and other significant penalties.

The Physician Payment Sunshine Act (Sunshine Act), which was enacted by Congress as part of the ACA, requires medical device companies to track and publicly report, with limited exceptions, all payments and transfers of value to physicians and teaching hospitals in the U.S. Companies are required to track payments made and to report such payments to the government by March 31 of each year. Several states have similar requirements.

The Foreign Corrupt Practices Act of 1977 and similar worldwide anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business.

Table of Contents

Due to the breadth of some of these laws, it is possible that some of our current or future practices might be challenged under one or more of these laws. In addition, there can be no assurance that we would not be required to alter one or more of our practices to be in compliance with these laws. Evolving interpretations of current laws or the adoption of new federal or state laws or regulations could adversely affect many of the arrangements we have with customers and physicians. Therefore, our risk of being found in violation of these laws is increased by the fact that some of these laws are broad and open to interpretation.

Privacy and Security of Health and Other Personal Information

Numerous federal, state and international laws and regulations, including HIPAA and General Data Protection Regulation (GDPR), govern the collection, use and disclosure of patient-identifiable, protected health information (PHI) and other personal information. In the U.S., HIPAA applies to covered entities, which include most healthcare facilities that purchase and use our products, and their business associates. The HIPAA Privacy Rule restricts the use and disclosure of PHI, and requires covered entities and their business associates to safeguard that information and to provide certain rights to individuals with respect to that information. The HIPAA Security Rule establishes detailed requirements for safeguarding PHI transmitted or stored electronically. Although we are not a covered entity, we are sometimes deemed to be a business associate of covered entities due to activities that we perform for or on behalf of covered entities, such as training customers on the use of our products or investigating product performance. As business associates, we are subject to many of the requirements of HIPAA and could be directly subject to HIPAA civil and criminal enforcement and the associated penalties for violation of the Privacy, Security and Breach Notification Rules.

The HIPAA standards also apply to the use and disclosure of PHI for research and generally require the covered entity performing the research to obtain the written authorization of the research subject (or an appropriate waiver) before providing that subject’s PHI to sponsors like us for purposes related to the research. These covered entities also typically impose contractual limitations on our use and disclosure of the PHI they disclose to us. We may be required to make costly system modifications to comply with the privacy and security requirements that will be imposed on us and our failure to comply may result in liability and adversely affect our business.

Numerous other federal and state laws protect the confidentiality of PHI, including state medical privacy laws and federal and state consumer protection laws. These various laws in many cases are not preempted by the HIPAA rules and may be subject to varying interpretations by the courts and government agencies, creating complex compliance issues for us and our customers and potentially exposing us to additional expense, adverse publicity and liability. Other countries also have, or are developing, laws governing the collection, use and transmission of health information, and these laws could create liability for us or increase our cost of doing business.

Third-Party Reimbursement

Health care providers, including hospitals, that purchase our products generally rely on third-party payers, including the Medicare and Medicaid programs and private payers, including indemnity insurers and managed care plans, to cover and reimburse all or part of the cost of the products and the procedures in which they are used. As a result, demand for our products is dependent in part on the coverage and reimbursement policies of these payers. No uniform coverage or reimbursement policy for medical technology exists among all third-party payers, and coverage and reimbursement can differ significantly from payer to payer.

The Centers for Medicare & Medicaid Services (CMS) is the federal agency responsible for administering the Medicare program. Along with its contractors, CMS establishes the coverage and reimbursement policies for the Medicare program. Because a large percentage of our products are used in the treatment of elderly or disabled individuals who are Medicare beneficiaries, Medicare’s coverage and reimbursement policies are particularly significant to our business. In addition, private payers often follow the coverage and reimbursement policies of Medicare.

In general, Medicare will cover a medical product or procedure when the product or procedure is reasonable and necessary for the diagnosis or treatment of an illness or injury, or to improve the functioning of a malformed body part. Even if the medical product or procedure is considered medically necessary and coverage is available, Medicare may place restrictions on the circumstances where it provides coverage. For example, several Medicare local contractors have issued policies that restrict coverage for pulse oximetry in hospital inpatient and outpatient settings to a limited number of conditions, including limiting coverage to patients who (i) exhibit signs of acute respiratory dysfunction, (ii) have chronic lung disease, severe cardiopulmonary disease or neuromuscular disease involving the muscles of respiration, (iii) are under treatment with a medication with known pulmonary toxicity, or (iv) have sustained multiple trauma or complaints of acute chest pain.

Table of Contents

Reimbursement for our products may vary not only by the type of payer involved but also based upon the setting in which the product is furnished and utilized. For example, Medicare payment may be made, in appropriate cases, for patient stays in the hospital inpatient and outpatient settings involving the use of our products. Medicare generally reimburses hospitals based upon prospectively determined amounts. For hospital inpatient stays, the prospective payment generally is determined by the patient’s condition and other patient data and procedures performed during the inpatient stay, using a classification system known as Medicare Severity Diagnosis-Related Groups (MS-DRGs). Prospective rates are adjusted for, among other things, regional differences, co-morbidity and complications. Hospitals generally do not receive separate Medicare reimbursement for the specific costs of purchasing our products for use in the inpatient setting. Rather, Medicare reimbursement for these costs is deemed to be included within the prospective payments made to hospitals for the inpatient services in which the products are utilized.

In contrast, some differences may be seen in the reimbursement for use of our products in hospital outpatient departments. In this setting, Medicare payments also are generally made under a prospective payment system based on the ambulatory payment classifications (APCs) under which individual items and procedures are categorized. Hospitals receive the applicable APC payment rate for the procedure regardless of the actual cost for such treatment. Some outpatient services such as oximetry services do not receive separate reimbursement. Rather, their reimbursement is deemed packaged into the APC for an associated procedure and the payment for that APC does not vary whether or not the packaged procedure is performed. Some procedures also are paid through composite APCs, which are APCs that establish a payment rate that applies when a specific combination of services is provided. Reimbursement for certain pulse oximetry monitoring services, including those using our products, may be separately payable when they are the only service provided to the patient on that day, packaged if provided with certain critical care services, or reimbursed through a composite APC when provided in connection with certain other services.

Because payments through the Prospective Payment System in both the hospital inpatient and outpatient settings are based on predetermined rates and may be less than a hospital’s actual costs in furnishing care, hospitals have incentives to lower their operating costs by utilizing products that will reduce the length of inpatient stays, decrease labor or otherwise lower their costs. If hospitals cannot obtain adequate coverage and reimbursement for our products, or the procedures in which they are used, we cannot be certain that they will purchase our products, despite the clinical benefits and opportunity for cost savings that we believe can be derived from their use.

Our success with rainbow SET^™ technologies in U.S. settings of care with reimbursable monitoring procedures, such as hospital emergency departments, hospital procedure labs, and the physician office may largely depend on the ability of providers to receive reimbursement for such procedures. While private insurance payers often follow Medicare coverage and payment, we cannot be certain of this and, in many cases, cannot control the coverage or payment rates that private insurance payers put in place. In addition, the potential amendment, repeal or judicial invalidation of the ACA, and/or the enactment of other legislation or regulations, could affect future payment for services involving the use of our products.

Our success in non-U.S. markets depends largely upon the availability of coverage and reimbursement from the third-party payers through which health care providers are paid in those markets. Health care payment systems in non-U.S. markets vary significantly by country, and include single-payer government managed systems, as well as systems in which private payers and government managed systems exist side-by-side. Our ability to achieve market acceptance or significant sales volume in international markets we enter will be dependent in large part on the availability of reimbursement for procedures performed using our products under health care payment systems in such markets.

Other U.S. and Foreign Regulation

We and our OEM partners also must comply with numerous federal, state and local laws, as well as laws in other jurisdictions, relating to matters such as safe working conditions, manufacturing practices, environmental protection, fire hazard control and hazardous substance disposal. We cannot be sure that we will not be required to incur significant costs to comply with these laws and regulations in the future or that these laws or regulations will not hurt our business, financial condition and results of operations. Unanticipated changes in existing regulatory requirements or adoption of new requirements could hurt our business, financial condition and results of operations.

Competition

The medical device industry is highly competitive and many of our competitors have substantially greater financial, technical, marketing and other resources than we do. While we regard any company that sells pulse oximeters as a potential customer, we also recognize that the companies selling pulse oximeters on an OEM basis and/or pulse oximetry sensors are also potential competitors. Our primary competitor, Medtronic plc (Medtronic, formerly Covidien Ltd.), currently holds a substantial share of the pulse oximetry market.

Table of Contents

Medtronic sells its own brand of Nellcor pulse oximeters to end-users, sells pulse oximetry modules to other monitoring companies on an OEM basis, and licenses to certain OEMs the right to make their pulse oximetry platforms compatible with their sensors. We also face substantial competition from larger medical device companies, including companies that develop products that compete with our proprietary Masimo SET^®and our OEM partners. We believe that a number of companies have announced products that claim to offer motion-tolerant accuracy. Pursuant to the terms of the Third Amendment to Settlement Agreement and Release of Claims effective September 2016, Medtronic discontinued paying royalties to us for its sales after October 6, 2018. In addition, some of our patents have expired and other will expire over time in accordance with the laws of the jurisdiction in which they were issued.

We believe that the principal competitive factors in the market for pulse oximetry products include:


•	accurate monitoring during both patient motion and low perfusion;


•	ability to introduce other clinically beneficial measurements related to oxygenation and respiration, such as noninvasive and continuous oxygen reserve index and hemoglobin;


•	competitive pricing, including bundling practices;


•	brand recognition and perception of innovation abilities;


•	sales and marketing capability;


•	access to hospitals which are members of GPOs;


•	access to integrated delivery networks;


•	access to OEM partners; and


•	patent protection.

Sales and Marketing

We have sales and marketing employees in the U.S. and abroad. We expect to moderately increase our worldwide sales and sales support organizations as we continue to expand our presence throughout both the U.S. and the world, including Europe, the Middle East, Asia, Latin America, Canada and Australia. We currently sell all of our medical products both directly to hospitals and the alternate care market via our sales force and certain distributors. We sell our non-medical/consumer products through e-commerce Internet sites such as www.masimopersonalhealth.com and www.amazon.com.

The primary focus of our sales representatives is to facilitate the conversion of competitor accounts to our Masimo SET^® pulse oximetry and rainbow SET^™ Pulse CO-Oximetry^® products, to expand the use of Masimo SET^® and Patient SafetyNet on the general floor and to create and expand the use of rainbow^® measurements in both critical care and non-critical care areas. In addition to sales representatives, we employ clinical specialists to work with our sales representatives to educate end-users on the benefits of Masimo SET^® and assist with the introduction and implementation of our technology and products to their sites. Our sales and marketing strategy for pulse oximetry has been and will continue to be focused on building end-user awareness of the clinical and cost-saving benefits of our Masimo SET^® platform. More recently, we have expanded this communication and educational role to include our Masimo rainbow^® Pulse CO-Oximetry and rainbow Acoustic Monitoring^® products, including hemoglobin, carboxyhemoglobin, methemoglobin, PVi^®, acoustic respiration rate and Halo Index^™.

For the year ended December 29, 2018, two just-in-time distributors, Owens & Minor and Cardinal Health, represented approximately 10.0% and 12.5%, respectively, of our total revenue. These were the only two customers that represented 10% or more of our revenue for the year ended December 29, 2018. Importantly, these two distributors take and fulfill orders from our direct customers, many of which have signed long-term sensor purchase agreements with us. As a result, in the event a specific just-in-time distributor is unable to fulfill these orders, the orders would be redirected to other distributors or fulfilled directly by us.

Additionally, we sell certain of our products through our OEM partners who both incorporate our boards into their monitors and resell our sensors to their customers’ installed base of Masimo SET^® products. Our OEM agreements allow us to expand the availability of Masimo SET^® through the sales and distribution channels of each OEM partner. To facilitate clinician awareness of Masimo SET^® installations, all of our OEM partners have agreed to place the Masimo SET^® logo prominently on their instruments.

In order to facilitate our U.S. direct sales to hospitals, we have signed contracts with what we believe to be the five largest national GPOs in the U.S., based on the total volume of negotiated purchases. In return for the GPOs putting our products on contract, we have agreed to pay the GPOs a percentage of our revenue from their member hospitals. In 2018 and 2017, revenue from the sale of our pulse oximetry products to hospitals that are associated with GPOs amounted to $470.5 million and $417.0 million, respectively.

Table of Contents

Our marketing efforts are designed to build end-user awareness through digital and print advertising, direct mail and trade shows. In addition, we distribute published clinical studies, provide product education for doctors, nurses, biomedical engineers and respiratory therapists and assist with product evaluations.

Intellectual Property

We believe that in order to maintain a competitive advantage in the marketplace, we must develop and maintain protection of the proprietary aspects of our technology. We rely on a combination of patent, trademark, trade secret, copyright and other intellectual property rights and measures to protect our intellectual property.

We have developed a patent portfolio internally, and, to a lesser extent, through acquisitions and licensing, that covers many aspects of our product offerings. As of December 29, 2018, we had 644 issued patents and 353 pending applications in the U.S., Europe, Japan, Australia, Canada and other countries throughout the world. Our patents expire in accordance with the laws of the particular jurisdiction in which they were issued, which sometimes change. Additionally, as of December 29, 2018, we owned 81 U.S. registered trademarks and 248 foreign registered trademarks, as well as trade names that we use in conjunction with the sale of our products. Our trademarks are perpetually renewable.

Under the Cross-Licensing Agreement, we and Cercacor have agreed to allocate proprietary ownership of technology developed based on the functionality of the technology. We will have proprietary ownership, including ownership of all patents, copyrights and trade secrets, of all technology related to the noninvasive monitoring of vital signs measurements, and Cercacor will have proprietary ownership of all technology related to the noninvasive monitoring of non-vital signs measurements. We also rely upon trade secrets, continuing technological innovations and licensing opportunities to develop and maintain our competitive position. We seek to protect our trade secrets and proprietary know-how, in part, with confidentiality agreements with consultants, vendors and employees, although we cannot be certain that the agreements will not be breached or that we will have adequate remedies for any breach.

There are risks related to our intellectual property rights. For further detail on these risks, see “Risks Related to Our Intellectual Property” under Item 1A—“Risk Factors” in this Annual Report on Form 10-K.

Research and Product Development

We believe that ongoing research and development efforts are essential to our success. Our research and development efforts focus primarily on continuing to enhance our technical expertise in pulse oximetry, expanding our noninvasive monitoring of other measurements and developing remote alarm and monitoring solutions.

Although we and Cercacor each have separate research and development projects, we collaborate with Cercacor on multiple research and development activities related to rainbow^® technology and other technologies. Under the Cross-Licensing Agreement, the parties have agreed to allocate proprietary ownership of technology developed by either party based on the functionality of the technology. We will have proprietary rights to all technology related to the noninvasive measurement of vital signs measurements, and Cercacor will have proprietary ownership of all technology related to the noninvasive monitoring of non-vital signs measurements.

Manufacturing

Our strategy is to manufacture products in-house when it is efficient and cost-effective for us to do so. We currently manufacture our bedside and handheld pulse oximeters, our full line of disposable and reusable sensors and most of our patient cables in-house or through captive contract maquiladora operations. We maintain an approximate 70,700 square foot manufacturing facility in Irvine, California, and two separate manufacturing facilities in Mexicali and San Luis Rio Colorado, Mexico that have combined square footage of approximately 216,900 square feet, all three of which are International Organization for Standardization (ISO) 13485:2016 certified. We also maintain an approximate 86,500 square foot facility in Hudson, New Hampshire, a portion of which is used to manufacture advanced light emitting diodes and other advanced component-level technologies. In addition, we maintain an ISO 13485:2016 certified facility approximating 16,400 square feet in Danderyd, Sweden, a portion of which is used to manufacture ultra-compact mainstream and sidestream capnography and gas monitoring technologies. We will continue to utilize third-party contract manufacturers for products and subassemblies that can be more efficiently manufactured by these parties, such as our circuit boards. We monitor our third-party manufacturers and perform inspections and product tests at various steps in the manufacturing cycle to ensure compliance with our specifications. We also do full functional testing of our circuit boards.

Table of Contents

For raw materials, we and our contract manufacturers rely on sole source suppliers for some components, including digital signal processor chips and analog-to-digital converter chips. We and our contract manufacturers have taken steps to minimize the impact of a shortage or stoppage of shipments of digital signal processor chips or analog to digital converter chips, including maintaining a safety stock of inventory and designing software that may be easily ported to another digital signal processor chip. We believe that our sources of supply for components and raw materials are adequate. In the event of a delay or disruption in the supply of sole source components, we believe that we and our contract manufacturers will be able to locate additional sources of these sole source components on commercially reasonable terms and without experiencing material disruption in our business or operations.

We have agreements with certain major suppliers and each agreement provides for varying terms with respect to contract expiration, termination and pricing. Most of these agreements allow for termination upon specified notice, ranging from four to twelve months, to the non-terminating party. Certain of these agreements with our major suppliers allow for pricing adjustments, each agreement provides for annual pricing negotiation, and one agreement also guarantees us the most favorable pricing offered by the supplier to any of its other customers.

Employees

As of December 29, 2018, we had approximately 1,500 full-time employees and approximately 3,000 dedicated contract personnel worldwide.

Address

Our principal executive offices are located at 52 Discovery, Irvine, California 92618, and our telephone number at that address is (949) 297-7000. Our website address is www.masimo.com. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, proxy statements, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge at www.masimo.com as soon as reasonably practicable after electronically filing such reports with the SEC. Any information contained on, or that can be accessed through, our website is not incorporated by reference into, nor is it in any way a part of, this Annual Report on Form 10-K.

Table of Contents


ITEM 1A.	RISK FACTORS

The following risk factors and other information included in this Annual Report on Form 10-K should be carefully considered. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we presently deem less significant may also impair our business operations. If any of the following risks come to fruition, our business, financial condition, results of operations and future growth prospects would likely be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you could lose all or part of your investment.

Risks Related to Our Revenues

We currently derive the majority of our revenue from our Masimo SET^® platform, Masimo rainbow SET^™ platform and related products. If these technologies and related products do not continue to achieve market acceptance, our business, financial condition and results of operations would be adversely affected.

We are highly dependent upon the continued success and market acceptance of our proprietary Masimo SET^® technology that serves as the basis of our primary product offerings. Continued market acceptance of products incorporating Masimo SET^® will depend upon us continuing to provide evidence to the medical community that our products are cost-effective and offer significantly improved performance compared to conventional pulse oximeters. Health care providers that currently have significant investments in competitive pulse oximetry products may be reluctant to purchase our products. If hospitals and other health care providers do not believe our Masimo SET^® platform is cost-effective, safe or more accurate or reliable than competitive pulse oximetry products, they may not buy our products in sufficient quantities to enable us to generate revenue growth from the sale of these products. In addition, allegations regarding the safety and effectiveness of our products, whether or not substantiated, may impair or impede the acceptance of our products.

Some of our products are in development or have been recently introduced into the market and may not achieve market acceptance, which could limit our growth and adversely affect our business, financial condition and results of operations.

Many of our noninvasive measurement technologies are considered disruptive. These technologies have performance levels that we believe are acceptable for many clinical environments but may be insufficient in others. In addition, these technologies may perform better in some patients and settings than others. Over time, we hope to continue to improve the performance of these technologies and educate the clinical community on how to properly evaluate them. If we are successful in these endeavors, we expect these technologies will become more useful in more environments and will become more widely adopted. We are continuing to invest in sales and marketing resources to achieve market acceptance of these products, but are unable to guarantee that our technologies will achieve general market acceptance.

The degree of market acceptance of these products will depend on a number of factors, including:


•	perceived clinical benefits from our products;


•	perceived cost effectiveness of our products;


•	perceived safety and effectiveness of our products;


•	reimbursement available through government and private health care programs for using some of our products; and


•	introduction and acceptance of competing products or technologies.

If our products do not gain market acceptance or if our customers prefer our competitors’ products, our potential revenue growth would be limited, which would adversely affect our business, financial condition and results of operations.

Our ability to commercialize new products, new or improved technologies and additional applications for Masimo SET^® and our licensed rainbow^® technology is limited to certain markets by our Cross-Licensing Agreement with Cercacor Laboratories, Inc. (Cercacor), which may impair our growth and adversely affect our business, financial condition and results of operations.

Since 1998, we have been a party to a cross-licensing agreement with Cercacor, (as amended, the Cross-Licensing Agreement), under which we granted Cercacor:

•

an exclusive, perpetual and worldwide license, with sublicense rights, to use all Masimo SET^® technology owned by us, including all improvements to this technology, for the monitoring of non-vital signs parameters and to develop and sell devices incorporating Masimo SET^® for monitoring non-vital signs parameters in any product market in which a product is intended to be used by a patient or pharmacist rather than by a professional medical caregiver, which we refer to as the Cercacor Market; and

Table of Contents


•	a non-exclusive, perpetual and worldwide license, with sublicense rights, to use all Masimo SET^® technology owned by us for measurement of vital signs in the Cercacor Market.

Non-vital signs measurements consist of body fluid constituents other than vital signs measurements, including, but not limited to, carbon monoxide, methemoglobin, blood glucose, hemoglobin and bilirubin. Under the Cross-Licensing Agreement, we are only permitted to sell devices utilizing Masimo SET^® for the monitoring of non-vital signs parameters in markets where the product is intended to be used by a professional medical caregiver, including, but not limited to, hospital caregivers and alternate care facility caregivers, rather than by a patient or pharmacist, which we refer to as the Masimo Market. Accordingly, our ability to commercialize new products, new or improved technologies and additional applications for Masimo SET^® is limited. In particular, our inability to expand beyond the Masimo Market may limit our ability to maintain or increase our revenue and impair our growth.

Pursuant to the Cross-Licensing Agreement, we have licensed from Cercacor the right to make and distribute products in the Masimo Market that utilize rainbow^® technology for certain noninvasive measurements. As a result, the opportunity to expand the market for our products incorporating rainbow^® technology is also limited, which could limit our ability to maintain or increase our revenue and impair our growth.

We face competition from other companies, many of which have substantially greater resources than we do. If we do not successfully develop and commercialize enhanced or new products that remain competitive with products or alternative technologies developed by others, we could lose revenue opportunities and customers, and our ability to grow our business would be impaired, adversely affecting our financial condition and results of operations.

The medical device industry is intensely competitive and is significantly affected by new product introductions and other market activities of industry participants. A number of our competitors have substantially greater capital resources, larger product portfolios, larger customer bases, larger sales forces and greater geographic presence, have established stronger reputations with specific customers, and have built relationships with Group Purchasing Organizations and other hospital purchasing groups (collectively, GPOs) that may be more effective than ours. Our Masimo SET^® platform faces additional competition from companies developing products for use with third-party monitoring systems, as well as from companies that currently market their own pulse oximetry monitors. In addition, competitors with larger product portfolios than ours are engaging in bundling practices, whereby they offer increased discounts to hospitals that purchase their requirements for a variety of different products from the competitor, including products that we do not offer.

Rapid product development and technological advances within the medical device industry place our products at risk of obsolescence. Our long-term success depends upon the development and successful commercialization of new products, new or improved technologies and additional applications for our existing technologies. The research and development process is time-consuming and costly and may not result in products or applications that we can successfully commercialize. In particular, we may not be able to successfully commercialize our products for applications other than arterial blood oxygen saturation and pulse rate monitoring, such as for respiration rate, hemoglobin, carboxyhemoglobin and methemoglobin monitoring.

If we do not successfully adapt our products and applications both within and outside these measurements, we could lose revenue opportunities and customers. Furthermore, one or more of our competitors may develop products that are substantially equivalent to our U.S. Food and Drug Administration (FDA) cleared products, or those of our original equipment manufacturer (OEM) partners, in which case a competitor of ours may use our products or those of our OEM partners as predicate devices to more quickly obtain FDA clearance of their competing products. Competition could result in pressure from our customers to reduce the price of our products and place fewer orders for our products, which could, in turn, cause a reduction in our revenues and product gross margins, thereby adversely impacting our business, financial condition and results of operations.

Some of the world’s largest technology companies that have not historically operated in the healthcare or medical device space, such as Apple, Alphabet, Samsung and others, have developed or may develop products and technologies that may compete with our current or future products and technologies. These companies have substantially greater capital, research and development, and sales resources than we have. If we are unable to successfully compete against them, our financial performance could decline.

We depend on our domestic and international OEM partners for a portion of our revenue. If they do not devote sufficient resources to the promotion of products that use our technologies, our business would be harmed.

We are, and will continue to be, dependent upon our domestic and international OEM partners for a portion of our revenue through their marketing, selling and distribution of certain of their products that incorporate our technologies. Although we expect that our OEM partners will accept and actively market, sell and distribute products that incorporate our technologies, they may not do so. Because products that incorporate our technologies may represent a relatively small percentage of business for some of our OEM partners, they may have less incentive to promote these products over other products that do not incorporate these technologies.

Table of Contents

In addition, some of our OEM partners offer products that compete with ours and also may be involved in intellectual property disputes with us. Therefore, we cannot guarantee that our OEM partners, or any company that may acquire any of our OEM partners, will vigorously promote products incorporating our technologies. The failure of our OEM partners to successfully market, sell or distribute products incorporating our technologies, the termination of OEM agreements, the loss of OEM partners or the inability to enter into future OEM partnership agreements would have a material adverse effect on our business, financial condition and results of operations.

If we fail to maintain or develop relationships with GPOs, sales of our products would decline.

Our ability to sell our products to hospitals depends, in part, on our relationships with GPOs. Many existing and potential customers for our products are members of GPOs. GPOs negotiate pricing arrangements and contracts with medical supply manufacturers and distributors that may include provisions for sole sourcing and bundling, which generally reduce product purchasing decisions available to the hospitals.

These negotiated prices are made available to a GPO’s members. If we are not one of the providers selected by a GPO, the GPO’s members may be less likely or unlikely to purchase our products. If a GPO has negotiated a strict sole source, market share compliance or bundling contract for another manufacturer’s products, we may be prohibited from making sales to members of such GPO for the duration of such contractual arrangement. Shipments of our pulse oximetry products to customers that are members of GPOs represented more than 80% of our U.S. product sales for the year ended December 29, 2018. Our failure to renew our contracts with GPOs may cause us to lose market share and could have a material adverse effect on our business, financial condition and results of operations. In addition, if we are unable to develop new relationships with GPOs, our competitive position would likely suffer and our opportunities to grow our revenues and business would be harmed.

Inadequate levels of coverage or reimbursement from governmental or other third-party payers for our products, or for procedures using our products, may cause our revenue to decline.

Sales of our products depend in part on the reimbursement and coverage policies of governmental and private health care payers. The lack of adequate coverage and reimbursement for our products or the procedures in which our products are used may deter customers from purchasing our products.

We cannot guarantee that governmental or third-party payers will reimburse a customer for the cost of our products or the procedures in which our products are used. For example, some insurance carriers have issued policies denying coverage for transcutaneous hemoglobin measurement on the grounds that the technology is investigational in the outpatient setting. Other payers are continuing to investigate our products to determine if they will provide reimbursement to our customers. These trends could lead to pressure to reduce prices for our current and future products, cause a decrease in the size of the market or potentially increase competition, any of which could have a material adverse effect on our business, financial condition and results of operations.

We do not control payer decision-making with respect to coverage and payment levels for our products. Additionally, we expect many payers to continue to explore cost-containment strategies (e.g., comparative and cost-effectiveness analyses, so-called “pay-for-performance” programs implemented by various public government health care programs and private third-party payers, and expansion of payment bundling initiatives, and other such methods that shift medical cost risk to providers) that may potentially impact coverage and/or payment levels for our current products or products we develop in the future.

Outside of the U.S., reimbursement systems vary by country. These systems are often subject to the same pressures to curb rising health care costs and control health care expenditures as those in the U.S. In addition, as economies of emerging markets develop, these countries may implement changes in their health care delivery and payment systems. If adequate levels of reimbursement from third-party payers outside of the U.S. are not obtained, sales of our products outside of the U.S. may be adversely affected.

Consolidation in the healthcare industry could lead to demands for price concessions or to the exclusion of some suppliers from certain of our markets, which could have an adverse effect on our business, results of operations or financial condition.

Because healthcare costs have risen significantly over the past decade, numerous initiatives and reforms initiated by legislators, regulators and third-party payers to curb these costs have resulted in a consolidation trend in the healthcare industry to aggregate purchasing power. As the healthcare industry consolidates, competition to provide products and services to industry participants has become and will continue to become more intense. This has resulted in, and will likely continue to result in, greater pricing pressures and the exclusion of certain suppliers from important market segments as GPOs, independent delivery networks and large single accounts continue to use their market power to consolidate purchasing decisions for hospitals.

Table of Contents

We expect that market demand, government regulation, third-party coverage and reimbursement policies and societal pressures will continue to impact the worldwide healthcare industry, resulting in further business consolidations and alliances among our customers, which may reduce competition, exert further downward pressure on the prices of our products and adversely impact our business, financial condition and results of operations.

Our customers may reduce, delay or cancel purchases due to a variety of factors, such as lower hospital census levels or third-party guidelines, which could adversely affect our business, financial condition and results of operations.

Our customers are facing growing levels of uncertainties, including variations in overall hospital census for paying patients and the impact of such census variations on hospital budgets. As a result, many hospitals are reevaluating their entire cost structure, including the amount of capital they allocate to medical device technologies and products. Such developments could have a significant negative impact on our OEM customers who, due to their traditionally larger capital equipment sales model, could see declines in purchases from their hospital customers. This, in turn, could reduce our board sales to our OEM customers.

In addition, certain of our products, including our rainbow^® measurements such as carbon monoxide, methemoglobin and hemoglobin, that are sold with upfront license fees and more complex and expensive sensors, could also be impacted by hospital budget reductions.

States and other local regulatory authorities may issue guidelines regarding the appropriate scope and use of our products from time to time. For example, some of our noninvasive monitoring devices may be subject to authorization by individual states as part of the Emergency Medical Services (EMS) scope of practice procedures. A lack of inclusion into scope of practice procedures may limit adoption.

The loss of any large customer or distributor, or any cancellation or delay of a significant purchase by a large customer, could reduce our net sales and harm our operating results.

We have a concentration of OEM, distribution and direct customers. For example, sales to two just-in-time distributors each represented more than 10% of our product sales for the year ended December 29, 2018. We cannot provide any assurance that we will retain our current customers, groups of customers or distributors, or that we will be able to attract and retain additional customers in the future. If for any reason we were to lose our ability to sell to a specific group or class of customers, or through a distributor, we could experience a significant reduction in revenue, which would adversely impact our operating results.

Our sales could also be negatively affected by any rebates, discounts or fees that are required by, or offered to, GPOs and customers, including wholesalers or distributors. Additionally, some of our just-in-time distributors have been demanding higher fees, which we may be forced to pay in order to continue to offer products to our customers or which may force us to distribute our products directly to our customers. The loss of any large customer or distributor, or an increase in distributor fees, could have a material adverse effect on our business, financial condition and results of operations.

Our royalty and other revenue has historically consisted primarily of royalties received from Medtronic plc (Medtronic, formerly Covidien Ltd.) related to its U.S. sales, and more recently, revenue from non-recurring engineering (NRE) services for a certain OEM customer. However, Medtronic is not required to pay royalties to us on any sales occurring after October 6, 2018. In addition, we have completed the majority of our contracted NRE services and expect to complete the remaining NRE services next year. We currently do not expect to replace this royalty and NRE services revenue with revenue from other sources, and such loss of revenue will have an adverse effect on our future results of operations.

Imitation Masimo sensors and third-party medical device reprocessors that reprocess our single-patient-use sensors may harm our reputation. Also, these imitation and third-party reprocessed sensors, as well as genuine Masimo reprocessed sensors, are sold at lower prices than new Masimo sensors and could cause our revenue to decline, which may adversely affect our business, financial condition and results of operations.

We believe that other organizations are manufacturing and selling imitation Masimo sensors. In addition, certain medical device reprocessors have been collecting our used single-patient-use sensors from hospitals and then reprocessing, repackaging and reselling those sensors to hospitals. These imitation and third-party reprocessed sensors are sold at lower prices than new Masimo sensors. Our experience with both these imitation sensors and third-party reprocessed sensors is that they provide inferior performance, increased sensor consumption, reduced comfort and a number of monitoring problems. Notwithstanding these limitations, some of our customers have indicated a willingness to purchase some of their sensor requirements from these imitation manufacturers and third-party reprocessors in an effort to reduce their sensor costs.

These imitation and reprocessed sensors have led and may continue to lead to confusion with our genuine Masimo products; have reduced and may continue to reduce our revenue; and, in some cases, have harmed and may continue to harm our reputation if customers conclude incorrectly that these imitation or reprocessed sensors are original Masimo sensors.

Table of Contents

In addition, we have expended a significant amount of time and expense investigating issues caused by imitation and reprocessed sensors, troubleshooting problems stemming from such sensors, educating customers about why imitation and reprocessed sensors do not perform to their expectations, enforcing our proprietary rights against the imitation manufacturers and reprocessors, and enforcing our contractual rights under our customer contracts.

In response to these imitation sensors and third-party reprocessors, we have incorporated X-Cal^® technology into certain products to ensure our customers get the performance they expect by using genuine Masimo sensors and that such sensors do not continue to be used beyond their useful life. However, some customers may object to the X-Cal^® technology, potentially resulting in the loss of customers and revenues.

We also offer our own Masimo reprocessed sensors, which meet the same performance specifications as our new Masimo sensors, to our customers. Reprocessed sensors sold by us are also offered at a lower price and, therefore, may reduce certain customer demand for our new sensors. As a result, increased sales of our own Masimo reprocessed sensors may result in lower revenues, which could negatively impact our business, financial condition and results of operations.

Risks Related to Our Intellectual Property

If the patents we own or license, or our other intellectual property rights, do not adequately protect our technologies, we may lose market share to our competitors and be unable to operate our business profitably.

Our success depends significantly on our ability to protect our rights to the technologies used in our products. Our utilization of patent protection, trade secrets and a combination of copyright and trademark laws, as well as nondisclosure, confidentiality and other contractual arrangements, to protect our intellectual property afford us only limited protection and may not adequately protect our rights or permit us to gain or maintain any competitive advantage.

Our patents related to Masimo SET^® algorithm technology began to expire in 2011. Certain other patents related to our ProCal sensor technology began to expire in 2015. Additionally, upon the expiration of other issued or licensed patents, we may lose some of our rights to exclude competitors from making, using, selling or importing products using the technology based on the expired patents. Furthermore, in recent years, the U.S. Supreme Court has ruled on several patent cases and several laws have been enacted that, in certain situations, potentially narrows the scope of patent protection available and weakens the rights of patent owners. There can be no assurance that we will be successful in securing additional patents on commercially desirable improvements, that such additional patents will adequately protect our innovations or offset the effect of expiring patents, or that competitors will not be able to design around our patents.

In addition, third parties may challenge our issued patents through procedures such as Inter-Partes Review (IPR). In many IPR challenges, the U.S. Patent and Trademark Office (PTO) cancels or significantly narrows issued patent claims. IPR challenges could increase the uncertainties and costs associated with the maintenance, enforcement and defense of our issued and future patents and could have a material adverse effect on our business, financial condition and results of operations.

We also utilize unpatented proprietary technology and know-how and often rely on confidentiality agreements and intellectual property assignment agreements with our employees, OEM partners, independent distributors and consultants to protect such unpatented proprietary technology and know-how. However, such agreements may not be enforceable or may not provide meaningful protection for our proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements, or in the event that our competitors discover or independently develop similar or identical designs or other proprietary information.

We rely on the use of registered and common law trademarks with respect to the brand names of some of our products. Common law trademarks provide less protection than registered trademarks. Loss of rights in our trademarks could adversely affect our business, financial condition and results of operations.

The laws of foreign countries may not adequately protect our intellectual property rights.

Intellectual property protection laws in foreign countries differ substantially from those in the U.S. If we fail to apply for intellectual property protection in foreign countries, or if we cannot adequately protect our intellectual property rights in these foreign countries, our competitors may be able to compete more effectively against us, which could adversely affect our competitive position, as well as our business, financial condition and results of operations.

Table of Contents

If third parties claim that we infringe their intellectual property rights, we may incur liabilities and costs and may have to redesign or discontinue selling certain products.

Searching for existing intellectual property rights may not reveal important intellectual property and our competitors may also have filed for patent protection, which may not be publicly-available information, or claimed trademark rights that have not been revealed through our searches. In addition, some of our employees were previously employed at other medical device companies. We may be subject to claims that our employees have disclosed, or that we have used, trade secrets or other proprietary information of our employees’ former employers. Our efforts to identify and avoid infringing on third parties’ intellectual property rights may not always be successful. Any claims of patent or other intellectual property infringement against us, even those without merit, could:


•	be expensive and time consuming to defend and result in payment of significant damages to third parties;


•	force us to stop making or selling products that incorporate the intellectual property;


•	require us to redesign, reengineer or rebrand our products, product candidates and technologies;


•	require us to enter into royalty agreements that would increase the costs of our products;


•	require us to indemnify third parties pursuant to contracts in which we have agreed to provide indemnification for intellectual property infringement claims;


•	divert the attention of our management and other key employees; and


•	result in our customers or potential customers deferring or limiting their purchase or use of the affected products impacted by the claims until the claims are resolved;

any of which could have a material adverse effect on our business, financial condition and results of operations. In addition, new patents obtained by our competitors could threaten the continued commercialization of our products in the market even after they have already been introduced.

We believe competitors may currently be violating and may in the future violate our intellectual property rights. As a result, we may initiate litigation to protect and enforce our intellectual property rights, which may result in substantial expense and may divert management’s attention from implementing our business strategy.

We believe that the success of our business depends, in part, on obtaining patent protection for our products and technologies, defending our patents and preserving our trade secrets. We were previously involved in significant litigation to protect our patent positions related to some of our pulse oximetry signal processing patents that resulted in various settlements, most recently in 2016, and in view of some of the new market entrants, may be required to engage in additional litigation to protect our intellectual property in the future. In addition, we believe that an individual, who previously held a high level technical position with us, misappropriated our intellectual property for the benefit of himself and other companies. Our ongoing and future litigation could result in significant additional costs and further divert the attention of our management and key personnel from our business operations and the implementation of our business strategy and may not be successful or adequate to protect our intellectual property rights.

Risks Related to Our Regulatory Environment

Our failure to obtain and maintain FDA clearances or approvals on a timely basis, or at all, would prevent us from commercializing our current or upgraded products in the U.S., which could severely harm our business.

Unless an exemption applies, each medical device that we wish to market in the U.S. must first undergo premarket review pursuant to the Federal Food, Drug, and Cosmetic Act (FDCA) by receiving clearance of a 510(k) premarket notification, receiving clearance through the de novo review process, or obtaining approval of a premarket approval (PMA) application. Even if regulatory clearance or approval of a product is granted, the FDA may clear or approve our products only for limited indications for use. Additionally, the FDA may not grant 510(k) clearance on a timely basis, if at all, for new products or uses that we propose for Masimo SET^® or licensed rainbow^® technology.

The traditional FDA 510(k) clearance process for our products has generally taken between three to six months. However, our more recent experience and interactions with the FDA, along with information we have received from other medical device manufacturers, suggests that, in some cases, the FDA is requiring applicants to provide additional or different information and data for 510(k) clearance than it had previously required, and that the FDA may not rely on approaches that it had previously accepted to support 510(k) clearance. As a result, we have experienced lengthier FDA 510(k) review periods over the past few years, which have delayed the 510(k) clearance process for our products.

Table of Contents

To support our product applications to the FDA, we frequently are required to conduct clinical testing of our products. Such clinical testing must be conducted in compliance with FDA requirements pertaining to human research. Among other requirements, we must obtain informed consent from human subjects and approval by institutional review boards before such studies may begin. We must also comply with other FDA requirements such as monitoring, record-keeping, reporting and the submission of information regarding certain clinical trials to a public database maintained by the National Institutes of Health. In addition, depending on the risk posed by a study, we may be required to obtain the FDA’s approval of the study under an Investigational Device Exemption (IDE). Compliance with these requirements can require significant time and resources. If the FDA determines that we have not complied with such requirements, the FDA may refuse to consider the data to support our applications or may initiate enforcement actions.

Even though 510(k) clearances have been obtained, if safety or effectiveness problems are identified with our pulse oximeters incorporating Masimo SET^® and licensed rainbow^® technology, patient monitor devices, sensors, cables and other products, we may need to initiate a recall of such devices. Furthermore, our new products or significantly modified marketed products could be denied 510(k) clearance and be required to undergo the more burdensome PMA or de novo review processes. The process of obtaining a de novo classification or PMA approval is much more costly, lengthy and uncertain than the process for obtaining 510(k) clearance. De novo classification generally takes six months to one year from the time of submission of the de novo request, although it can take longer. Approval of a PMA generally takes one to three years from the time of submission of the PMA, but may be longer.

We sell consumer versions of our iSpO₂^®and MightySat^® pulse oximeters that are not intended for medical use. Some of our products or product features may also be exempted from the 510(k) process and/or other regulatory requirements in accordance with specific FDA guidance and policies, such as the FDA guidance related to mobile medical applications. In addition, some of our products or product features may not be subject to device regulation pursuant to Section 520(o) of the FDCA, which excludes certain software functions from the statutory definition of a device. If the FDA changes its policy or concludes that our marketing of these products is not in accordance with its current policy and/or Section 520(o) of the FDCA, we may be required to seek clearance or approval of these devices through the 510(k), de novo or PMA processes.

The failure of our OEM partners to obtain required FDA clearances or approvals for products that incorporate our technologies could have a negative impact on our revenue.

Our OEM partners are required to obtain their own FDA clearances in the U.S. for most products incorporating Masimo technologies. The FDA clearances we have obtained may not make it easier for our OEM partners to obtain clearances of products incorporating these technologies, or the FDA may not grant clearances on a timely basis, if at all, for any future products incorporating Masimo technologies that our OEM partners propose to market.

If we or our suppliers fail to comply with ongoing regulatory requirements, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

Our products, along with the manufacturing processes, labeling and promotional activities for our products, are subject to continual review and periodic inspections by the FDA and other regulatory bodies. Among other requirements, we and our suppliers are required to comply with the FDA’s Quality System Regulation (QSR), which governs the methods and documentation of the design, control testing, production, component suppliers control, quality assurance, complaint handling, labeling control, packaging, storage and shipping of our products. The FDA enforces the QSR through announced and unannounced inspections. We are also subject to similar state requirements and licenses.

In addition to the FDA, from time to time we are subject to inspections by the California Food and Drug Branch, international regulatory authorities, and other similar governmental agencies. The standards used by these regulatory authorities are complex and may differ from those used by the FDA.

Failure by us or one of our suppliers to comply with statutes and regulations administered by the FDA and other regulatory bodies or failure to adequately respond to any FDA Form 483 observations, any Food and Drug Branch notices of violation or any similar reports could result in, among other things, any of the following:


•	warning letters or untitled letters issued by the FDA;


•	fines, civil penalties, in rem forfeiture proceedings, injunctions, consent decrees and criminal prosecution;


•	import alerts;


•	unanticipated expenditures to address or defend such actions;


•	delays in clearing or approving, or refusal to clear or approve, our products;


•	withdrawals or suspensions of clearance or approval of our products or those of our third-party suppliers by the FDA or other regulatory bodies;

Table of Contents


•	product recalls or seizures;


•	orders for physician notification or device repair, replacement or refund;


•	interruptions of production or inability to export to certain foreign countries; and


•	operating restrictions.

If any of these items were to occur, it would harm our reputation and adversely affect our business, financial condition and results of operations.

Failure to obtain regulatory authorizations in foreign jurisdictions may prevent us from marketing our products abroad.

We currently market and intend to continue to market our products internationally. Outside of the U.S., we can generally market a product only if we receive a marketing authorization and, in some cases, pricing approval, from the appropriate regulatory authorities. The regulatory registration/licensing process varies among international jurisdictions and may require additional or different product testing than required to obtain FDA clearance. FDA clearance does not ensure new product registration/licensing by foreign regulatory authorities, and we may be unable to obtain foreign regulatory registration/licensing on a timely basis, if at all.

In addition, clearance by one foreign regulatory authority does not ensure clearance by any other foreign regulatory authority or by the FDA. If we fail to receive necessary approvals to commercialize our products in foreign jurisdictions on a timely basis, or at all, our business, financial condition and results of operations could be adversely affected.

Modifications to our marketed devices may require new regulatory clearances or premarket approvals, or may require us to cease marketing or to recall the modified devices until clearances or approvals are obtained.

We have made modifications to our devices in the past and we may make additional modifications in the future. Any modifications to an FDA-cleared device that could significantly affect its safety or effectiveness or that could constitute a major change in its intended use would require a new 510(k) clearance or possibly a de novo review or PMA. We may not be able to obtain such clearances or approvals in a timely fashion, or at all. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would have an adverse effect on our business, financial condition and results of operations. For device modifications that we conclude do not require a new 510(k), we may be required to recall and to stop marketing the modified devices if the FDA disagrees with our conclusion and requires new clearances or approvals for the modifications, which could have an adverse effect on our business, financial condition and results of operations.

Federal regulatory reforms may impact our ability to develop and commercialize our products and technologies.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the clearance or approval, manufacture and marketing of medical devices. For example, in August 2017, Congress enacted the FDA Reauthorization Act of 2017 (FDARA). FDARA reauthorized the FDA to collect device user fees, including a new user fee for de novo classification requests, and contained substantive amendments to the device provisions of the FDCA. Among other changes, FDARA required that the FDA update and revise its processes for scheduling inspections of device establishments, communicating about those inspections with manufacturers and providing feedback on the manufacturer’s responses to Form 483s. The statute also required that the FDA study the impact of device servicing, including third party servicers, and creates a new process for device sponsors to request classification of accessory devices as part of the PMA application for the parent device or to request a separate classification of accessory devices.

In addition, the FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business or products. Future regulatory changes could make it more difficult for us to obtain or maintain approval to develop and commercialize our products and technologies.

If our products cause or contribute to a death or serious injury, or malfunction in a way that would likely cause or contribute to a death or serious injury, we will be subject to medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions, including recall of our products.

Under the FDA medical device reporting regulations, we are required to report to the FDA any incident in which a product of ours may have caused or contributed to a death or serious injury or in which a product of ours malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. In addition, all manufacturers placing medical devices in the European Union (EU) are legally required to report any serious or potentially serious incidents involving devices produced or sold by the manufacturer to the relevant authority in those jurisdictions where any such incident occurred.

Table of Contents

The FDA and similar foreign regulatory authorities have the authority to require the recall of our commercialized products in the event of material deficiencies or defects in, for example, design, labeling or manufacture. The FDA must find that there is a reasonable probability that the device would cause serious adverse health consequences or death in order to require a recall. The standard for recalling deficient products may be different in foreign jurisdictions. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found or they become aware of a safety issue involving a marketed product. A government-mandated or voluntary recall by us or by one of our distributors could occur as a result of component failures, manufacturing errors, design or labeling defects or other deficiencies and issues.

We may initiate certain field actions, such as a correction or removal of our products in the future. Any correction or removal initiated by us to reduce a health risk posed by our device, or to remedy a violation of the FDCA caused by the device that may present a risk to health, must be reported to the FDA. If the FDA subsequently determines that a report was required for a correction or removal of our products that we did not believe required a report, we could be subject to enforcement actions.

Any recalls of our products or enforcement actions would divert managerial and financial resources and could have an adverse effect on our financial condition and results of operations. In addition, given our dependence upon patient and physician perceptions, any negative publicity associated with any recalls could materially and adversely affect our business, financial condition, results of operations and growth prospects.

Promotion of our products using claims that are off-label, unsubstantiated, false or misleading could subject us to substantial penalties.

Obtaining 510(k) clearance permits us to promote our products for the uses cleared by the FDA. Use of a device outside its cleared or approved indications is known as “off-label” use. Physicians may use our products off-label because the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. While we may request additional cleared indications for our current products, the FDA may deny those requests, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared product as a condition of clearance. If the FDA determines that our products were promoted for off-label use or that false, misleading or inadequately substantiated promotional claims have been made by us or our OEM partners, it could request that we or our OEM partners modify those promotional materials or take regulatory or enforcement actions, including the issuance of an untitled letter, warning letter, injunction, seizure, civil fine and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities may take action if they consider our communications, including promotional or training materials, to constitute promotion of an uncleared or unapproved use. If not successfully defended, enforcement actions related to off-label promotion could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In any such event, our reputation could be damaged, adoption of our products could be impaired and we could be subject to extensive fines and penalties.

Additionally, we must have adequate substantiation for the claims we make for our products. If any of our claims are determined to be false, misleading or deceptive, our products could be considered misbranded under the FDCA or in violation of the Federal Trade Commission Act. We could also face lawsuits from our competitors under the Lanham Act alleging that our marketing materials are false or misleading.

The regulatory environment governing information, cybersecurity and privacy laws is increasingly demanding and continues to evolve.

Personal privacy and data security have become significant issues in the U.S. Europe and in many other jurisdictions where we offer our products. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future.

Certain U.S. laws govern the transmission, security and privacy of individually identifiable information that we may obtain or have access to in connection with the operation of our business, including the conduct of clinical research trials or other research studies that may provide us with access to sensitive health and other personal information. We may be required to make costly system modifications to comply with these data privacy and security requirements. In addition, if we do not properly comply with applicable laws and regulations related to the protection of this information, we could be subject to criminal or civil sanctions. Internationally, the General Data Protection Regulation (GDPR) has recently taken effect in the European Economic Area (EEA) and many EEA jurisdictions have also adopted their own data privacy and protection laws in addition to the GDPR. Furthermore, other international jurisdictions, including South Korea, China and Australia, have also implemented laws relating to data privacy and protection. Although we believe that we are complying with the GDPR and similar laws, these laws are still relatively new. Therefore, as international data privacy and protection laws continue to evolve, and as new regulations, interpretive guidance and enforcement information becomes available, we may incur incremental costs to modify our business practices to comply with these requirements. In addition, our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees or agents.

Table of Contents

Violations of these laws, or allegations of such violations, could subject us to cash and non-cash penalties for noncompliance, disrupt our operations, involve significant management distraction and result in a material adverse effect on our business, financial condition and results of operations.

We may be subject to or otherwise affected by federal and state health care laws, including fraud and abuse laws, and could face substantial penalties if we are unable to fully comply with these laws.

Health care fraud and abuse laws potentially applicable to our operations include, but are not limited to:


•	the federal Anti-Kickback Statute, which prohibits, among other things, knowingly and willfully offering, paying, soliciting or receiving any bribe, kickback or other remuneration intended to induce the purchase, order or recommendation of an item or service reimbursable under a federal health care program (such as the Medicare or Medicaid programs);


•	the federal False Claims Act and other federal laws which prohibit, among other things, knowingly and willfully presenting, or causing to be presented, claims for payment from Medicare, Medicaid, other government payers or other third-party payers that are false or fraudulent;


•	state laws analogous to each of the above federal laws, such as state anti-kickback and false claims laws that may apply to items or services reimbursed by governmental programs and non-governmental third-party payers, including commercial insurers; and


•	the Physician Payments Sunshine Act (Sunshine Act), which requires medical device companies to track and publicly report, with limited exceptions, all payments and transfers of value to physicians and teaching hospitals in the U.S. If we fail to comply with the data collection and reporting obligations imposed by the Sunshine Act, we may be subject to substantial civil monetary penalties.

If we are found to have violated any such laws or other similar governmental regulations, including their foreign counterparts, that are directly or indirectly applicable to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion of our products from reimbursement under Medicare, Medicaid and other federal health care programs, and the curtailment or restructuring of our operations. Any penalties could adversely affect our ability to operate our business and our financial results. Any action against us for violation of these laws, even if we successfully defend against such action, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

Legislative and regulatory changes in the health care industry could have a negative impact on our financial performance. Furthermore, our business, financial condition, results of operations and cash flows could be significantly and adversely affected by health care reform legislation in the U.S. or in our key international markets.

Changes in the health care industry in the U.S. and abroad could adversely affect the demand for our products and the way in which we conduct our business. For example, the Patient Protection and Affordable Care Act (the ACA), enacted in 2010, required most individuals to have health insurance, established new regulations on health plans, created insurance-pooling mechanisms and reduced Medicare spending on services provided by hospitals and other providers. The ACA also imposed significant new taxes on medical device makers in the form of a 2.3% excise tax on U.S. medical device sales, as well as related compliance and reporting obligations. This medical device excise tax (MDET) has been temporarily suspended by Congress on a number of occasions, and most recently through December 31, 2019. The MDET may be reimposed on medical device makers beginning on January 1, 2020 if such suspension is not re-extended or the MDET is not permanently repealed.

Additionally, the long-term viability of the ACA, and its impact on our business and results of operations, remains uncertain. There have also been recent U.S. Congressional actions to repeal and replace the ACA, and future actions are expected. For example, on December 22, 2017, the Tax Cuts and Jobs Act of 2017 (the 2017 Tax Act) was signed into law. The 2017 Tax Act, among other things, eliminated the individual mandate requiring most Americans (other than those who qualify for a hardship exemption) to carry a minimum level of health coverage effective January 1, 2019. Although we cannot predict the ultimate content or timing of any healthcare reform legislation, potential changes resulting from any amendment, repeal or replacement of these programs, including any reduction in the future availability of healthcare insurance benefits, decrease the number of people who are insured, which could adversely affect our business and future results of operations.

Our medical devices and business activities are subject to rigorous regulation by the FDA and other federal, state and international governmental authorities. These authorities and members of Congress have been increasing their scrutiny over the medical device industry. In recent years, Congress, the Department of Justice, the Office of Inspector General of the Department of Health and Human Services, and the Department of Defense have issued subpoenas and other requests for information to medical device manufacturers, primarily related to financial arrangements with health care providers, regulatory compliance and marketing and product promotional practices. Furthermore, certain state governments have enacted legislation to limit and/or increase transparency of interactions with health care providers, pursuant to which we are required by law to disclose payments and other transfers of value to health care providers licensed by certain states.

Table of Contents

We anticipate that the government will continue to scrutinize our industry closely, and any new regulations or statutory provisions could result in delays or increased costs during the periods of product development, clinical trials and regulatory review and approval, as well as increased costs to assure compliance.

Risks Related to Our Business and Operations

We may experience conflicts of interest with Cercacor with respect to business opportunities and other matters.

Prior to our initial public offering in August 2007, our stockholders owned 99% of the outstanding shares of capital stock of Cercacor, and we believe that a number of our stockholders, including certain of our directors and executive officers, continue to own shares of Cercacor stock. Joe Kiani, our Chairman and Chief Executive Officer (CEO), is also the Chairman and CEO of Cercacor.

Due to the interrelated nature of Cercacor with us, conflicts of interest may arise with respect to transactions involving business dealings between us and Cercacor, potential acquisitions of businesses or products, the development and ownership of technologies and products, the sale of products, markets and other matters in which our best interests and the best interests of our stockholders may conflict with the best interests of the stockholders of Cercacor. In addition, we and Cercacor may disagree regarding the interpretation of certain terms in the Cross-Licensing Agreement. We cannot guarantee that any conflict of interest will be resolved in our favor, or that, with respect to our transactions with Cercacor, we will negotiate terms that are as favorable to us as if such transactions were with another third-party.

We will be required to assign to Cercacor and pay Cercacor for the right to use certain products and technologies we develop that relate to the monitoring of non-vital sign parameters, including improvements to Masimo SET^®.

Under the Cross-Licensing Agreement, if we develop certain products or technologies that relate to the noninvasive monitoring of non-vital sign parameters, including improvements to Masimo SET^® for the noninvasive monitoring of non-vital sign parameters, we would be required to assign these developments to Cercacor and then license the technology back from Cercacor in consideration for upfront payments and royalty obligations to Cercacor. Therefore, these products and technologies would be deemed to have been developed or improved exclusively by Cercacor. In addition, we will not be reimbursed by Cercacor for our expenses relating to the development or improvement of any such products or technologies, which expenses may be significant. As a result of these terms, we may not generate any revenue from the further development of certain products and technologies for the monitoring of non-vital sign parameters, including improvements to Masimo SET^®, which could adversely affect our business, financial condition and results of operations.

In the event that the Cross-Licensing Agreement is terminated for any reason, or Cercacor grants a license to rainbow^® technology to a third-party, our business would be adversely affected.

Cercacor owns all of the proprietary rights to certain rainbow^® technology developed with our proprietary Masimo SET^® for products intended to be used in the Cercacor Market, and all rights to any non-vital signs measurement for which we do not exercise an option pursuant to the Cross-Licensing Agreement. In addition, Cercacor has the right to terminate the Cross-Licensing Agreement or grant licenses covering rainbow^® technology to third parties if we breach certain terms of the agreement, including any failure to meet our minimum royalty payment obligations or failure to use commercially reasonable efforts to develop or market products incorporating licensed rainbow^® technology. If we lose our exclusive license to rainbow^® technology, we would lose the ability to prevent others from making, using, selling or importing products using rainbow^® technology in our market. As a result, we would likely be subject to increased competition within our market, and Cercacor or competitors who obtain a license to rainbow^® technology from Cercacor would be able to offer related products.

We may not be able to commercialize our products incorporating licensed rainbow^® technology cost-effectively or successfully.

As a result of the royalties that we must pay to Cercacor, it is generally more expensive for us to make products that incorporate licensed rainbow^® technology than products that do not include licensed rainbow^® technology.

We cannot assure you that we will be able to sell products incorporating licensed rainbow^® technology at a price the market is willing to accept. If we cannot commercialize our products incorporating licensed rainbow^® technology successfully, we may not be able to generate sufficient product revenue from these products to be profitable, which could adversely affect our business, financial condition and results of operations.

Table of Contents

Rights provided to Cercacor in the Cross-Licensing Agreement may impede a change in control of our company.

Under the Cross-Licensing Agreement, a change in control includes the resignation or termination of Joe Kiani from his position as CEO of either Masimo or Cercacor. A change in control also includes other customary events, such as the sale or merger of Masimo or Cercacor to a non-affiliated third-party or the acquisition of 50% or more of the voting power of Masimo or Cercacor by a non-affiliated third-party. In the event we undergo a change in control, we are required to immediately pay a $2.5 million fee to exercise an option to license technology developed by Cercacor for use in blood glucose monitoring. Additionally, our per product royalties payable to Cercacor will become subject to specified minimums, and the minimum aggregate annual royalties for licensed rainbow^® measurements payable to Cercacor related to carbon monoxide, methemoglobin, fractional arterial oxygen saturation, hemoglobin and blood glucose will increase to $15.0 million, plus up to $2.0 million for other rainbow^® measurements. Also, if the surviving or acquiring entity ceases to use “Masimo” as a company name and trademark following a change in control, all rights to the “Masimo” trademark will automatically be assigned to Cercacor. This could delay or discourage transactions involving an actual or potential change in control of us, including transactions in which our stockholders might otherwise receive a premium for their shares over our then-current trading price. In addition, our requirement to assign all future improvements for non-vital signs to Cercacor could impede a change in control of our company.

We may experience significant fluctuations in our quarterly and annual results and may not maintain our current levels of profitability in the future.

Our operating results have fluctuated in the past and are likely to fluctuate in the future. Many of the countries in which we operate, including the U.S. and several of the members of the EU, have experienced and continue to experience uncertain economic conditions resulting from global as well as local factors. In addition, continuing strength and growth in the U.S. economy has raised the probability of inflationary pressures and future interest rate hikes that have not been experienced in the U.S. for more than a decade. Our business or financial results may be adversely impacted by these uncertain economic conditions, including: adverse changes in interest rates, foreign currency exchange rates, tax laws or tax rates; inflation; contraction in the availability of credit in the marketplace due to legislation or other economic conditions, which may potentially impair our ability to access the capital markets on terms acceptable to us or at all; and the effects of government initiatives to manage economic conditions.

In addition, we cannot predict how future economic conditions will affect our critical customers, suppliers and distributors and any negative impact on our critical customers, suppliers or distributors may also have an adverse impact on our results of operations or financial condition. Our expense levels are based, in part, on our expectations regarding future revenue levels and are relatively fixed in the short term. As a result, if our revenue for a particular period was below our expectations, we would not be able to proportionately reduce our operating expenses for that period. Any revenue shortfall would have a disproportionately negative effect on our operating results for the period.

Due to these and other factors, you should not rely on our results for any one quarter as an indication of our future performance. If our operating results fail to meet or exceed the expectations of securities analysts or investors, our stock price could drop suddenly and significantly.

Future changes in accounting pronouncements and tax laws, or the interpretation thereof, could have a significant impact on our reported results, and may affect our historical reporting of previous transactions.

New accounting pronouncements or taxation rules, and evolving interpretations thereof, have occurred and are likely to occur in the future. For example, in recent years, the Financial Accounting Standards Board (FASB) issued new accounting standards that impact our reporting of revenue and expenses, including Accounting Standards Codification (ASC) Topic 606, Revenue from Contracts with Customers (ASC 606) and ASC Topic 842, Leases (ASC 842). Changes made by these new accounting standards not only apply prospectively, but depending on the method of adoption, may also recast previously reported results. In addition, the 2017 Tax Act, which took effect on January 1, 2018, included a number of changes to existing tax law impacting businesses including, among other things, a permanent reduction in the corporate income tax rate from 35% to 21%, a one-time transition tax on the “deemed repatriation” of cumulative undistributed foreign earnings as of December 31, 2017 and changes in the prospective taxation of the foreign operations of U.S. multinational companies. Moreover, Congressional leaders have recognized that the process of adopting extensive tax legislation in a short amount of time without hearings and substantial time for review is likely to have led to drafting errors, issues needing clarification and unintended consequences that will have to be reviewed in subsequent tax legislation or addressed in future tax regulations. We continue to evaluate the impact of ASC 606, ASC 842 and the 2017 Tax Act on our business, financial condition and results of operations. For additional information related to the impact of new accounting pronouncements and the 2017 Tax Act, please see Notes 2 and 18, respectively, to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K.

Table of Contents

Our results of operations could vary as a result of the methods, estimates and judgments that we use in applying our accounting policies.

The methods, estimates and judgments that we use in applying our accounting policies are, by their nature, subject to substantial risks, uncertainties and assumptions. Factors may arise over time that lead us to change our methods, estimates and judgments, the impact of which could significantly affect our results of operations. See “Critical Accounting Estimates” contained in Part II, Item 7 of this Annual Report on Form 10-K for additional information about these methods, estimates and judgments.

If we lose the services of our key personnel, or if we are unable to attract and retain other key personnel, we may not be able to manage our operations or meet our growth objectives.

We are highly dependent on our senior management, especially Joe Kiani, our CEO, and other key officers. We are also heavily dependent on our engineers and field sales team, including sales representatives and clinical specialists. The loss of the services of members of our key personnel or the inability to attract and retain qualified personnel in the future could prevent the implementation and completion of our objectives, including the development and introduction of our products. In general, our key personnel may terminate their employment at any time and for any reason without notice, unless the individual is a participant in our 2007 Severance Protection Plan, in which case the individual has agreed to provide us with six months’ notice if such individual decides to voluntarily resign.

We are involved, and may become involved in the future, in disputes and other legal or regulatory proceedings that, if adversely decided or settled, could materially and adversely affect our business, financial condition and results of operations.

We are, and may in the future become, party to litigation, regulatory proceedings or other disputes. In general, claims made by or against us in disputes and other legal or regulatory proceedings can be expensive and time consuming to bring or defend against, requiring us to expend significant resources and divert the efforts and attention of our management and other personnel from our business operations. These potential claims may include but are not limited to personal injury and class action lawsuits, intellectual property claims and regulatory investigations relating to the advertising and promotional claims about our products and employee claims against us based on, among other things, discrimination, harassment or wrongful termination. Any one of these claims, even those without merit, may divert our financial and management resources that would otherwise be used to benefit the future performance of our operations. Any adverse determination against us in these proceedings, or even the allegations contained in the claims, regardless of whether they are ultimately found to be without merit, may also result in settlements, injunctions or damages that could have a material adverse effect on our business, financial condition and results of operations.

Changes to government immigration regulations may materially affect our workforce and limit our supply of qualified professionals, or increase our cost of securing workers.

We recruit professionals on a global basis and must comply with the immigration laws in the countries in which we operate, including the U.S. Some of our employees are working under Masimo-sponsored temporary work visas, including H1-B visas. Statutory law limits the number of new H1-B temporary work permit petitions that may be approved in a fiscal year. Furthermore, there is a possibility that the current U.S. immigration visa program may be significantly overhauled. Any resulting changes to this visa program could impact our ability to recruit, hire and retain qualified skilled personnel. If we are unable to obtain work visas in sufficient quantities or at a sufficient rate for a significant period of time, our business, operating results and financial condition could be adversely affected.

The risks inherent in operating internationally, including the purchase, sale and shipment of our components and products across international borders, may adversely impact our business, financial condition and results of operations.

We currently derive approximately 30% of our net sales from international operations. In addition, we purchase a portion of our raw materials and components from international sources. The sale and shipment of our products across international borders, as well as the purchase of materials and components from international sources, subject us to extensive U.S. and foreign governmental trade regulations, including those related to conflict minerals. Compliance with such regulations is costly and we could be exposed to potentially significant penalties if we are found not to be in compliance with such regulations. Any failure to comply with applicable legal and regulatory obligations could impact us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export privileges, seizure of shipments, restrictions on certain business activities, and exclusion or debarment from government contracting. Also, the failure to comply with applicable legal and regulatory obligations could result in the disruption of our shipping, manufacturing and sales activities. Any material decrease in our international sales would adversely affect our business, financial condition and results of operations.

Table of Contents

In June 2016, the United Kingdom (UK) held a referendum pursuant to which voters elected to leave the EU, commonly referred to as Brexit. Although the long-term effects of Brexit will depend on any agreements the UK makes to retain access to the EU markets, Brexit has created additional uncertainties that may ultimately result in new regulatory costs and challenges for medical device companies and increased restrictions on imports and exports throughout Europe, which could adversely affect our ability to conduct and expand our operations in Europe and which may have an adverse effect on our business, financial condition and results of operations. Additionally, Brexit may increase the possibility that other countries may decide to leave the EU in the future.

In addition, our international operations expose us and our representatives, agents and distributors to risks inherent in operating in foreign jurisdictions. These risks include, but are not limited to:


•	the imposition of additional U.S. and foreign governmental controls or regulations;


•	the imposition of costly and lengthy new export licensing requirements;


•	a shortage of high-quality sales people and distributors;


•	the loss of any key personnel that possess proprietary knowledge, or who are otherwise important to our success in certain international markets;


•	changes in duties and tariffs, license obligations and other non-tariff barriers to trade;


•	the imposition of new trade restrictions;


•	the imposition of restrictions on the activities of foreign agents, representatives and distributors;


•	compliance with foreign tax laws, regulations and requirements;


•	pricing pressure;


•	changes in foreign currency exchange rates;


•	laws and business practices favoring local companies;


•	political instability and actual or anticipated military or political conflicts;


•	financial and civil unrest worldwide;


•	outbreaks of illnesses, pandemics or other local or global health issues;


•	the inability to collect amounts paid by foreign government customers to our appointed foreign agents;


•	longer payment cycles, increased credit risk and different collection remedies with respect to receivables; and


•	difficulties in enforcing or defending intellectual property rights.

The U.S. government has recently initiated substantial changes in U.S. trade policy and U.S. trade agreements, including the initiation of tariffs on certain foreign goods. In response to these tariffs, certain foreign governments, including China, have instituted or are considering imposing tariffs on certain U.S. goods. In addition, the U.S. is negotiating or has entered into new trade agreements that could affect adversely us, including the United States-Mexico-Canada Agreement, which if adopted, would replace the North American Free Trade Agreement. A trade war, trade barriers or other governmental actions related to tariffs, international trade agreements, import or export restrictions or other trade policies could adversely impact demand for our products, our costs, customers, suppliers and/or the U.S. economy or certain sectors thereof and, therefore, adversely affect our business, financial condition and results of operations.

The U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from promising or making improper payments to non-U.S. officials for the purpose of obtaining an advantage to secure or retain business. Because of the predominance of government-sponsored health care systems around the world, many of our customer relationships outside of the U.S. are with governmental entities and are therefore subject to such anti-bribery laws. We have adopted policies and practices that help us ensure compliance with these anti-bribery laws. However, such policies and practice may require us to invest in additional monitoring resources or forgo certain business opportunities in order to ensure global compliance with these laws.

Our operations may be adversely impacted by our exposure to risks related to foreign currency exchange rates.

We market our products in certain foreign markets through our subsidiaries and other international distributors. As a result, events that result in global economic uncertainty could significantly affect our results of operations in the form of gains and losses on foreign currency transactions and potential devaluation of the local currencies of our customers relative to the U.S. Dollar.

Table of Contents

While a majority of our sales are transacted in U.S. Dollars, some of our sales agreements with foreign customers provide for payment in currencies other than the U.S. Dollar. These foreign currency revenues, when converted into U.S. Dollars, can vary depending on average exchange rates during a respective period. Similarly, certain of our foreign subsidiaries transact business in their respective country’s local currency, which is also their functional currency. In addition, certain production costs related to our manufacturing operations in Mexico are denominated in Mexican Pesos. As a result, expenses of these foreign subsidiaries and certain production costs, when converted into U.S. Dollars, can vary depending on average monthly exchange rates during a respective period.

We are also exposed to foreign currency gains or losses on outstanding foreign currency denominated receivables and payables, as well as cash deposits. When converted to U.S. Dollars, these receivables, payables and cash deposits can vary depending on the monthly exchange rates at the end of the period. In addition, certain intercompany transactions may give rise to realized and unrealized foreign currency gains or losses based on the currency underlying such intercompany transactions. Accordingly, our operating results are subject to fluctuations in foreign currency exchange rates.

The balance sheets of our foreign subsidiaries whose functional currency is not the U.S. Dollar are translated into U.S. Dollars at the rate of exchange at the balance sheet date and the statements of operations and cash flows are translated into U.S. Dollars using the average monthly exchange rate during the period. Any foreign currency exchange gain or loss as a result of translating the balance sheets of our foreign subsidiaries whose functional currency is not the U.S. Dollar is included in equity as a component of accumulated other comprehensive income (loss).

We currently do not hedge our foreign currency exchange rate risk. As a result, changes in foreign exchange rates could have a material adverse effect on our business, financial condition and results of operations. For additional information related to our foreign currency exchange rate risk, please see Quantitative and Qualitative Disclosures about Market Risk in Part II, Item 7(a) of this Annual Report on Form 10-K.

We currently manufacture our products at several locations and any disruption to, expansion of, or changes in trade programs related to our manufacturing operations could adversely affect our business, financial condition and results of operations.

We rely on manufacturing facilities in California, New Hampshire, Mexico and Sweden that may be affected by natural or man-made disasters. Earthquakes are of particular significance since some of our facilities are located in earthquake-prone areas. We are also vulnerable to damage from other types of disasters, including power loss, attacks from extremist or terrorist organizations, epidemics, communication failures, fire, floods and similar events. Our facilities and the manufacturing equipment we use to produce our products would be difficult to replace and could require substantial time to repair if significant damage were to result from any of these occurrences.

If one of our manufacturing facilities was affected by a natural or man-made disaster, we would be forced to rely on third-party manufacturers if we could not shift production to our other manufacturing facilities. Furthermore, our insurance for damage to our property and the disruption of our business from casualties may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all. If the lease for any of our leased facilities is terminated, we are unable to renew any of our leases or we are otherwise forced to seek alternative facilities, or if we voluntarily expand one or more of our manufacturing operations to new locations, we may incur additional transition costs and experience a disruption in the supply of our products until the new facilities are available and operating. Additionally, we have occasionally experienced seasonality among our manufacturing workforce, and if we continue to experience such seasonality or other workforce shortages or otherwise have issues retaining employees at our manufacturing facilities, we may not be able to meet our customers’ demands.

Our manufacturing facilities in Mexico are authorized to operate under the Mexican Maquiladora, or IMMEX program. The IMMEX program allows us to import certain items from the U.S. into Mexico duty-free, provided that such items, after processing, are exported from Mexico within a stipulated timeframe. Maquiladora status, which is renewed periodically, is subject to various restrictions and requirements, including compliance with the terms of the IMMEX program and other local regulations. Failure to comply with the IMMEX program regulations, including any changes thereto, could increase our manufacturing costs and adversely affect our business, operating results and financial condition.

If we do not accurately forecast customer demand, we may hold suboptimal inventory levels that could adversely affect our business, financial condition and results of operations.

If we are unable to meet the demand of our customers, our customers may cancel orders or purchase products from our competitors, which could reduce our revenue and gross profit margin. Conversely, if product demand decreases, we may be unable to timely adjust our manufacturing cost structure, resulting in excess capacity, which would lower gross product margins. Similarly, if we are unable to forecast demand accurately, we could be required to record charges related to excess or obsolete inventory, which would also lower our gross margin.

Table of Contents

If we are unable to obtain key materials and components from sole or limited source suppliers, we will not be able to deliver our noninvasive patient monitoring solutions to customers.

We depend on certain sole or limited source suppliers for key materials and components, including digital signal processor chips and analog-to-digital converter chips, for our noninvasive patient monitoring solutions. Manufacturing problems may occur related to these and other outside sources if these suppliers fail to develop and ship products and components to us on a timely basis, or provide us with products and components that do not meet our quality standards and required quantities. In addition, from time to time there have been industry-wide shortages of certain components that we use in our noninvasive blood constituent patient monitoring solutions. We may also experience price increases for materials or components, with no guarantee that such increases can be passed along to our customers, which could adversely impact our gross margins.

If any of these problems occur, we may be unable to obtain substitute sources for these products and components on a timely basis or on terms acceptable to us, which could harm our ability to manufacture our own products and components profitably or on time.

If we fail to comply with the reporting obligations of the Securities Exchange Act of 1934 and Section 404 of the Sarbanes-Oxley Act of 2002, or if we fail to maintain adequate internal control over financial reporting, our business, results of operations and financial condition and investors’ confidence in us could be adversely affected.

We are required to prepare and disclose certain information under the Securities Exchange Act of 1934 in a timely manner and meet our reporting obligations in their entirety, and our failure to do so could subject us to penalties under federal securities laws and regulations of The Nasdaq Stock Market LLC, expose us to lawsuits and restrict our ability to access financing on favorable terms, or at all.

If we fail to maintain adequate internal controls over financial reporting, we may not be able to conclude on an ongoing basis that we have effective internal control over financial reporting in accordance with the Sarbanes-Oxley Act. Moreover, any failure to maintain compliance with the requirements of Section 404 of the Sarbanes-Oxley Act or any material weakness in our internal control environment could result in the loss of investor confidence in the reliability of our financial statements, which in turn could harm our business, negatively impact the trading price of our stock, and adversely affect investors’ confidence in our company and our ability to access capital markets for financing.

Changing laws and increasingly complex corporate governance and public disclosure requirements could have an adverse effect on our business and operating results.

Changing laws, regulations and standards relating to corporate governance and public disclosure, including the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank Act), the California Transparency in Supply Chains Act, the UK Modern Slavery Act and new regulations issued by the SEC and The Nasdaq Stock Market LLC, have and will create additional compliance requirements for us. To maintain high standards of corporate governance and public disclosure, we have invested in, and intend to continue to invest in, reasonably necessary resources to comply with evolving standards.

For example, the Dodd-Frank Act includes provisions regarding “conflict minerals” (generally tin, tantalum, tungsten and gold) that are mined in the Democratic Republic of Congo and adjoining countries (the DRC region), and in June 2016, the EU adopted its own regulation on conflict minerals that covers the sourcing of conflict minerals from anywhere in the world. The provisions of the Dodd-Frank Act require us to undertake comprehensive due diligence to determine whether conflict minerals used in our products, including any portion of our products manufactured by third parties, financed or benefited armed groups in the DRC region. The rules also require us to file conflict mineral reports with the SEC annually. We have incurred, and expect to continue to incur, additional costs to comply with these rules, including costs related to determining the source of origin of conflict minerals used in our products. Given the complexity of our supply chain, we may face difficulties if our suppliers are unwilling or unable to verify the origin of all conflict minerals used in our products.

In addition, stockholder litigation surrounding executive compensation and disclosure of executive compensation has increased with the passage of the Dodd-Frank Act. Furthermore, our stockholders may not continue to approve our advisory vote on named executive officer compensation that is required to be voted on by our stockholders annually pursuant to the Dodd-Frank Act. If we are involved in a lawsuit related to compensation matters or any other matters not covered by our directors’ and officers’ liability insurance, we may incur significant expenses in defending against such lawsuits, or be subject to significant fines or required to take significant remedial actions, each of which could adversely affect our business, financial condition and results of operations.

Table of Contents

If product liability claims are brought against us, we could face substantial liability and costs.

Our products are predominantly used in patient care and expose us to product liability claims and product recalls, including, but not limited to, those that may arise from unauthorized off-label use, malfunctions, design flaws or manufacturing defects related to our products or the use of our products with incompatible components or systems. We cannot be certain that our product liability insurance will be sufficient to cover any or all damages for product liability claims that may be brought against us in the future. Furthermore, we may not be able to obtain or maintain insurance in the future at satisfactory rates or in adequate amounts to protect us against any product liability claims.

Additionally, the laws and regulations regarding product liability are constantly evolving, both through the passage of new legislation at the state and federal levels and through new interpretations of existing legislation. For example, in February 2017, the Washington Supreme Court determined that, under the Washington Product Liability Act, medical device manufacturers have a duty to warn hospitals of any potential risks posed by their products. As the legal and regulatory landscape surrounding product liability change, we may become exposed to greater liability than currently anticipated.

Any losses that we may suffer from product liability claims, and the effect that any product liability litigation may have upon the reputation and marketability of our technology and products, together with the corresponding diversion of the attention of our key employees, may subject us to significant damages and could adversely affect our business, financial condition and results of operations.

Future acquisitions of businesses could negatively affect our business, financial condition and results of operations if we fail to integrate the acquired businesses successfully into our existing operations or if we discover previously undisclosed liabilities.

We have acquired several businesses since our inception and we may acquire additional businesses in the future. Future acquisitions may require debt or equity financing, which could be dilutive to our existing stockholders or reduce our earnings per share. Even if we complete acquisitions, there are many factors that could affect whether such acquisition will be beneficial to our business, including, without limitation:


•	payment of above-market prices for acquisitions and higher than anticipated acquisition costs;


•	issuance of common stock as part of the acquisition price or a need to issue stock options or other equity to newly-hired employees of target companies, resulting in dilution of ownership to our existing stockholders;


•	reduced profitability if an acquisition is not accretive to our business over either the short-term or the long-term;


•	difficulties in integrating any acquired companies, personnel, products and other assets into our existing business;


•	delays in realizing the benefits of the acquired company, products or other assets;


•	regulatory challenges;


•	cybersecurity and compliance related issues;


•	diversion of our management’s time and attention from other business concerns;


•	limited or no direct prior experience in new markets or countries we may enter;


•	unanticipated issues dealing with unfamiliar suppliers, service providers or other collaborators of the acquired company;


•	higher costs of integration than we anticipated;


•	write-downs or impairments of goodwill or other intangible assets associated with the acquired company;


•	difficulties in retaining key employees of the acquired business who are necessary to manage these acquisitions;


•	negative impacts on our relationships with our employees, clients or collaborators;


•	litigation or other claims in connection with the acquisition; and


•	changes in the overall financial model as certain acquired companies may have a different revenue, gross profit margin or operating expense profile.

Further, our ability to benefit from future acquisitions depends on our ability to successfully conduct due diligence, negotiate acceptable acquisition terms, evaluate prospective acquisitions and bring acquired technologies and/or products to market at acceptable margins and operating expense levels. Our failure in any of these tasks could result in unforeseen liabilities associated with an acquired company, acquiring a company on unfavorable terms or selecting and eventually acquiring a suboptimal acquisition target. We may also discover deficiencies in internal controls, data adequacy and integrity, product quality, regulatory compliance and product liabilities that we did not uncover prior to our acquisition of such businesses, which could result in us becoming subject to penalties or other liabilities. If we do not achieve the anticipated benefits of an acquisition as rapidly as expected, or at all, investors or analysts may not perceive the same benefits of the acquisition as we do.

Table of Contents

If these risks materialize, our stock price could be materially adversely affected. Any difficulties in the integration of acquired businesses or unexpected penalties or liabilities in connection with such businesses could have a material adverse effect on our business, financial condition and results of operations.

We may incur environmental and personal injury liabilities related to certain hazardous materials used in our operations.

Certain manufacturing processes for our products may involve the storage, use, generation and disposal of certain hazardous materials and wastes, including silicone adhesives, solder and solder paste, sealants, epoxies and various solvents such as methyl ethyl ketone, acetone and isopropyl alcohol. As a result, we are subject to certain environmental laws, as well as certain other laws and regulations, that restrict the materials that can be used in our products or in our manufacturing processes. For example, products that we sell in Europe are subject to regulation in the EU markets under the Restriction of the Use of Hazardous Substances Directive (RoHS). RoHS prohibits companies from selling products that contain certain hazardous materials in EU member states. In addition, the EU’s Registration, Evaluation, Authorization, and Restriction of Chemicals Directive also restricts substances of very high concern in products. Compliance with such regulations may be costly and, therefore, we may incur significant costs to comply with these laws and regulations.

In addition, new environmental laws may further affect how we manufacture our products, how we use, generate or dispose of hazardous materials and waste, or further affect what materials can be used in our products. Any required changes to our operations may increase our manufacturing costs, detrimentally impact the performance of our products, add greater testing lead-times for product introductions or have other similar effects.

In connection with our research and manufacturing activities, we use, and our employees may be exposed to, materials that are hazardous to human health, safety or the environment. The risk of accidental injury to our employees or contamination from these materials cannot be eliminated, and we could be held liable for any resulting damages, the related liability for which could exceed our reserves. We do not specifically insure against environmental liabilities. If an enforcement action were to occur, our reputation and our business and financial condition may be harmed, even if we were to prevail or settle the action on terms favorable to us.

We rely significantly on information technology and any failure, inadequacy, interruption or security lapse of that technology, including any cybersecurity incidents, could harm our ability to operate our business effectively.

Increased global cybersecurity vulnerabilities, cybersecurity threats, and sophisticated and targeted cybersecurity attacks pose a risk to the security of Masimo’s and our customers’, partners’, suppliers’ and third-party service providers’ products, systems and networks, including the confidentiality, availability and integrity of any underlying information and data. Our ability to effectively manage and maintain our internal business information, and to ship products to customers and invoice them on a timely basis, depends significantly on our enterprise resource planning system and other information systems. Portions of our information technology systems may experience interruptions, delays or cessations of service or produce errors in connection with ongoing systems implementation work. In addition, interfaces between our products and our customers’ computer networks could provide additional opportunities for cybersecurity attacks on us and our customers. The techniques used to attack computer systems are sophisticated, change frequently and may originate from less regulated and remote areas of the world. Cybersecurity attacks in particular are evolving and include, but are not limited to, threats, malicious software, ransom ware, attempts to gain unauthorized access to data and other electronic security breaches that could lead to disruptions in systems, misappropriation of confidential or otherwise protected information and corruption of data. As a result, there can be no assurance that our protective measures will prevent or detect security breaches that could have a significant impact on our business, reputation, financial condition and results of operations.

The failure of these systems to operate or integrate effectively with other internal, customer, supplier or third-party service provider systems and to protect the underlying information technology system and data integrity, including from cyber-attacks, intrusions or other breaches or unauthorized access of these systems, or any failure by us to remediate any such attacks or breaches, may also result in damage to our reputation or competitiveness, delays in product fulfillment and reduced efficiency of our operations, and could require significant capital investments to remediate any such failure, problem or breach, all of which could adversely affect our business, financial condition and results of operations.

From time to time, we may carry out strategic initiatives that could negatively impact our business, financial condition and results of operations.

We expect to continue to carry out strategic initiatives and investments that we believe are necessary to grow our revenues and expand our business, both in the U.S. and abroad. For example, we have continued to invest in international expansion programs designed to increase our worldwide presence and take advantage of market expansion opportunities around the world. Although we believe these initiatives and investments continue to be in the long-term best interests of Masimo and our stockholders, there are no assurances that such initiatives and investments will yield favorable results for us.

Table of Contents

Accordingly, if these initiatives and investments are not successful, our business, financial condition and results of operations could be adversely affected.

Our Credit Agreement contains certain covenants and restrictions that may limit our flexibility in operating our business.

Our Credit Agreement dated December 17, 2018 (Credit Facility) with JPMorgan Chase Bank, N.A., as Administrative Agent and a Lender, and Bank of the West, a Lender, contains various affirmative covenants and restrictions that limit our ability to engage in specified types of transactions, including:


•	incurring specified types of additional indebtedness (including guarantees or other contingent obligations);


•	paying dividends on, repurchasing or making distributions in respect of our common stock or making other restricted payments, subject to specified exceptions;


•	making specified investments (including loans and advances);


•	selling or transferring certain assets;


•	creating certain liens;


•	consolidating, merging, selling or otherwise disposing of all or substantially all of our assets; and


•	entering into certain transactions with any of our affiliates.

In addition, under our Credit Facility, we are required to satisfy and maintain specified financial ratios and other affirmative covenants. Our ability to meet those financial ratios and affirmative covenants could be affected by events beyond our control and, therefore, we cannot be assured that we will be able to continue to satisfy these requirements. A breach of any of these ratios or covenants could result in a default under our Credit Facility. Upon the occurrence of an event of default, the Lenders could elect to declare all amounts outstanding under the Credit Facility immediately due and payable, terminate all commitments to extend further credit and pursue legal remedies for recovery, all of which could adversely affect our business and financial condition. As of December 29, 2018, we had no amounts outstanding under the Credit Facility and were in compliance with all applicable covenants. See Note 13 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information on our Credit Facility.

We may experience conflicts of interest with respect our CEO’s role in the Patient Safety Movement Foundation.

Joe Kiani, our Chairman and CEO, founded the Patient Safety Movement Foundation in 2012 with the aim of eliminating preventable deaths caused by medical errors. Conflicts of interest issues may arise between our business and customers and the objectives of the Patient Safety Movement Foundation. Recommendations and other actions encouraged by the Patient Safety Movement Foundation may not favor our products. Additionally, some hospitals and other healthcare providers may disagree with the Patient Safety Movement Foundation’s actions or recommendations and disfavor Masimo products because of Mr. Kiani’s role in the Patient Safety Movement Foundation, which could adversely affect our business, financial condition and results of operations. Mr. Kiani’s role in the Patient Safety Movement Foundation and our support of it may also result in the actions of the Patient Safety Movement Foundation being deemed actions of ours. This could result in Masimo being held liable for any acts of the Patient Safety Movement Foundation that would not be in compliance with applicable law if performed by Masimo, which could subject us to fines and other penalties.

Risks Related to Our Stock

Our stock price may be volatile, and your investment in our stock could suffer a decline in value.

There has been and could continue to be significant volatility in the market price and trading volume of equity securities. For example, our closing stock price ranged from $82.06 to $125.32 per share from January 2, 2018 to December 29, 2018. Factors contributing to our stock price volatility may include our financial performance, as well as broader economic, political and market factors. In addition to the other risk factors previously discussed in this Annual Report on Form 10-K, there are many other factors that we may not be able to control that could have a significant effect on our stock price. These include, but are not limited to:


•	actual or anticipated fluctuations in our operating results or future prospects;


•	our announcements or our competitors’ announcements of new products;


•	the public’s reaction to our press releases, our other public announcements and our filings with the SEC;


•	strategic actions by us or our competitors, such as acquisitions or restructurings;


•	new laws or regulations or new interpretations of existing laws or regulations applicable to our business;

Table of Contents


•	changes in accounting standards, policies, guidance, interpretations or principles;


•	changes in our growth rates or our competitors’ growth rates;


•	developments regarding our patents or proprietary rights or those of our competitors;


•	ongoing legal proceedings;


•	our inability to raise additional capital as needed;


•	concerns or allegations as to the safety or efficacy of our products;


•	changes in financial markets or general economic conditions, including the effects of recession or slow economic growth in the U.S. and abroad;


•	sales of stock by us or members of our management team, our Board of Directors (Board) or certain institutional stockholders; and


•	changes in stock market analyst recommendations or earnings estimates regarding our stock, other comparable companies or our industry generally.

Therefore, you may not be able to resell your shares at or above the price you paid for them.

Concentration of ownership among our existing directors, executive officers and principal stockholders may prevent new investors from influencing significant corporate decisions.

As of December 29, 2018, our current directors and executive officers and their affiliates, in the aggregate, beneficially owned approximately 11.3% of our outstanding stock. Subject to any fiduciary duties owed to our other stockholders under Delaware law, these stockholders may be able to exercise significant influence over matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, and will have some control over our management and policies. Some of these persons or entities may have interests that are different from yours. For example, these stockholders may support proposals and actions with which you may disagree or which are not in your best interests. The concentration of ownership could delay or prevent a change in control of us, or otherwise discourage a potential acquirer from attempting to obtain control of us, which in turn could reduce the price of our stock.

In addition, these stockholders could use their voting influence to maintain our existing management and directors in office or support or reject other management and Board proposals that are subject to stockholder approval, such as amendments to our employee stock plans and approvals of significant financing transactions.

Our investors could experience substantial dilution of their investments as a result of subsequent exercises of our outstanding options, vesting of outstanding restricted stock units (RSUs) and performance stock units (PSUs), or the grant of future equity awards by us.

As of December 29, 2018, approximately 11.9 million shares of our common stock were reserved for issuance under our equity incentive plans, of which approximately 5.7 million shares were subject to options outstanding at such date at a weighted-average exercise price of $43.61 per share, approximately 2.7 million shares were subject to outstanding RSUs, approximately 0.3 million shares were subject to outstanding PSUs and approximately 3.2 million shares were available for future awards under our 2017 Equity Incentive Plan. Over the past 24 months, we have experienced higher rates of stock option exercises compared to many earlier periods, and this trend may continue. To the extent outstanding options are exercised or outstanding RSUs or PSUs vest, our existing stockholders may incur dilution. We rely on equity awards to motivate current employees and to attract new employees. The grant of future equity awards by us to our employees and other service providers may further dilute our stockholders.

Future resales of our stock, including those by our insiders and a few investment funds, may cause our stock price to decline.

A significant portion of our outstanding shares are held by our directors, our executive officers and a few investment funds. Resales by these stockholders of a substantial number of such shares, announcements of any proposed resale of substantial amounts of our stock or the perception that substantial resales may be made, could significantly reduce the market price of our stock. Some of our directors and executive officers have entered into Rule 10b5-1 trading plans pursuant to which they have arranged to sell shares of our stock from time to time in the future. Generally, these sales require public filings. Actual or potential sales by these insiders, including those under a pre-arranged Rule 10b5-1 trading plan, could be interpreted by the market as an indication that the insider has lost confidence in our stock and reduce the market price of our stock.

Table of Contents

We have registered and expect to continue to register shares reserved under our equity plans pursuant to Registration Statements on Form S-8. All shares issued pursuant to a Registration Statement on Form S-8 can be freely sold in the public market upon issuance, subject to restrictions on our affiliates under Rule 144. If a large number of these shares are sold in the public market, the sales could reduce the trading price of our stock.

Our corporate documents and Delaware law contain provisions that could discourage, delay or prevent a change in control of our company, prevent attempts to replace or remove current management and reduce the market price of our stock.

Provisions in our amended and restated certificate of incorporation and amended and restated bylaws may discourage, delay or prevent a merger or acquisition involving us that our stockholders may consider favorable. For example, our amended and restated certificate of incorporation authorizes our Board to issue up to 5.0 million shares of “blank check” preferred stock. As a result, without further stockholder approval, our Board has the authority to attach special rights, including voting and dividend rights, to this preferred stock, including pursuant to a stockholder rights plan. With these rights, preferred stockholders could make it more difficult for a third-party to acquire us. In addition, our amended and restated certificate of incorporation provides for a staggered board of directors, whereby directors serve for three year terms, with one-third of the directors coming up for reelection each year. A staggered Board will make it more difficult for a third-party to obtain control of our Board through a proxy contest, which may be a necessary step in an acquisition of us that is not favored by our Board.

We are also subject to anti-takeover provisions under the General Corporation Law of the State of Delaware. Under these provisions, if anyone becomes an “interested stockholder,” we may not enter into a “business combination” with that person for three years without special approval, which could discourage a third-party from making a takeover offer and could delay or prevent a change in control of us. For purposes of these provisions, an “interested stockholder” generally means someone owning 15% or more of our outstanding voting stock or an affiliate of ours that owned 15% or more of our outstanding voting stock during the past three years, subject to certain exceptions as described in the General Corporation Law of the State of Delaware.

We may elect not to declare cash dividends on our stock, may elect to only pay dividends on an infrequent or irregular basis, or may elect not to make any additional stock repurchases. As a result, any return on your investment may be limited to the value of our stock. In addition, the payment of any future dividends or the repurchase of our stock might limit our ability to pursue other growth opportunities.

Our Board may from time to time declare, and we may pay, dividends on our outstanding shares in the manner and upon the terms and conditions provided by law. However, we may elect to retain all future earnings for the operation and expansion of our business, rather than paying cash dividends on our stock.

Any payment of cash dividends on our stock will be at the discretion of our Board and will depend upon our results of operations, earnings, capital requirements, financial condition, business prospects, contractual restrictions and other factors deemed relevant by our Board. In the event our Board declares any dividends, there is no assurance with respect to the amount, timing or frequency of any such dividends.

In July 2018, our Board approved a stock repurchase program, authorizing us to purchase up to 5.0 million additional shares of our common stock over a period of up to three years (2018 Repurchase Program). Any repurchase of our common stock under the 2018 Repurchase Program will be at the discretion of a committee comprised of our CEO and Chief Financial Officer, and will depend on several factors, including, but not limited to, results of operations, capital requirements, financial conditions, available capital from operations or other sources and the market price of our common stock. Therefore, there is no assurance with respect to the amount, price or timing of any such repurchases. We may elect to retain all future earnings for the operation and expansion of our business, rather than repurchasing additional outstanding shares. For additional information related to our 2018 Repurchase Program, please see Note 15, to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K.

In the event we pay dividends, or make any stock repurchases in the future, our ability to finance any material expansion of our business, including through acquisitions, investments or increased capital spending, or to fund our operations, may be limited. In addition, any repurchases we may make in the future may not prove to be at optimal prices. Our Board may modify or amend the 2018 Repurchase Program, or adopt a new stock repurchase program, at any time at its discretion without stockholder approval.


ITEM 1B.	UNRESOLVED STAFF COMMENTS

None.

Table of Contents

ITEM 2. PROPERTIES

We own approximately 213,400 square feet of property in Irvine, California that houses our corporate headquarters, manufacturing and U.S. research and development activities. We also own approximately 86,500 square feet of property in Hudson, New Hampshire, which is used to manufacture advanced light emitting diodes and other advanced component-level technologies, as well as warehousing and administrative operations.

We continue to lease and occupy various buildings in Irvine, California approximating a total of 176,000 square feet for product manufacturing, warehousing, distribution and sales support operations. These leases expire from November 2019 through November 2026. We also operate two separate facilities in Mexicali and San Luis Rio Colorado, Mexico with combined square footage of approximately 216,900 square feet, which are used to manufacture our products under a shelter labor agreement with Industrial Vallera de Mexicali, S.A. de C.V. (IVEMSA). IVEMSA leases these manufacturing facilities directly from the owners of the properties under separate agreements. These leases expire in June 2021.

Our international headquarters are located in approximately 13,500 square feet of leased office space in Neuchâtel, Switzerland. This office space is focused on operations that include sales, marketing, customer service and other administrative functions. In addition, we currently lease approximately 19,800 square feet of space in Canada, which we use primarily for research, development, sales and marketing activities. We also lease approximately 16,400 square feet in Danderyd, Sweden, primarily for manufacturing, research, development and administrative functions related to our capnography and gas monitoring products. Our operations in various cities within Japan are located in approximately 14,600 square feet of leased space that we use for sales, marketing, customer service, administrative and warehousing operations. We also maintain a number of small sales offices throughout Europe, Asia, India, the Middle East, Australia and Latin America. We believe that our existing facilities are adequate to meet our needs and that existing needs and future growth can be accommodated by leasing alternative or additional space.


ITEM 3.	LEGAL PROCEEDINGS

The information set forth in Note 19 to our accompanying consolidated financial statements under the caption “Litigation” included in Part IV, Item 15(a) of this Annual Report on Form 10-K is incorporated herein by reference.


ITEM 4.	MINE SAFETY DISCLOSURES

Not applicable.

Table of Contents

PART II


ITEM 5.	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our stock is traded on the Nasdaq Global Select Market under the symbol “MASI”. As of February 12, 2019, the closing price of our stock was $129.74 per share, and the number of stockholders of record was 20. We believe that the number of beneficial owners is substantially greater than the number of record holders because a large portion of our stock is held of record through brokerage firms in “street name.”

Stock Performance Graph

The following stock performance graph and related information shall not be deemed “soliciting material” or to be “filed” with the SEC, nor shall such information be incorporated by reference into any future filing under the Securities Act or Exchange Act, except to the extent that we specifically incorporate it by reference into such filing.

The following stock performance graph compares total stockholder returns for Masimo Corporation from December 29, 2012 through December 29, 2018 against the Nasdaq Market Composite Index and Nasdaq Medical Equipment Index, assuming a $100 investment made on December 28, 2013. Each of the two comparative measures of cumulative total return assumes reinvestment of dividends. The stock performance shown on the graph below is not necessarily indicative of future price performance.

Table of Contents

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*

Among Masimo Corporation, the Nasdaq Market Composite Index, and

the Nasdaq Medical Equipment Index

*$100 invested on 12/28/13 in stock or 01/01/11 in index, including reinvestment of dividends. Indexes calculated on month-end basis.

Repurchases and Withholdings of Issuer Securities

In September 2015, our Board of Directors (Board) authorized a stock repurchase program, whereby we could purchase up to 5.0 million shares of our common stock over a period of up to three years (2015 Repurchase Program). A total of 3.1 million shares were purchased by us pursuant to the 2015 Repurchase Program prior to its expiration in September 2018.

In July 2018, the Board approved a new stock repurchase program, authorizing us to purchase up to 5.0 million additional shares of its common stock over a period of up to three years (2018 Repurchase Program). The 2018 Repurchase Program became effective in September 2018 upon the expiration of the 2015 Repurchase Program. We expect to fund the 2018 Repurchase Program through its available cash, cash expected to be generated from future operations and other potential sources of capital. The 2018 Repurchase Program can be carried out at the discretion of a committee comprised of our Chief Executive Officer (CEO) and Chief Financial Officer (CFO) through open market purchases, one or more Rule 10b5-1 trading plans, block trades and privately negotiated transactions. Any repurchases under the 2018 Repurchase Plan are subject to the availability of stock, general market conditions, the trading price of the stock, available capital, alternative uses for capital and our financial performance. There were no repurchases of stock under the 2018 Repurchase Program during the three months ended December 29, 2018.

Table of Contents


ITEM 6.	SELECTED FINANCIAL DATA

The following tables reflect selected financial data derived from our consolidated financial statements for each of the last five years. The consolidated statement of operations data for the years ended December 29, 2018, December 30, 2017 and December 31, 2016 and the consolidated balance sheet data as of December 29, 2018 and December 30, 2017 were derived from our audited consolidated financial statements included in this Annual Report on Form 10-K. The consolidated statement of operations data for the years ended January 2, 2016 and January 3, 2015, and the consolidated balance sheet data as of December 31, 2016, January 2, 2016 and January 3, 2015 were derived from our audited consolidated financial statements that are not included in this Annual Report on Form 10-K. Historical results are not necessarily indicative of future results.

Certain information presented as of and for the periods ended December 30, 2017 and December 31, 2016 have been restated to reflect the full retrospective application of the new revenue accounting standard, Accounting Standards Update (ASU) No. 2014-09, Revenue (Topic 606): Revenue from Contracts with Customers (ASU 2014-09). Information presented as of and for the periods ended January 2, 2016 and January 3, 2015 have not been restated and continue to reflect the prior revenue recognition guidance pursuant to ASC Topic 605, Revenue Recognition. See Note 2 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information related to our adoption of this new accounting standard.

The selected financial data set forth below should be read in conjunction with our consolidated financial statements, the related notes and Item 7 - “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this Annual Report on Form 10-K.

Table of Contents



	Year ended December 29, 2018			Year ended December 30, 2017 As Adjusted			Year ended December 31, 2016 As Adjusted			Year ended January 2, 2016			Year ended January 3, 2015
	(in thousands, except per share amounts)
Statement of Operations⁽¹⁾:
Revenue:
Product	$	829,874		$	738,242		$	673,962		$	599,334		$	556,764
Royalty and other revenue	28,415			52,006			38,936			30,777			29,879
Total revenue	858,289			790,248			712,898			630,111			586,643
Cost of goods sold	283,397			268,216			234,560			220,128			195,864
Gross profit	574,892			522,032			478,338			409,983			390,779
Operating expenses:
Selling, general and administrative	289,456			276,292			254,707			252,725			241,016
Research and development	76,967			61,953			57,686			56,617			56,581
Litigation settlement, award and/or defense costs	425			—			(270,000		)	(19,609		)	(10,331		)
Total operating expenses	366,848			338,245			42,393			289,733			287,266
Operating income	208,044			183,787			435,945			120,250			103,513
Non-operating (income) expense	(5,732		)	(2,013		)	2,429			3,905			1,472
Income before provision for income taxes	213,776			185,800			433,516			116,345			102,041
Provision for income taxes	20,233			61,011			122,419			34,845			27,678
Net income including noncontrolling interests	193,543			124,789			311,097			81,500			74,363
Net income (loss) attributable to noncontrolling interests	—			—			—			(1,800		)	1,845
Net income attributable to Masimo Corporation stockholders	$	193,543		$	124,789		$	311,097		$	83,300		$	72,518

Net income per common share attributable to Masimo Corporation stockholders⁽²⁾:
Basic	$	3.70		$	2.42		$	6.28		$	1.62		$	1.33
Diluted	$	3.45		$	2.23		$	5.85		$	1.55		$	1.30
Weighted-average number of common shares:
Basic	52,296			51,516			49,530			51,311			54,708
Diluted	56,039			55,874			53,195			53,707			55,571

______________

⁽¹⁾

Cercacor was consolidated as a variable interest entity within our financial statements for all periods prior to January 3, 2016. Accordingly, all intercompany royalties, option and licensing fees, and other charges between us and Cercacor for such periods have been eliminated in the consolidation. For additional discussion of Cercacor, see Note 3 to our accompanying consolidated financial statements in Part IV, Item 15(a) of this Annual Report on Form 10-K.


⁽²⁾	See Note 2 to our accompanying consolidated financial statements in Part IV, Item 15(a) of this Annual Report on Form 10-K for a description of the method used to compute basic and diluted net income per common share.



	December 29, 2018		December 30, 2017 As Adjusted		December 31, 2016 As Adjusted		January 2, 2016		January 3, 2015
	(in thousands)
Balance Sheet Data:
Cash, cash equivalents and short-term investments	$	552,490	$	315,302	$	305,970	$	132,317	$	134,453
Working capital	637,490		430,041		289,830		166,509		173,182
Total assets	1,154,818		905,436		814,352		601,735		565,006
Total debt	—		—		71		185,145		125,224
Total equity	969,065		724,025		584,177		275,712		307,741

Table of Contents


ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read this discussion together with the financial statements, related notes and other financial information included in this Annual Report on Form 10-K. The following discussion may contain predictions, estimates and other forward-looking statements that involve a number of risks and uncertainties, including those discussed under Item 1A—“Risk Factors” and elsewhere in this Annual Report on Form 10-K. These risks could cause our actual results to differ materially from any future performance suggested below.

Executive Overview

We are a global medical technology company that develops, manufactures and markets a variety of noninvasive monitoring technologies. Our mission is to improve patient outcomes and reduce the cost of care. We invented Masimo SET^®, which provides the capabilities of Measure-through Motion and Low Perfusion^® pulse oximetry to address the primary limitations of conventional pulse oximetry. Pulse oximetry is the noninvasive measurement of the oxygen saturation level of arterial blood, or the blood that delivers oxygen to the body’s tissues, and pulse rate. Pulse oximetry is one of the most common measurements made in and out of hospitals around the world. Masimo SET^® has been validated in over 100 independent clinical studies and is the only pulse oximetry technology we are aware of that has been proven to help clinicians detect critical congenital heart disease in newborns, reduce retinopathy of prematurity in neonates, and decrease intensive care unit transfers and rapid response activations on the general floor.

After introducing Masimo SET^®, we have continued to innovate by introducing noninvasive measurements beyond arterial blood oxygen saturation level (SpO₂) and pulse rate (PR), creating new market opportunities in both the hospital and non-hospital care settings. We believe our Masimo rainbow SET^™ platform, which utilizes Masimo SET^® and both licensed and proprietary rainbow^® technologies, includes the first devices cleared by the U.S. Food and Drug Administration (FDA) to noninvasively and continuously monitor multiple measurements that previously required invasive or complicated procedures. Following the introduction of our rainbow SET^™ platform, we introduced additional noninvasive measurements and technologies including SedLine^® brain function monitoring, NomoLine^® capnography and gas monitoring, and O3^® regional oximetry. Our current technology offerings also include Patient SafetyNet, Patient SafetyNet Surveillance, MyView^®, Replica^™ and Trace^™. Please see Part I, Item 1 of this Annual Report on Form 10-K for additional information related to our business, products and technologies.

Adoption of New Revenue Accounting Standard

Effective December 31, 2017, we adopted Financial Accounting Standards Board Accounting Standards Update (ASU) No. 2014-09, Revenue (Topic 606): Revenue from Contracts with Customers (ASU 2014-09). Our adoption of ASU 2014-09 generally resulted in (a) the acceleration of when we recognize certain revenue, and (b) the deferral of certain incremental costs associated with obtaining a customer contract. As indicated by the notation “as adjusted”, prior period amounts and disclosures set forth in this Annual Report on Form 10-K have been updated to comply with the full retrospective application of Accounting Standards Codification (ASC) Topic 606 (ASC 606). See Note 2 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information related to our adoption of this new accounting standard.

Tax Cuts and Jobs Act of 2017 (2017 Tax Act)

On December 22, 2017, the 2017 Tax Act was signed into law, and became effective January 1, 2018. The 2017 Tax Act included a number of changes to existing U.S. federal tax law impacting businesses including, among other things, a permanent reduction in the corporate income tax rate from 35% to 21%, a one-time transition tax on the “deemed repatriation” of cumulative undistributed foreign earnings as of December 31, 2017 and changes in the prospective taxation of the foreign operations of U.S. multinational companies. Given the complexity of the 2017 Tax Act, we made certain estimates and assumptions in connection with the calculation of our provision for income taxes for the year ended December 30, 2017 and recorded a discrete tax charge of approximately $37.0 million. In addition, as a result of this change in U.S. tax policy, we recorded a related discrete tax charge of $6.5 million as a result of our decision to repatriate up to $180.0 million of accumulated undistributed earnings from our foreign subsidiaries. During the year ended December 29, 2018, we recorded an adjustment of approximately $0.9 million in our tax provision to reduce our previous estimated accrual as the result of additional information and guidance that became available with respect to the application of certain provisions of the 2017 Tax Act. See Note 18 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information related to the impact of the 2017 Tax Act on our tax provision and tax rate.

Table of Contents

Settlement Agreement with Koninklijke Philips N.V. (Philips N.V.)

In November 2016, we entered into a settlement agreement with Philips N.V. (the Philips Settlement Agreement), pursuant to which Philips N.V. agreed to pay us $300 million, and Philips N.V. and its affiliates (collectively, the Philips Group) and us (collectively, the Parties) agreed to dismiss, with prejudice, all pending legal and contractual disputes between the Parties and agreed not to sue each other for patent infringement for certain of each other’s products. In addition, the Parties agreed to work together to integrate our technologies into additional Philips Group products, and to jointly develop certain other products. Each of the Parties has additional obligations to the other in the event that such party does not meet certain objectives under the settlement agreement. The Philips Settlement Agreement also contains rainbow^® parameter pricing and related terms. The Parties further agreed to undertake a joint marketing program to promote rainbow^® adoption with Philips Group products.

Stock Repurchase Programs

In July 2018, our Board approved a stock repurchase program authorizing us to purchase up to 5.0 million shares of our common stock over a period of up to three years (2018 Repurchase Program). The 2018 Repurchase Program may be carried out at the discretion of a committee comprised of our CEO and CFO through open market purchases, one or more Rule 10b5-1 trading plans, block trades and in privately negotiated transactions. For additional information regarding our current and prior stock repurchase programs, see Part II, Item 5 and Note 15 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K.

Cercacor

Cercacor is an independent entity spun off from Masimo to our stockholders in 1998. We are a party to a cross-licensing agreement with Cercacor, which was amended and restated effective January 1, 2007 (the Cross-Licensing Agreement), that governs each party’s rights to certain intellectual property held by the two companies. Joe Kiani, our Chairman and Chief Executive Officer, is also the Chairman and Chief Executive Officer of Cercacor. We have also entered into various other agreements with Cercacor, including an Administrative Services Agreement, a Consulting Services Agreement and a Sublease Agreement. For periods prior to January 3, 2016, Cercacor was consolidated as a variable interest entity within our financial statements. See Note 3 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information related to Cercacor.

Table of Contents

Results of Operations⁽¹⁾

The following table sets forth, for the periods indicated, our results of operations expressed as U.S. Dollar amounts and as a percentage of revenue.



	Year ended December 29, 2018					Year ended December 30, 2017 As Adjusted					Year ended December 31, 2016 As Adjusted
	Amount			% of Revenue		Amount			% of Revenue		Amount			% of Revenue
	(dollars in thousands)
Revenue:
Product	$	829,874		96.7	%	$	738,242		93.4	%	$	673,962		94.5	%
Royalty and other revenue	28,415			3.3		52,006			6.6		38,936			5.5
Total revenue	858,289			100.0		790,248			100.0		712,898			100.0
Cost of goods sold	283,397			33.0		268,216			33.9		234,560			32.9
Gross profit	574,892			67.0		522,032			66.1		478,338			67.1
Operating expenses:
Selling, general and administrative	289,456			33.7		276,292			35.0		254,707			35.7
Research and development	76,967			9.0		61,953			7.8		57,686			8.1
Litigation settlement, award and/or defense costs	425			—		—			—		(270,000		)	(37.9	)
Total operating expenses	366,848			42.7		338,245			42.8		42,393			5.9
Operating income	208,044			24.2		183,787			23.3		435,945			61.2
Non-operating (income) expense	(5,732		)	(0.7	)	(2,013		)	(0.3	)	2,429			0.3
Income before provision for income taxes	213,776			24.9		185,800			23.5		433,516			60.8
Provision for income taxes	20,233			2.4		61,011			7.7		122,419			17.2
Net income	$	193,543		22.5	%	$	124,789		15.8	%	$	311,097		43.6	%

Comparison of the Year ended December 29, 2018 to the Year ended December 30, 2017⁽¹⁾

Revenue. Total revenue increased $68.0 million, or 8.6%, to $858.3 million for the year ended December 29, 2018, from $790.2 million for the year ended December 30, 2017. The following table details our total product revenues by the geographic area to which the products were shipped for fiscal years 2018 and 2017 (dollars in thousands):



	Year ended December 29, 2018				Year ended December 30, 2017 As Adjusted				Increase/ (Decrease)			Percentage Change
United States	$	566,816	68.3	%	$	502,983	68.1	%	$	63,833		12.7	%
Europe, Middle East and Africa	160,910		19.4		138,689		18.8		22,221			16.0
Asia and Australia	75,534		9.1		72,434		9.8		3,100			4.3
North and South America (excluding United States)	26,614		3.2		24,136		3.3		2,478			10.3
Total product revenue	$	829,874	100.0	%	$	738,242	100.0	%	$	91,632		12.4	%
Royalty and other revenue	28,415				52,006				(23,591		)	(45.4	)%
Total revenue	$	858,289			$	790,248			$	68,041

______________


⁽¹⁾	Certain information presented for the periods ended December 30, 2017 and December 31, 2016 has been restated to reflect the full retrospective application of ASU 2014-09. See Note 2 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information related to our adoption of this new accounting standard.

Table of Contents

Product revenues increased $91.6 million, or 12.4%, to $829.9 million for the year ended December 29, 2018 from $738.2 million for the year ended December 30, 2017. This increase was primarily due to higher sales of our sensor products resulting from an increase in our installed base of circuit boards and monitors, an increase in sales of parameter licenses as well as higher sales of circuit boards, monitoring equipment and parameter licenses. Included in our product revenue growth was approximately $4.0 million of favorable foreign exchange rate movements from the prior year period that increased the U.S. Dollar translation of foreign sales that were denominated in various foreign currencies. During the year ended December 29, 2018, we shipped approximately 231,700 noninvasive technology boards and monitors, an increase of approximately 28,700 units, or 14.1%, from approximately 203,000 units shipped during the year ended December 30, 2017.

Product revenue generated through our direct and distribution sales channels increased $73.9 million, or 11.5%, to $718.6 million for the year ended December 29, 2018, compared to $644.7 million for the year ended December 30, 2017. Revenues from our OEM channel increased $17.7 million, or 18.9%, to $111.3 million for the year ended December 29, 2018 as compared to $93.6 million for the year ended December 30, 2017.

Royalty and other revenue consists primarily of royalties received from Medtronic plc (Medtronic, formerly Covidien Ltd.) related to its U.S. sales pursuant to the terms of settlement agreement, and revenue from non-recurring engineering (NRE) services for a certain OEM customer. For the year ended December 29, 2018, royalty and other revenue decreased $23.6 million, or 45.4%, to $28.4 million from $52.0 million for the year ended December 30, 2017, primarily due to the completion of the majority of our contracted NRE services in the prior year. In addition, Medtronic was no longer required to pay royalties to us after October 6, 2018. We currently do not expect to replace this royalty and NRE services revenue with similar revenue from other sources.

Gross Profit. Gross profit consists of total revenue less cost of goods sold. Our gross profit for fiscal years 2018 and 2017 was as follows (dollars in thousands):



	Gross Profit
	Year ended December 29, 2018		Percentage of Net Revenues		Year ended December 30, 2017 As Adjusted		Percentage of Net Revenues		Increase/ (Decrease)			Percentage Change
Product gross profit	$	547,188	65.9	%	$	473,647	64.2	%	$	73,541		15.5	%
Royalty and other revenue gross profit	27,704		97.5		48,385		93.0		(20,681		)	(42.7	)
Total gross profit	$	574,892	67.0	%	$	522,032	66.1	%	$	52,860		10.1	%

Cost of goods sold includes labor, material, overhead and other similar costs related to the production, supply, distribution and support of our products and the rendering of NRE services. Cost of goods sold increased $15.2 million to $283.4 million for the year ended December 29, 2018, from $268.2 million for the year ended December 30, 2017, primarily due to increased product revenue that was partially offset by improved manufacturing efficiencies and product cost reductions. Product gross margins increased to 65.9% for the year ended December 29, 2018 from 64.2% for the year ended December 30, 2017. This increase in product gross margin was primarily due to improved manufacturing efficiencies and product cost reductions. Royalty and other revenue gross profit decreased by $20.7 million for the year ended December 29, 2018 compared to the year ended December 30, 2017, primarily due to lower NRE service revenue in the current year.

Selling, General and Administrative. Selling, general and administrative expenses consist primarily of salaries and related expenses for sales, marketing and administrative personnel, sales commissions, advertising and promotion costs, professional fees related to legal, accounting and other outside services, public company costs and other corporate expenses. Selling, general and administrative expenses for fiscal years 2018 and 2017 were as follows (dollars in thousands):



Selling, General and Administrative
Year ended December 29, 2018	Percentage of Net Revenues	Year ended December 30, 2017 As Adjusted	Percentage of Net Revenues	Increase/ (Decrease)	Percentage Change
$289,456	33.7%	$276,292	35.0%	$13,164	4.8%

Table of Contents

Selling, general and administrative expenses increased $13.2 million, or 4.8%, to $289.5 million for the year ended December 29, 2018 from $276.3 million for the year ended December 30, 2017. This net increase was primarily attributable to higher payroll-related costs of approximately $24.8 million, higher GPO fees and third-party commission expenses of approximately $2.8 million and higher charitable donations of approximately $2.6 million. These increased expenses were partially offset by lower legal expenses of approximately $2.7 million and the non-recurrence of a net charge of approximately $10.5 million recorded during the year ended December 30, 2017 related to an arbitration proceeding that we initiated against a former appointed foreign agent, as well as a $2.0 million partial recovery against such charge during the year ended December 29, 2018. See Note 19 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information on the status of this arbitration proceeding.

Approximately $21.4 million and $13.3 million of stock-based compensation expense was included in selling, general and administrative expenses for the years ended December 29, 2018 and December 30, 2017, respectively. The increase in stock-based compensation expense during the year ended December 29, 2018 was due to both the composition of the equity awards granted and a significant increase in the fair market value of our stock from the prior year that increased the value of the equity awards granted during the year. See Note 16 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information on our stock-based compensation programs.

Research and Development. Research and development expenses consist primarily of salaries and related expenses for engineers and other personnel engaged in the design and development of our products. These expenses also include third-party fees paid to consultants, prototype and engineering supply expenses and the costs of clinical trials. Research and development expenses for fiscal years 2018 and 2017 were as follows (dollars in thousands):



Research and Development
Year ended December 29, 2018	Percentage of Net Revenues	Year ended December 30, 2017	Percentage of Net Revenues	Increase/ (Decrease)	Percentage Change
$76,967	9.0%	$61,953	7.8%	$15,014	24.2%

Research and development expenses increased $15.0 million, or 24.2%, to $77.0 million for the year ended December 29, 2018 from $62.0 million for the year ended December 30, 2017. This net increase was due primarily to increases in payroll-related costs of approximately $9.5 million, engineering project costs of approximately $0.8 million and occupancy-related costs of approximately $0.8 million, as well as $2.9 million less in allocations to cost of goods sold due to lower NRE service revenue.

Included in research and development expenses was approximately $5.7 million and $3.6 million of stock-based compensation expense for the years ended December 29, 2018 and December 30, 2017, respectively. The increase in stock-based compensation expense during the year ended December 29, 2018 was primarily due to the increase in the fair market value of our stock from the prior year that increased the value of the equity awards granted during the year. See Note 16 to our accompanying consolidated financial statements included in Part IV, Item 15(a) of this Annual Report on Form 10-K for additional information on our stock-based compensation programs.

Non-operating (Income) Expense. Non-operating (income) expense consists primarily of interest income, interest expense and foreign exchange losses. Non-operating income for fiscal years 2018 and 2017 was as follows (dollars in thousands):



Non-operating (income)
Year ended December 29, 2018	Percentage of Net Revenues	Year ended December 30, 2017	Percentage of Net Revenues	(Increase)/ Decrease	Percentage Change
$(5,732)	(0.7)%	$(2,013)	(0.3)%	$(3,719)	184.7%

Non-operating income was $5.7 million for the year ended December 29, 2018, as compared to $2.0 million of non-operating income for the year ended December 30, 2017. This net increase of approximately $3.7 million was primarily due to approximately $5.2 million in higher interest income. In addition, we recognized approximately $2.0 million of net realized and unrealized losses on foreign currency denominated transactions during the year ended December 29, 2018, as compared to $0.3 million of net realized and unrealized losses on foreign currency denominated transactions during the year ended December 30, 2017.

Table of Contents

Provision for Income Taxes. Our provision for income taxes for fiscal years 2018 and 2017 was as follows (dollars in thousands):



Provision for Income Taxes
Year ended December 29, 2018	Percentage of Net Revenues	Year ended December 30, 2017 As Adjusted	Percentage of Net Revenues	Increase/ (Decrease)	Percentage Change
$20