Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

x      ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year Ended December 31, 2013

or

o         TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from          to

Commission file number 1-10879

AMPHENOL CORPORATION

(Exact Name of Registrant as Specified in its Charter)

358 Hall Avenue, Wallingford, Connecticut 06492

203-265-8900

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes x  No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o  No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes x  No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in rule 12b-2 of the Act).  Yes o No x

The aggregate market value of Amphenol Corporation Class A Common Stock, $.001 par value, held by non-affiliates was approximately $11,033 million based on the reported last sale price of such stock on the New York Stock Exchange on June 30, 2013.

As of January 31, 2014, the total number of shares outstanding of Registrant’s Class A Common Stock was 158,199,518

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s definitive proxy statement, which is expected to be filed within 120 days following the end of the fiscal year covered by this report, are incorporated by reference into Part III hereof.

Table of Contents

1

Table of Contents

PART I

Item 1. Business

General

Amphenol Corporation (together with its subsidiaries, “Amphenol” or the “Company”) is one of the world’s largest designers, manufacturers and marketers of electrical, electronic and fiber optic connectors, interconnect systems, antennas, sensors and sensor- based products and coaxial and high-speed specialty cable. The Company was incorporated in 1987. Certain predecessor businesses, which now constitute part of the Company, have been in business since 1932.

The Company’s strategy is to provide its customers with comprehensive design capabilities, a broad selection of products and a high level of service on a world-wide basis while maintaining continuing programs of productivity improvement and cost control. The Company operates through two reporting segments: Interconnect Products and Assemblies and Cable Products and Solutions.  The Interconnect Product and Assemblies segment primarily designs, manufacturers and markets a broad range of connector and connector systems, value-add products and other products, including antennas and sensors, used in a broad range of applications in a diverse set of end markets.  Interconnect products include connectors, which when attached to an electrical, electronic or fiber optic cable, a printed circuit board or other device, facilitate transmission of power or signal.  Value-add systems generally consist of a system of cable, flexible circuits or printed circuit boards and connectors for linking electronic equipment.  The Cable Products and Solutions segment primarily designs, manufacturers and markets cable, value-added products and components for use primarily in the broadband communications and information technology markets as well as certain applications in other markets.

The table below provides a summary of our reporting segments, the fiscal 2013 net sales contribution of each segment, the primary industry and end markets that we service and our key products:

The Company, based on reports of industry analysts, estimates that the worldwide sales of interconnect products were approximately $50 billion in 2013. The Company believes that the worldwide industry for interconnect products and systems is highly

2

Table of Contents

fragmented, with over 2,000 producers of connectors and interconnect systems worldwide, of which the 10 largest, including Amphenol, accounted for a combined market share of approximately 64% in 2013.  The Company’s acquisition strategy is focused on the consolidation of this highly fragmented industry.  For a discussion of Company’s acquisition strategy, refer to the “Our Strategy” section of this report.

Information regarding our operations by reporting segment and the Company’s long-lived assets appears in Note 13 of the Notes to the Consolidated Financial Statements.

Our Strategy

The Company’s overall strategy is to provide its customers with comprehensive design capabilities, a broad selection of products and a high level of service on a worldwide basis while maintaining continuing programs of productivity improvement and cost control.  Specifically, our business strategy is as follows:

·                  Pursue broad diversification - The Company constantly drives to increase its diversity of markets, customers, applications and products.  Due to the tremendous variety of opportunities in the electronics industry, management believes that it is very important to ensure participation wherever significant growth opportunities are available.  This diversification positions us to proliferate our technologies across the broadest array of opportunities and reduces our exposure to any particular market, thereby reducing the variability of our financial performance.  An overview of the Company’s market and product participation is described under “Markets”.

·                  Develop performance-enhancing interconnect solutions - The Company seeks to expand the scope and number of its preferred supplier relationships.  The Company works closely with its customers at the design stage to create and manufacture innovative solutions.  These products generally have higher value-added content than other interconnect products and have been developed across all of the Company’s markets.  The Company has a particular focus on technology leadership in the interconnect areas of radio frequency, power, harsh environment, high-speed and fiber optics, as well as sensors, as it views these technology areas to be of particular importance to our global customer base.

·                  Expand global presence - The Company intends to further expand its global manufacturing, engineering, sales and service operations to better serve its existing customer base, penetrate developing markets and establish new customer relationships.  As the Company’s global customers expand their international operations to access developing world markets and lower manufacturing costs in certain regions, the Company is continuing to expand its international footprint in order to provide just-in-time capabilities to these customers.  The majority of the Company’s international operations have broad capabilities including new product development.  The Company is also able to take advantage of the lower manufacturing costs in some regions, and has established low-cost manufacturing and assembly facilities in the three major geographical markets of the Americas, Europe/Africa and Asia.

·                  Control costs - The Company recognizes the importance in today’s global marketplace of maintaining a competitive cost structure.  Innovation, product quality and comprehensive customer service are not mutually exclusive with controlling costs.  Controlling costs is part of a mindset.  It is having the discipline to invest in programs that have a good return, maintaining a cost structure as flexible as possible to respond to changes in the marketplace, dealing with suppliers and vendors in a fair but prudent way to ensure a reasonable cost for materials and services and creating a mindset of managers to manage the Company’s assets as if they were their own.

·                  Pursue strategic acquisitions and investments - The Company believes that the fragmented interconnect industry continues to provide significant opportunities for strategic acquisitions.  Accordingly, we continue to pursue acquisitions of high growth potential companies with strong management teams that complement our existing business while further expanding our product lines, technological capabilities and geographic presence.  Furthermore, we seek to enhance the performance of acquired companies by leveraging Amphenol’s business strategy and access to low-cost manufacturing around the world.  In 2013, the Company invested $485 million in five separate acquisitions in the automotive, industrial and commercial aerospace markets, which broadened and enhanced the Company’s customer base and product offerings in these markets.

·                  Foster collaborative, entrepreneurial management - Amphenol’s management system is designed to provide clear income statement and balance sheet responsibility in a flat organizational structure.  Each general manager is incented to grow and develop his or her business and to think entrepreneurially in providing innovative, timely and cost-effective solutions to customer needs.  In addition, Amphenol’s general managers have access to the resources of the larger organization and are encouraged to work collaboratively with other general managers to meet the needs of the expanding marketplace and to achieve common goals.

3

Table of Contents

Markets

The Company sells products to customers in a diversified set of end markets.

Automotive - Amphenol is a leading supplier of advanced interconnect systems and sensors for a growing array of automotive applications.  In addition, Amphenol has developed advanced technology solutions for hybrid-electric vehicles and is working with the leading global customers to proliferate these advanced interconnect products into next-generation automobiles.  Sales into the automotive market represented approximately 12% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

·                  engine management and control

·                  exhaust monitoring and cleaning

·                  hybrid-electric vehicles

·                  infotainment and communications

·                  lighting

·                  safety and security systems

·                  telematics systems

Broadband Communications - Amphenol is a world leader in broadband communication products for the cable, satellite and telco video and data networks, with industry-leading engineering, design and manufacturing expertise. The Company offers a broad range of products to service the broadband market, from customer premises cables and interconnect devices to distribution cable and fiber optic components.  Sales into the broadband communications market represented approximately 8% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

·                  cable modems

·                  cable, satellite and telco networks

·                  high-speed internet hardware

·                  network switching equipment

·                  satellite interface devices

·                  set top boxes

Commercial Aerospace - Amphenol is a leading provider of high-performance interconnect systems and components to the rapidly expanding commercial aerospace market.  In addition to connector and assembly products, the Company also provides high technology cable management products.  All of Amphenol’s products are specifically designed to operate in the harsh environments of commercial aerospace while also providing substantial weight reduction, simplified installation and minimal maintenance procedures.  Sales into the commercial aerospace market represented approximately 6% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

·                  aircraft and airframe power distribution

·                  avionics

·                  controls and instrumentation

·                  engines

·                  in-flight entertainment

·                  lighting and control systems

·                  wire bundling and cable management

Industrial - Amphenol is a technology leader in the design, manufacture and supply of high-performance interconnect systems and sensors for a broad range of industrial applications.  Amphenol’s core competencies include application-specific industrial interconnect solutions utilizing integrated assemblies, including with both cable and flexible printed circuits, as well as high-power interconnects requiring advanced engineering and system integration.  In particular, our innovative solutions facilitate the increasing demands of embedded computing and power distribution.  Sales into the industrial market represented approximately 14% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

·                  alternative and traditional energy generation

·                  factory and machine tool automation

·                  geophysical

·                  heavy equipment

·                  instrumentation

·                  LED lighting

·                  marine

·                  medical equipment

·                  rail mass transit

Information Technology and Data Communications - Amphenol is a global provider of interconnect solutions to designers and manufacturers of internet-enabling systems.  With our industry-leading high speed, power and fiber optic technologies, together with superior simulation and testing capability and cost effectiveness, Amphenol leads the way in interconnect development for the information technology (“IT”) and datacom market. Whether industry standard or application-specific designs are required, Amphenol provides customers with products that enable performance at the leading edge of next-generation, high-speed technology.  Sales into the IT and datacom market represented approximately 19% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

·                  internet appliances

·                  optical and copper networking equipment

·                  servers

·                  storage systems

4

Table of Contents

Military - Amphenol is a world leader in the design, manufacture and supply of high-performance interconnect systems for harsh environment military applications. Such products require superior performance and reliability under conditions of stress and in hostile environments such as rapid and severe temperature changes, vibration, pressure, humidity and nuclear radiation.  Amphenol provides an unparalleled product breadth, from military specification connectors to customized high-speed board level interconnects; from flexible to rigid printed circuit boards; from backplane systems to completely integrated assemblies.  Amphenol is a technology leader, participating in all major programs from the earliest inception across each phase of the production cycle.  Sales into the military market represented approximately 12% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

Mobile Devices - Amphenol designs and manufactures an extensive range of interconnect products, antennas and electromechanical components found in a wide array of mobile computing devices.  Amphenol’s capability for high-volume production of these technically demanding, miniaturized products, combined with our speed of new product introduction, are critical drivers of the Company’s long-term success in this market.  Sales into the mobile devices market represented approximately 19% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

Mobile Networks - Amphenol is a leading global interconnect solutions provider to the mobile networks market.  The Company offers a wide product portfolio supporting virtually every wireless communications standard, including 3G, 3.5G, 4G, WiMAX, LTE, TD-LTE and other future IP-based solutions.  In addition, the Company works with service providers around the world to offer an array of antennas and installation-related site solution products.  Sales into the mobile networks market represented approximately 10% of the Company’s consolidated net sales in 2013 with sales into the following primary end applications:

Customers and Geographies

The Company manufactures and sells a broad portfolio of products on a global basis to customers in various industries. Our customers include many of the leaders in their respective industries, and our relationships with them typically date back many years. We believe that this diversified customer base provides us an opportunity to leverage our skills and experience across markets and reduces our exposure to particular end markets.  Additionally, we believe that the diversity of our customer base is an important strength of the Company.

There has been a trend on the part of original equipment manufacturer (“OEM”) customers to consolidate their lists of qualified suppliers to companies that have a broad portfolio of leading technology solutions, design capability, global presence, and the ability to meet quality and delivery standards while maintaining competitive prices.  The Company has positioned its global resources to compete effectively in this environment.  As an industry leader, the Company has established close working relationships with many of its customers on a global basis. These relationships allow the Company to better anticipate and respond to customer needs when designing new products and new technical solutions. By working with customers in developing new products and technologies, the Company is able to identify and act on trends and leverage knowledge about next-generation technology across our products.  In addition, the Company has concentrated its efforts on service, procurement and manufacturing improvements focused on increasing product quality and lowering product lead-time and cost.  For a discussion of risks related to the Company’s foreign operations, see the risk factor titled “The Company is subject to the risks of political, economic and military instability in countries outside the United States” in Part I, Item 1A herein.

The Company’s products are sold to thousands of OEMs in approximately 70 countries throughout the world. The Company also sells certain products to electronic manufacturing services (“EMS”) companies, to original design manufacturers (“ODMs”) and to communication network operators.  No single customer accounted for more than 10% of the Company’s consolidated net sales for the years ended December 31, 2013, 2012 or 2011.

5

Table of Contents

The Company sells its products through its own global sales force, independent representatives and a global network of electronics distributors. The Company’s sales to distributors represented approximately 13% of the Company’s consolidated net 2013 sales.  In addition to product design teams and customer collaboration arrangements, the Company uses key account managers to manage customer relationships on a global basis such that it can bring to bear its total resources to meet the worldwide needs of its multinational customers.

Manufacturing

The Company is a global manufacturer employing advanced manufacturing processes including molding, stamping, plating, turning, extruding, die casting and assembly operations as well as proprietary process technology for specialty and coaxial cable production. Outsourcing of certain fabrication processes is used when cost-effective. Substantially all of the Company’s manufacturing facilities are certified to the ISO9000 series of quality standards, and many of the Company’s manufacturing facilities are certified to other quality standards, including QS9000, ISO14000, TS16949 and TS16469.

The Company’s manufacturing facilities are generally vertically integrated operations from the initial design stage through final design and manufacturing.  The Company has an established manufacturing presence in over 30 countries. Our global coverage positions us near our customers’ locations and allows us to assist them in consolidating their supply base and lowering their production costs. We believe our balanced geographic distribution lowers our exposure to any particular geography.  The Company designs, manufactures and assembles its products at facilities in the Americas, Europe, Asia, Australia and Africa.  The Company believes that its global presence is an important competitive advantage, as it allows the Company to provide quality products on a timely and worldwide basis to its multinational customers.

The Company employs a global manufacturing strategy to lower its production costs and to improve service to customers. The Company’s strategy is to maintain strong cost controls in its manufacturing and assembly operations. The Company is continually evaluating and adjusting its expense levels and workforce to reflect current business conditions and maximize the return on capital investments.  The Company sources its products on a worldwide basis.  To better serve certain high volume customers, the Company has established just-in-time facilities near these major customers.  The Company’s international manufacturing and assembly facilities generally serve the respective local markets and coordinate product design and manufacturing responsibility with the Company’s other operations around the world.  The Company has lower cost manufacturing and assembly facilities in China, Malaysia, Mexico, India, Eastern Europe and North Africa to serve regional and world markets.  For a discussion of risks attendant to the Company’s foreign operations, see the risk factor titled “The Company is subject to the risks of political, economic and military instability in countries outside the United States” in Part I, Item 1A herein.

Net sales by geographic region as an approximate percent of our total consolidated net sales were as follows:

Net sales by geographic area are based on the customer location to which the product is shipped.

Research and Development

The Company generally implements its product development strategy through product design teams and collaboration arrangements with customers, which result in the Company obtaining approved vendor status for its customers’ new products and programs.  The Company focuses its research and development efforts primarily on those product areas that it believes have the potential for broad market applications and significant sales within a one to three year period.  The Company seeks to have its products become widely accepted within the industry for similar applications and products manufactured by other potential customers, which the Company believes will provide additional sources of future revenue.  By developing application specific products, the Company has decreased its exposure to standard products, which generally experience greater pricing pressure.

Our research, development, and engineering efforts are supported by approximately 1,500 engineers and are performed primarily by individual operating units focused on specific markets and technologies.  The Company’s research and development expense for the creation of new and improved products and processes was $103.4 million, $92.5 million and $88.9 million for 2013, 2012 and 2011, respectively.

6

Table of Contents

Intellectual Property

Patents and other proprietary rights are important to our business. We also rely upon trade secrets, manufacturing know-how, continuing technological innovations, and licensing opportunities to maintain and improve our competitive position. We review third-party proprietary rights, including patents and patent applications, as available, in an effort to develop an effective intellectual property strategy, avoid infringement of third-party proprietary rights, identify licensing opportunities, and monitor the intellectual property claims of others.

We own a large portfolio of patents that principally relate to electrical, optical, electronic and sensor products. We also own a portfolio of trademarks and are a licensee of various patents and trademarks. Patents for individual products extend for varying periods according to the date of patent filing or grant and the legal term of patents in the various countries where patent protection is obtained. Trademark rights may potentially extend for longer periods of time and are dependent upon national laws and use of the trademarks.

While we consider our patents and trademarks to be valued assets, we do not believe that our competitive position or our operations are dependent upon or would be materially impacted by the loss of any single patent or group of related patents.

Raw Materials

The Company purchases a wide variety of raw materials for the manufacture of its products, including precious metals such as gold and silver used in plating, aluminum, brass, steel, copper and bimetallic products used for cable, contacts and connector shells, and plastic materials used for cable and connector bodies and inserts. Such raw materials are generally available throughout the world and are purchased locally from a variety of suppliers. The Company is generally not dependent upon any one source for raw materials, or if one source is used the Company attempts to protect itself through long-term supply agreements.  Information regarding our purchasing obligations related to commitments to purchase certain goods and services is disclosed in Note 16 of the Notes to the Consolidated Financial Statements.

Competition

The Company encounters competition in substantially all areas of its business. The Company competes primarily on the basis of technology innovation, product quality, price, customer service and delivery time.  Competitors within the Interconnect Products and Assemblies segment include TE Connectivity, Molex, Yazaki, Foxconn, FCI, JST, Delphi, Hirose and JAE, among others. The primary competitor within the Cable Products and Solutions segment is Commscope, among others.  In addition, the Company competes with a large number of smaller companies who compete in specific geographies, markets or products.

Backlog

The Company estimates that its backlog of unfilled orders as of December 31, 2013 was approximately $1,032 million compared with backlog of approximately $800 million as of December 31, 2012.  Orders typically fluctuate from quarter to quarter based on customer demand and general business conditions. Unfilled orders may generally be cancelled prior to shipment of goods. It is expected that all or a substantial portion of the backlog will be filled within the next 12 months. Significant elements of the Company’s business, such as sales to the communications related markets (including wireless communications, information technology and data communications) and broadband communications and sales to distributors, generally have short lead times. Therefore, backlog may not be indicative of future demand.

Employees

As of December 31, 2013, the Company had approximately 44,500 employees worldwide, of which approximately 35,000 were located in lower cost regions. Of these employees, approximately 36,900 were hourly employees and the remainder were salaried employees. The Company believes that it has a good relationship with its unionized and non-unionized employees.

Environmental Matters

Certain operations of the Company are subject to environmental laws and regulations which govern the discharge of pollutants into the air and water, as well as the handling and disposal of solid and hazardous wastes. The Company believes that its operations are currently in substantial compliance with applicable environmental laws and regulations and that the costs of continuing compliance will not have a material effect on the Company’s financial condition, results of operations or cash flows.

Owners and occupiers of sites containing hazardous substances, as well as generators of hazardous substances, are subject to broad liability under various environmental laws and regulations, including expenditures for cleanup and monitoring costs and

7

Table of Contents

potential damages arising out of past disposal activities. Such liability in many cases may be imposed regardless of fault or the legality of the original disposal activity. The Company has performed remediation activities and is currently performing operations and maintenance and monitoring activities at three off-site disposal sites previously utilized by the Company’s facility in Sidney, New York, and others - the Richardson Hill Road landfill, the Route 8 landfill and the Sidney landfill.  Actions at the Richardson Hill Road and Sidney landfills were undertaken subsequent to designation as “Superfund” sites on the National Priorities List under the Comprehensive Environmental Response, Compensation and Liability Act of 1980. The Route 8 landfill was designated as a New York State Inactive Hazardous Waste Disposal Site, with remedial actions taken pursuant to Chapter 6, Section 375-1 of the New York Code of Rules and Regulations. In addition, the Company is currently performing monitoring activities at, and in proximity to, its manufacturing site in Sidney, New York. The Company is also engaged in remediating or monitoring environmental conditions at certain of its other manufacturing facilities and has been named as a potentially responsible party for cleanup costs at other off-site disposal sites.

Subsequent to the acquisition of Amphenol Corporation from Allied Signal Corporation (“Allied Signal”) in 1987 (Allied Signal merged with Honeywell International Inc. in December 1999 (“Honeywell”)), the Company and Honeywell were named jointly and severally liable as potentially responsible parties in connection with several environmental cleanup sites. The Company and Honeywell jointly consented to perform certain investigations and remediation and monitoring activities at the Route 8 landfill and the Richardson Hill Road landfill, and they were jointly ordered to perform work at the Sidney landfill, all as referred to above. All of the costs incurred relating to these three sites are currently reimbursed by Honeywell based on an agreement (the “Honeywell Agreement”) entered into in connection with the acquisition in 1987. The environmental investigation, remediation and monitoring activities identified by the Company, including those referred to above, are covered under the Honeywell Agreement.  Management does not believe that the costs associated with resolution of these or any other environmental matters will have a material effect on the Company’s consolidated financial condition, results of operations or cash flows.

Since 1987, the Company has not been identified or named as a potentially responsible party with respect to any other significant on-site or off-site hazardous waste matters. In addition, the Company believes that its manufacturing activities and disposal practices since 1987 have been in material compliance with applicable environmental laws and regulations. Nonetheless, it is possible that the Company will be named as a potentially responsible party in the future with respect to additional Superfund or other sites. Although the Company is unable to predict with any reasonable certainty the extent of its ultimate liability with respect to any pending or future environmental matters, the Company believes, based upon information currently known by management about the Company’s manufacturing activities, disposal practices and estimates of liability with respect to known environmental matters, that any such liability will not have a material effect on the Company’s consolidated financial condition, results of operations or cash flows.

Other

The Company’s annual report on Form 10-K and all of the Company’s other filings with the Securities and Exchange Commission (“SEC”) are available to view, without charge, on the Company’s web site, www.amphenol.com, as soon as reasonably practicable after they are filed electronically with the SEC. Copies are also available without charge, from Amphenol Corporation, Investor Relations, 358 Hall Avenue, Wallingford, CT 06492.

Cautionary Information for Purposes of Forward Looking Statements

Statements made by the Company in written or oral form to various persons, including statements made in this annual report on Form 10-K and other filings with the SEC, that are not strictly historical facts are “forward looking” statements. Such statements should be considered as subject to uncertainties that exist in the Company’s operations and business environment. Certain of the risk factors, assumptions or uncertainties that could cause the Company to fail to conform with expectations and predictions are described below under the caption “Risk Factors” in Part I, Item IA and elsewhere in this annual report on Form 10-K.  Should one or more of these risks or uncertainties occur, or should the Company’s assumptions prove incorrect, actual results may vary materially from those described in this annual report on Form 10-K as anticipated, believed, estimated or expected.  We do not intend to update these forward looking statements.

Item 1A. Risk Factors

Investors should carefully consider the risks described below and all other information in this annual report on Form 10-K. The risks and uncertainties described below are not the only ones facing the Company. Additional risks and uncertainties not presently known to the Company or that it currently deems immaterial may also impair the Company’s business and operations.

If actions taken by management to limit, monitor or control financial enterprise risk exposures are not successful, the Company’s business and consolidated financial statements could be materially adversely affected. In such case, the trading price of the Company’s common stock could decline and investors may lose all or part of their investment.

8

Table of Contents

The Company is dependent on the communications industry, including information technology and data communications, wireless communications and broadband communications.

Approximately 56% of the Company’s 2013 net sales came from sales to the communications industry, including information technology and data communication, wireless communications and broadband communications of which 19% of the Company’s 2013 net sales came from sales to the mobile device market. Demand for these products is subject to rapid technological change (see below—“The Company is dependent on the acceptance of new product introductions for continued revenue growth”). These markets are dominated by several large manufacturers and operators who regularly exert significant price pressure on their suppliers, including the Company. There can be no assurance that the Company will be able to continue to compete successfully in the communications industry, and the Company’s failure to do so could have an adverse effect on the Company’s financial condition and results of operations.

Approximately 8% and 10% of the Company’s 2013 net sales came from sales to the broadband communications and mobile networks markets, respectively.  Demand for the Company’s products in these markets depends primarily on capital spending by operators for constructing, rebuilding or upgrading their systems. The amount of this capital spending and, therefore, the Company’s sales and profitability will be affected by a variety of factors, including general economic conditions, consolidation within the communications industry, the financial condition of operators and their access to financing, competition, technological developments, new legislation and regulation of operators. There can be no assurance that existing levels of capital spending will continue or that spending will not decrease.

Changes in defense expenditures may reduce the Company’s sales.

Approximately 12% of the Company’s 2013 net sales came from sales to the military market. The Company participates in a broad spectrum of defense programs and believes that no one program accounted for more than 1% of its 2013 net sales. The substantial majority of these sales are related to both U.S. and foreign military and defense programs. The Company’s sales are generally to contractors and subcontractors of the U.S. or foreign governments or to distributors that in turn sell to the contractors and subcontractors. Accordingly, the Company’s sales are affected by changes in the defense budgets of the U.S. and foreign governments. A significant decline in U.S. defense expenditures and foreign government defense expenditures generally could adversely affect the Company’s business and have an adverse effect on the Company’s financial condition and results of operations.

The Company encounters competition in substantially all areas of its business.

The Company competes primarily on the basis of technology innovation, product quality, price, customer service and delivery time. Competitors include large, diversified companies, some of which have substantially greater assets and financial resources than the Company, as well as medium to small companies. There can be no assurance that additional competitors will not enter the Company’s existing markets, nor can there be any assurance that the Company will be able to compete successfully against existing or new competition, and the inability to do so could have an adverse effect on the Company’s business, financial condition and results of operations.

The Company is dependent on the acceptance of new product introductions for continued revenue growth.

The Company estimates that products introduced in the last two years accounted for approximately 20% of 2013 net sales. The Company’s long-term results of operations depend substantially upon its ability to continue to conceive, design, source and market new products and upon continuing market acceptance of its existing and future product lines. In the ordinary course of business, the Company continually develops or creates new product line concepts. If the Company fails to or is significantly delayed in introducing new product line concepts or if the Company’s new products do not meet with market acceptance, its business, financial condition and results of operations may be adversely affected.

Covenants in the Company’s credit agreements may adversely affect the Company.

The Credit Agreement, amended on July 1, 2013, among the Company, certain subsidiaries of the Company and a syndicate of financial institutions (the “Revolving Credit Facility”) contains financial and other covenants, such as a limit on the ratio of debt to earnings before interest, taxes, depreciation and amortization, a limit on priority indebtedness and limits on incurrence of liens. Although the Company believes none of these covenants is presently restrictive to the Company’s operations, the ability to meet the financial covenants can be affected by events beyond the Company’s control, and the Company cannot provide assurance that it will meet those tests. A breach of any of these covenants could result in a default under the Revolving Credit Facility. Upon the occurrence of an event of default under any of the Company’s credit facilities, the lenders could elect to declare amounts outstanding thereunder to be immediately due and payable and terminate all commitments to extend further credit. If the lenders accelerate the repayment of borrowings, the Company may not have sufficient assets to repay the Revolving Credit Facility and other indebtedness.

9

Table of Contents

Downgrades of the Company’s debt rating could adversely affect the Company’s results of operations and financial condition.

If the credit rating agencies that rate the Company’s debt were to downgrade the Company’s credit rating in conjunction with a deterioration of the Company’s performance, it may increase the Company’s cost of capital and make it more difficult for the Company to obtain new financing, which could adversely affect the Company’s business.

The Company’s results may be negatively affected by changing interest rates.

The Company is subject to market risk from exposure to changes in interest rates based on the Company’s financing activities. As of December 31, 2013, $1,034.1 million, or 48% of the Company’s outstanding borrowings, were subject to floating interest rates, primarily LIBOR.  The Company has $600.0 million of unsecured Senior Notes due November 2014 outstanding, which were issued at 99.813% of their face value and which have a fixed interest rate of 4.75% (the “4.75% Senior Notes”).  The Company has $500.0 million of unsecured Senior Notes due February 2022 outstanding, which were issued at 99.746% of their face value and which have a fixed interest rate of 4.00% (the “4.00% Senior Notes”).  Additionally, in January 2014 the Company issued $750.0 million of unsecured Senior Notes due January 2019 which were issued at 99.846% of their face value and have a fixed interest rate of 2.55% (the “2.55% Senior Notes”).  The Company used the net proceeds from the sale of the 2.55% Senior Notes to repay borrowings under the Company’s Revolving Credit Facility, which reduced the Company’s interest rate exposure.

A 10% change in LIBOR at December 31, 2013 would have no material effect on the Company’s interest expense. The Company does not expect changes in interest rates to have a material effect on income or cash flows in 2014, although there can be no assurances that interest rates will not significantly change.

The Company’s results may be negatively affected by foreign currency exchange rates.

The Company conducts business in many international currencies through its worldwide operations, and as a result is subject to foreign exchange exposure due to changes in exchange rates of the various currencies. Changes in exchange rates can positively or negatively affect the Company’s sales, gross margins and equity. The Company attempts to minimize currency exposure risk in a number of ways including producing its products in the same country or region in which the products are sold, thereby generating revenues and incurring expenses in the same currency, cost reduction and pricing actions, and working capital management.  However, there can be no assurance that these actions will be fully effective in managing currency risk, especially in the event of a significant and sudden decline in the value of any of the international currencies of the Company’s worldwide operations, which could have an adverse effect on the Company’s results of operations and financial conditions.

The Company is subject to the risks of political, economic and military instability in countries outside the United States, including China.

Non-U.S. markets account for a substantial portion of the Company’s business.  During 2013, non-U.S. markets constituted approximately 69% of the Company’s net sales, with China constituting approximately 27% of the Company’s net sales. The Company employs more than 88% of its workforce outside the United States. The Company’s customers are located throughout the world and it has many manufacturing, administrative and sales facilities outside the United States. Because the Company has extensive non-U.S. operations as well as significant cash and cash investments held at institutions located outside of the U.S., it is exposed to risks that could negatively affect sales, profitability or the liquidity of such cash and cash investments including:

·                  tariffs, trade barriers and trade disputes;

·                  regulations related to customs and import/export matters;

·                  longer payment cycles;

·                  tax issues, such as tax law changes, examinations by taxing authorities, variations in tax laws from country to country as compared to the U.S. and difficulties in repatriating cash generated or held abroad in a tax-efficient manner;

·                  challenges in collecting accounts receivable;

·                  employment regulations and local labor conditions;

·                  difficulties protecting intellectual property;

·                  instability in economic or political conditions, including inflation, recession and actual or anticipated military or political conflicts; and

·                  the impact of each of the foregoing on outsourcing and procurement arrangements.

10

Table of Contents

The Company may experience difficulties and unanticipated expense of assimilating newly acquired businesses, including the potential for the impairment of goodwill.

The Company has completed a number of acquisitions in the past few years and anticipates that it will continue to pursue acquisition opportunities as part of its growth strategy.  The Company may experience difficulty and unanticipated expense in integrating such acquisitions and the acquisitions may not perform as expected. At December 31, 2013, the total assets of the Company were $6,168.0 million, which included $2,289.1 million of goodwill (the excess of fair value of consideration paid over the fair value of net identifiable assets of businesses acquired). The Company performs annual evaluations for the potential impairment of the carrying value of goodwill. Such evaluations have not resulted in the need to recognize an impairment. However, if the financial performance of the Company’s businesses were to decline significantly, the Company could incur a material non-cash charge to its income statement for the impairment of goodwill.

The Company may experience difficulties in obtaining a consistent supply of materials at stable pricing levels, which could adversely affect its results of operations.

The Company uses basic materials like aluminum, brass, copper, bi-metallic products, gold, plastic resins, silver and steel in its manufacturing processes. Volatility in the prices of such material and availability of supply may have a substantial impact on the price the Company pays for such materials. In addition, to the extent such cost increases cannot be recovered through sales price increases or productivity improvements, the Company’s margin may decline.

The Company may not be able to attract and retain key employees.

The Company’s continued success depends upon its continued ability to hire and retain key employees at its operations around the world. Any difficulties in obtaining or retaining the management and other human resource competencies that the Company needs to achieve its business objectives may have an adverse effect on the Company’s performance.

Changes in general economic conditions and other factors beyond the Company’s control may adversely impact its business.

The following factors could adversely impact the Company’s business:

·                  A global economic slowdown in any of the Company’s market segments;

·                  The effects of significant changes in monetary and fiscal policies in the U.S. and abroad including significant income tax changes, currency fluctuations and unforeseen inflationary pressures;

·                  Rapid material escalation of the cost of regulatory compliance and litigation;

·                  Unexpected government policies and regulations affecting the Company or its significant customers;

·                  Unforeseen intergovernmental conflicts or actions, including but not limited to armed conflict and trade wars;

·                  Unforeseen interruptions to the Company’s business with its largest customers, distributors and suppliers resulting from but not limited to, strikes, financial instabilities, computer malfunctions, inventory excesses or natural disasters;

·                  Increases in employment costs, particularly in low-cost regions in which the Company currently operates; and

·                  Changes in assumptions, such as discount rates and lower than expected investment performance related to the Company’s benefit plans.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

The Company’s fixed assets include plants and warehouses and a substantial quantity of machinery and equipment, most of which is general purpose machinery and equipment using tools and fixtures and in many instances having automatic control features and special adaptations. The Company’s plants, warehouses, machinery and equipment are in good operating condition, are well maintained and substantially all of its facilities are in regular use. The Company considers the present level of fixed assets along with planned capital expenditures as suitable and adequate for operations in the current business environment. At December 31, 2013, the Company operated a total of 300 plants, warehouses and offices of which (a) the locations in the U.S. had approximately 2.8 million square feet, of which 1.3 million square feet were leased; (b) the locations outside the U.S. had approximately 8.9 million square feet, of which 6.5 million square feet were leased; and (c) the square footage by segment was approximately 10.8 million square feet and 0.9 million square feet for the Interconnect Products and Assemblies segment and the Cable Products and Solutions segment, respectively.

11

Table of Contents

The Company believes that its facilities are suitable and adequate for the business conducted therein and are being appropriately utilized for their intended purposes. Utilization of the facilities varies based on demand for the products. The Company continuously reviews its anticipated requirements for facilities and, based on that review, may from time to time acquire or lease additional facilities and/or dispose of existing facilities.

Item 3. Legal Proceedings

The Company and its subsidiaries have been named as defendants in several legal actions in which various amounts are claimed arising from normal business activities. Although the amount of any ultimate liability with respect to such matters cannot be precisely determined, in the opinion of management, such matters are not expected to have a material effect on the Company’s financial condition or results of operations.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company effected the initial public offering of its Class A Common Stock in November 1991. The Company’s common stock has been listed on the New York Stock Exchange since that time under the symbol “APH.” The following table sets forth on a per share basis the high and low sales prices for the common stock for both 2013 and 2012 as reported on the New York Stock Exchange.

The below graph compares the performance of Amphenol over a period of five years ending December 31, 2013 with the performance of the Standard & Poor’s 500 Stock Index, the Dow Jones U.S. Electrical Components and Equipment (“DJUSEC”) Index and the average performance of a composite peer group as described below.

The Company is using the DJUSEC Index to replace the composite peer group index that was used in 2012.   The corporations comprising the composite peer group are TE Connectivity, Hubbell Incorporated, Methode Electronics, Inc., and Molex, Inc.  On December 9, 2013, Molex, Inc. ceased to be publicly traded.  Accordingly, for purposes of preserving the prior year index, we included Molex through November 29, 2013.  Over the past two years, two corporations within the Company’s historical composite peer group have ceased being publicly traded, leaving only three competitors in the peer group.  The Company believes that the numerous and diversified companies represented by the DJUSEC Index provide a more meaningful comparison.

Total Daily Compounded Return indices reflect reinvested dividends and are weighted on a market capitalization basis at the time of each reported data point.  The comparisons in the graph below are based upon historical data and are not indicative of, nor intended to forecast future performance.

12

Table of Contents

As of January 31, 2014, there were 39 holders of record of the Company’s common stock. A significant number of outstanding shares of common stock are registered in the name of only one holder, which is a nominee of The Depository Trust Company, a securities depository for banks and brokerage firms. The Company believes that there are a significant number of beneficial owners of its common stock.

Contingent upon declaration by the Board of Directors, the Company generally pays a quarterly dividend on its common stock. In July 2013, the Board of Directors approved an increase in the quarterly dividend from $0.105 per share to $0.20 per share effective with the third quarter 2013 dividend.  Total dividends declared during 2013, 2012 and 2011 were $96.8 million, $67.7 million and $10.1 million, respectively. Total dividends paid in 2013, 2012 and 2011 were $96.8 million, $70.1 million and $10.3 million, respectively, including those declared in the prior year and paid in the current year.  The Company intends to retain the remainder of its earnings not used for dividend payments to provide funds for the operation and expansion of the Company’s business (including acquisition-related activity), to repurchase shares of its common stock and to repay outstanding indebtedness.

The Company’s Revolving Credit Facility, amended July 1, 2013, contains financial covenants and restrictions, some of which may limit the Company’s ability to pay dividends, and any future indebtedness that the Company may incur could limit its ability to pay dividends.

The following table summarizes the Company’s equity compensation plan information as of December 31, 2013.

Repurchase of Equity Securities

In January 2013, the Company’s Board of Directors authorized a stock repurchase program under which the Company may repurchase up to 10 million shares of its common stock during the two year period ending January 31, 2015 (the “2013 Stock

13

Table of Contents

Repurchase Program”). The price and timing of any such purchases under the 2013 Stock Repurchase Program after December 31, 2013 will depend on factors such as levels of cash generation from operations, the volume of stock option exercises by employees, cash requirements for acquisitions, economic and market conditions and stock price.  During the twelve months ended December 31, 2013, the Company repurchased approximately 4.3 million shares of its common stock for approximately $324.7 million.  These treasury shares have been or will be retired by the Company and common stock and accumulated earnings were reduced accordingly.  Through February 15, 2014, the Company has repurchased an additional 1.4 million shares of its common stock for $120.3 million.  At February 15, 2014, approximately 4.3 million additional shares of common stock may be repurchased under the 2013 Stock Repurchase Program.

14

Table of Contents

Item 6.  Selected Financial Data

(dollars in thousands, except share and per share data)

(1)         Includes (a) acquisition-related expenses of $6.0 million, $4.6 million after tax, or $0.02 per share, relating to 2013 acquisitions, (b) $3.6 million, or $0.02 per share, income tax benefit due primarily to the favorable completion of prior year audits, and (c) an income tax benefit of $11.3 million, or $0.07 per share, resulting from the delay, by the U.S. government, in the reinstatement of certain federal income tax provisions for the year 2012 relating primarily to research and development credits and certain U.S. taxes on foreign income.  Such tax provisions were reinstated on January 2, 2013 with retroactive effect to 2012.  Under U.S. GAAP, the benefit to the Company of $11.3 million, or $0.07 per share, relating to the 2012 tax year was recorded as a benefit in the first quarter of 2013 at the date of reinstatement.  Net income per common share-diluted for the year ended December 31, 2013, excluding the effects of these items is $3.85.

(2)         Includes (a) acquisition-related expenses of $2.0 million, $2.0 million after tax, or $0.01 per share, relating to 2012 acquisitions and (b) income tax costs of $11.3 million, or $0.07 per share, relating to a delay, by the U.S. government, in the reinstatement of certain federal income tax provisions for the year 2012 relating primarily to research and development credits and certain U.S. taxes on foreign income.  Such tax provisions were reinstated on January 2, 2013 with retroactive effect to 2012.  Net income per common share-diluted for the year ended December 31, 2012, excluding the effects of these items is $3.47.

(3)         Includes (a) a tax benefit related to reserve adjustments from the favorable settlement of certain international tax positions and the completion of prior year audits of $4.5 million, or $0.03 per share, (b) a contingent payment adjustment of approximately $17.8 million, $11.2 million after tax, or $0.06 per share, (c) a charge for expenses incurred in connection with a flood at the Company’s Sidney, New York facility of $21.5 million, $13.6 million after tax, or $0.08 per share and (d) acquisition-related expenses of $2.0 million, $1.8 million after tax, or $0.01 per share, relating to 2011 acquisitions.  Net income per common share-diluted for the year ended December 31, 2011, excluding the effects of these items is $3.05.

(4)         Includes a tax benefit related to reserve adjustments from the favorable settlement of certain international tax positions and the completion of prior year audits of $20.7 million, or $0.12 per share.  Net income per common share-diluted for the year ended December 31, 2010, excluding the effect of this item is $2.70.

(5)         Includes (a) a charge for expenses incurred in the early extinguishment of interest rate swaps of $4.6 million, $3.4 million after tax, or $0.02 per share and (b) a tax benefit related to a reserve adjustment from the completion of the audit of certain of the Company’s prior year tax returns of $3.6 million, or $0.02 per share.  Net income per common share-diluted for the year ended December 31, 2009, excluding the effects of these items is $1.83.

15

Table of Contents

Item 7.           Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis of the results of operations for the three fiscal years ended December 31, 2013, 2012 and 2011 has been derived from and should be read in conjunction with the consolidated financial statements included in Part II, Item 8 herein.

Overview

The Company is a global designer, manufacturer and marketer of electrical, electronic and fiber optic connectors, interconnect systems, antennas, sensor and sensor-based products and coaxial and high-speed specialty cable.  The Company operates through two reporting segments: (i) Interconnect Products and Assemblies and (ii) Cable Products and Solutions.  In 2013, approximately 69% of the Company’s sales were outside the U.S.  The primary end markets for our products are:

·                  information technology and communication devices and systems for the converging technologies of voice, video and data communications;

·                  a broad range of industrial applications and traditional and hybrid-electric automotive applications; and

·                  commercial aerospace and military applications.

The Company’s products are used in a wide variety of applications by numerous customers.  The Company encounters competition in its markets and competes primarily on the basis of technology innovation, product quality, price, customer service and delivery time.  There has been a trend on the part of OEM customers to consolidate their lists of qualified suppliers to companies that have a global presence, can meet quality and delivery standards, have a broad product portfolio and design capability and have competitive prices.  The Company has focused its global resources to position itself to compete effectively in this environment.  The Company believes that its global presence is an important competitive advantage as it allows the Company to provide quality products on a timely and worldwide basis to its multinational customers.

The Company’s strategy is to provide comprehensive design capabilities, a broad selection of products and a high level of service on a worldwide basis while maintaining continuing programs of productivity improvement and cost control in the areas in which it competes.  The Company focuses its research and development efforts through close collaboration with its OEM customers to develop highly-engineered products that meet customer needs and have the potential for broad market applications and significant sales within a one-to-three year period.  The Company is also focused on controlling costs.  The Company does this by investing in modern manufacturing technologies, controlling purchasing processes and expanding into lower cost areas.

The Company’s strategic objective is to further enhance its position in its served markets by pursuing the following success factors:

·                  Develop performance-enhancing interconnect solutions;

·                  Pursue broad diversification;

·                  Expand global presence;

·                  Control costs;

·                  Pursue strategic acquisitions and investments; and

·                  Foster collaborative, entrepreneurial management.

16

Table of Contents

For the year ended December 31, 2013, the Company reported net sales, operating income and net income attributable to Amphenol Corporation of $4,614.7 million, $896.8 million and $635.7 million, respectively, up 8%, 8% and 14%, respectively, from 2012.  Sales and profitability trends are discussed in detail in “Results of Operations” below.  In addition, a strength of the Company has been its ability to consistently generate cash.  The Company uses cash generated from operations to fund capital expenditures and acquisitions, repurchase shares of its common stock, pay dividends and reduce indebtedness.  In 2013, the Company generated operating cash flow of $769.1 million.

Results of Operations

The following table sets forth the components of net income attributable to Amphenol Corporation as a percentage of net sales for the periods indicated.

2013 Compared to 2012

Net sales were $4,614.7 million for the year ended December 31, 2013 compared to $4,292.1 million for the year ended December 31, 2012, an increase of 8% in U.S. dollars, 7% in local currencies and 4% organically (excluding both currency and acquisition impacts).  Sales in the Interconnect Products and Assemblies segment (approximately 93% of net sales) increased 7% in 2013 in U.S. dollars and in local currencies and 4% organically compared to 2012 ($4,269.0 million in 2013 versus $3,987.3 million in 2012).  The sales growth was driven by increases in nearly all of our served markets with contributions from both organic growth and the Company’s acquisition program.  Sales to the automotive market increased (approximately $104.0 million), driven primarily by participation in new programs, higher vehicle volumes and acquisitions.  Sales to the IT and data communications equipment market increased (approximately $57.7 million), primarily due to broad-based strength in servers, storage and network hardware.  Sales to the commercial aerospace market increased (approximately $54.0 million) due to increased demand driven by higher levels of airplane production and new airplane platforms and acquisitions.  Industrial market sales increased (approximately $42.9 million), primarily reflecting the impact of acquisitions.  Sales to the mobile networks market increased (approximately $23.0 million), primarily due to an increase in worldwide network build-outs with particular strength in North America and Europe.  Sales to the mobile devices market increased slightly (approximately $4.6 million).  This was partially offset by reductions in sales to the military market (approximately $9.8 million), primarily due to reductions in procurement by defense contractors related to budget uncertainties.   Sales in the Cable Products and Solutions segment (approximately 7% of net sales) increased 13% in 2013 in U.S. dollars and 14% in local currencies and were down 3% organically compared to 2012 ($345.7 million in 2013 versus $304.8 million in 2012).  Increased sales levels were due to a 2012 acquisition which was partially offset by overall lower spending at cable operators.  Cable Products and Solutions sales are primarily in the broadband communications market.

Geographically, sales in the U.S. in 2013 increased approximately 4% ($1,430.6 million in 2013 versus $1,379.7 million in 2012) compared to 2012.  International sales for 2013 increased approximately 9% in U.S. dollars and in local currencies ($3,184.1 million in 2013 versus $2,912.4 million in 2012) compared to 2012 with particular strength in Europe.  The comparatively weaker U.S. dollar in 2013 had the effect of increasing net sales by approximately $15.4 million when compared to foreign currency translation rates in 2012.

The gross profit margin as a percentage of net sales was 31.5% in 2013 compared to 31.3% in 2012.  The increase in gross profit margin as a percentage of sales relates primarily to higher margins in the Interconnect Products and Assemblies segment due primarily to increased volume and cost reduction actions.   Operating margin in the Interconnect Products and Assemblies segment was 21.8%

17

Table of Contents

and 21.5% of sales in 2013 and 2012, respectively.   Operating margin in the Cable Products and Solutions segment decreased to 13.4% in 2013 from 13.5% of sales in 2012, primarily as a result of market pricing and product mix.  On a consolidated basis, operating income margin was 19.4%, up 10 basis points from 2012, which included the impact of acquisition-related expenses discussed below.

As separately presented in the Consolidated Statements of Income, the Company incurred $6.0 million and $2.0 million of acquisition-related expenses in 2013 and 2012, respectively, in connection with acquisitions made during each of these respective years.  These expenses include professional fees, transaction-related fees and other external expenses. For the years ended December 31, 2013 and 2012, these expenses had an impact on net income of $4.6 million, or $0.02 per share, and $2.0 million, or $0.01 per share, respectively.  Excluding the effect of these expenses, operating income margin was 19.6% in 2013 compared to 19.3% in 2012.

Selling, general and administrative expenses were $548.1 million and $512.9 million in 2013 and 2012 and represented approximately 11.9% of net sales for 2013 and 2012, respectively.  Administrative expenses increased approximately $9.9 million in 2013 primarily related to increases in employee related benefits, stock-based compensation expense and amortization of acquisition-related identified intangible assets and represented approximately 4.6% and 4.7% of net sales in 2013 and 2012, respectively.  Research and development expenses increased approximately $11.0 million in 2013 reflecting increases in expenses for new product development and represented approximately 2.2% of net sales for both 2013 and 2012.  Selling and marketing expenses increased approximately $14.3 million in 2013 primarily related to the increase in sales volume and represented approximately 5.1% of net sales for both 2013 and 2012.

Interest expense was $63.6 million for 2013 compared to $59.6 million for 2012. The increase is primarily attributed to higher average debt levels from the Company’s acquisitions and stock repurchase programs.

Other income, net, was $13.4 million for 2013 compared to $10.1 million for 2012, primarily related to interest income on higher levels of cash, cash equivalents and short-term investments.

The provision for income taxes was at an effective rate of 24.6% in 2013 and 28.2% in 2012.   The 2013 tax rate reflects a decrease in tax expense and the 2012 tax rate reflects an increase in tax expense of $11.3 million, or $0.07 per diluted common share, resulting from the delay, by the U.S. government, in the reinstatement of certain federal income tax provisions for the year 2012 relating primarily to research and development credits and certain U.S. taxes on foreign income that are part of the tax provisions within the American Taxpayer Relief Act.  Such tax provisions were reinstated on January 2, 2013 with retroactive effect to 2012.  Under U.S. GAAP, the benefit to the Company of $11.3 million relating to the 2012 tax year was recorded as a benefit in the first quarter of 2013 at the date of reinstatement; as such, between the fourth quarter of 2012 and the first quarter of 2013, there is no net impact on the Company from an income statement perspective.  The 2013 tax rate also reflects a reduction in tax expense of $3.6 million for tax reserve adjustments relating to the completion of the audits of certain of the Company’s prior year tax returns.  Excluding these impacts as well as the net impact of the acquisition-related expenses, the Company’s effective tax rate for 2013 and 2012 was 26.3% and 26.7%, respectively.

The Company operates in over sixty tax jurisdictions, and at any point in time has numerous audits underway at various stages of completion. With few exceptions, the Company is subject to income tax examinations by tax authorities for the years 2010 and after.  The Company is generally not able to precisely estimate the ultimate settlement amounts or timing until the close of an audit.  The Company evaluates its tax positions and establishes liabilities for uncertain tax positions that may be challenged by local authorities and may not be fully sustained, despite the Company’s belief that the underlying tax positions are fully supportable. As of December 31, 2013, the amount of the liability for unrecognized tax benefits, which if recognized would impact the effective tax rate, was approximately $14.9 million, the majority of which is included in other long-term liabilities in the accompanying Consolidated Balance Sheets.  Unrecognized tax benefits are reviewed on an ongoing basis and are adjusted for changing facts and circumstances, including progress of tax audits and closing of statute of limitations. Based on information currently available, management anticipates that over the next twelve month period, audit activity could be completed and statutes of limitations may close relating to existing unrecognized tax benefits of approximately $1.8 million.

2012 Compared to 2011

Net sales were $4,292.1 million for the year ended December 31, 2012 compared to $3,939.8 million for the year ended December 31, 2011, an increase of 9% in U.S. dollars, 10% in local currencies and 5% organically (excluding both currency and acquisition impacts).  Sales in the Interconnect Products and Assemblies segment in 2012 (approximately 93% of net sales) increased 9% in U.S. dollars, 10% in local currencies and 5% organically compared to 2011 ($3,987.3 million in 2012 versus $3,666.0 million in 2011). The Company achieved strong organic growth in the automotive, industrial, mobile devices, IT and data communications equipment, and commercial aerospace markets. Sales to the automotive market increased (approximately $121.7 million), driven primarily by acquisitions and growth in new electronics applications. Industrial market sales increased (approximately $79.2 million),

18

Table of Contents

primarily reflecting acquisitions and increased sales to the alternative energy and oil and gas markets.  Sales to the mobile devices market increased (approximately $69.6 million), primarily due to increased demand on new mobile computing platforms. Sales to the IT and data communications equipment market increased (approximately $63.6 million), primarily due to increased sales of high speed and power products in latest generation servers.  Sales to the commercial aerospace market increased (approximately $38.0 million), primarily due to higher airplane production volumes as well as new airplane platforms.  This was partially offset by reductions in sales to the military market (approximately $22.9 million), primarily due to reductions in procurement by defense contractors related to budget uncertainties and a reduction in sales to the mobile networks market (approximately $26.6 million), primarily due to slowed demand at base station/equipment manufacturers.  Sales in the Cable Products and Solutions segment in 2012 (approximately 7% of net sales) increased 11% in U.S. dollars, 14% in local currencies and 8% organically compared to 2011 ($304.8 million in 2012 versus $273.7 million in 2011). Organic growth was primarily due to increased demand in the broadband communications market.

Geographically, sales in the U.S. in 2012 increased approximately 9% ($1,379.7 million in 2012 versus $1,268.9 million in 2011) compared to 2011.  International sales for 2012 increased approximately 9% in U.S. dollars and 11% in local currencies ($2,912.4 million in 2012 versus $2,670.9 million in 2011) compared to 2011 with particular strength in Asia.  The comparatively stronger U.S. dollar in 2012 had the effect of decreasing net sales by approximately $48.3 million when compared to foreign currency translation rates in 2011.

The gross profit margin as a percentage of net sales was 31.3% in 2012 compared to 31.6% in 2011.  The decrease in gross profit margin as a percentage of sales relates primarily to lower margins in the Interconnect Products and Assemblies segment due primarily to product mix, partially offset by increased margins in the Cable Products and Solutions segment, primarily as a result of higher volumes and favorable product mix from an acquisition in 2012.  Operating margin in the Interconnect Product and Assemblies segment was 21.5% of sales in both 2012 and 2011 as the lower gross margin was offset by lower selling, general, and administrative expenses.  Operating margin in the Cable Products and Solutions segment increased to 13.5% in 2012 from 12.7% of sales in 2011, primarily as a result of higher gross margins.  On a consolidated basis, operating margins improved from 19.1% in 2011 to 19.3% in 2012.

As separately presented in the Consolidated Statements of Income, the Company incurred $2.0 million of acquisition-related expenses in both 2012 and 2011 in connection with acquisitions made during each of these respective years.  For the years ended December 31, 2012 and 2011, these expenses had an impact of $2.0 million and $1.8 million on net income, respectively, or $0.01 per share for each year.

Selling, general and administrative expenses were $512.9 million and $486.3 million in 2012 and 2011.  Selling, general, and administrative expenses increased approximately 5% in 2012 over 2011, compared to a 9% increase in sales, and therefore, declined as a percentage of sales from 12.4% in 2011 to 12.0% in 2012.  The decrease as a percentage of sales relates primarily to cost control actions and product mix. Administrative expenses increased approximately $24.5 million in 2012, primarily related to increases in stock-based compensation expense, salaries and employee-related benefits and amortization of acquisition-related identified intangible assets, and represented approximately 4.7% and 4.5% of sales for 2012 and 2011, respectively.  Research and development expenditures increased approximately $3.6 million in 2012, reflecting increases in expenditures for new product development and represented approximately 2.2% and 2.3% of sales for 2012 and 2011, respectively.  Selling and marketing expenses in 2012 were consistent with amounts incurred in 2011 and represented approximately 5.1% and 5.6% of sales for 2012 and 2011, respectively.

Interest expense was $59.6 million for 2012 compared to $43.0 million for 2011. The increase is primarily attributed to higher average debt levels related to the stock repurchases made under the 2011 Program and higher average borrowing costs due primarily to the issuance of the 4.00% Senior Notes in January 2012.

Other income, net, was $10.1 million for 2012 compared to $8.1 million for 2011, primarily related to interest income on higher levels of cash, cash equivalents and short-term investments.

The provision for income taxes was at an effective rate of 28.2% in 2012 and 26.2% in 2011.  The 2012 tax rate reflects an increase in tax expense of $11.3 million, or $0.07 per diluted common share, resulting from the delay, by the U.S. government, in the reinstatement of certain federal income tax provisions for the year 2012 relating primarily to research and development credits and certain U.S. taxes on foreign income that are part of the tax provisions within the American Taxpayer Relief Act.  Such tax provisions were reinstated on January 2, 2013 with retroactive effect to 2012.  Under U.S. GAAP, the benefit to the company of $11.3 million relating to the 2012 tax year will be recorded as a benefit in the first quarter of 2013 at the date of reinstatement; as such, between the fourth quarter of 2012 and the first quarter of 2013, there is no net impact on the Company from an income statement perspective.  The 2011 tax rate reflects a decrease of $4.5 million, relating primarily to reserve adjustments from the favorable settlement of certain tax positions and the completion of prior year audits.  Excluding these impacts as well as the net impact of the acquisition-related expenses, the loss incurred related to the 2011 Sidney flood and the 2011 contingent consideration gain, the Company’s effective tax rate for 2012 and 2011 was 26.7% and 26.8%, respectively.

19

Table of Contents

Liquidity and Capital Resources

Cash flow provided by operating activities was $769.1 million for 2013 compared to $674.7 million for 2012. The increase in cash flow provided by operating activities for 2013 compared to 2012 is primarily due to an increase in net income and a net decrease in other long-term assets partially offset by a higher increase in components of working capital.  Cash flow provided by operating activities was $674.7 million for 2012 compared to $565.2 million for 2011. The increase in cash flow provided by operating activities for 2012 compared to 2011 is primarily due to an increase in net income and a lower increase in components of working capital, partially offset by a net increase in other long-term assets.

The components of working capital as presented on the accompanying Consolidated Statements of Cash Flow increased $26.3 million in 2013 due primarily to increases in accounts receivable, inventory, and other current assets of $37.0 million, $8.0 million and $18.4 million, respectively, offset by increases in accounts payable and accrued liabilities of $6.9 million and $30.2 million, respectively. The components of working capital as presented on the accompanying Consolidated Statements of Cash Flow increased $8.9 million in 2012 due primarily to increases in inventory and accounts receivable of $45.9 million and $123.9 million, respectively, offset by increases in accounts payable and accrued liabilities of $99.4 million and $61.5 million, respectively. The components of working capital increased $110.3 million in 2011 due primarily to increases in inventory, accounts receivable, and other current assets of $88.5 million, $9.7 million and $8.9 million, respectively, and a decrease of $27.5 million in accounts payable, partially offset by a $24.3 million increase in accrued liabilities.

The following represents the significant changes in the amounts as presented on the accompanying Consolidated Balance Sheets in 2013. Accounts receivable increased $90.3 million to $1,001.0 million resulting from higher sales levels, the impact of acquisitions of $48.0 million and translation resulting from the comparatively weaker U.S. dollar at December 31, 2013 compared to December 31, 2012 (“Translation”).  Days sales outstanding at December 31, 2013 and 2012 were 70 days and 72 days, respectively.  Inventory increased $58.9 million to $792.6 million, primarily due to the impact of higher sales activity and the impact of acquisitions of $48.7 million. Inventory days at December 31, 2013 and 2012 were 80 and 83, respectively.  Other current assets increased $51.8 million to $171.7 million, primarily due to increases in value added tax and other receivables and the impact of acquisitions of $26.9 million.  Land and depreciable assets, net, increased $115.0 million to $532.4 million reflecting capital expenditures of $158.3 million, fixed assets from acquisitions of $66.2 million and Translation, partially offset by depreciation of $113.0 million and disposals.  Goodwill and other long term assets increased $386.9 million to $2,478.0 million, primarily as a result of five acquisitions in the Interconnect Products and Assemblies segment completed during 2013 and Translation.  Accounts payable increased $53.4 million to $549.9 million, primarily as a result of an increase in purchasing activity during the year related to higher sales levels, the impact of acquisitions of $33.6 million and Translation. Payable days at December 31, 2013 and 2012 were 56 days. Total accrued expenses increased $66.7 million to $358.5 million, primarily due to increases in accrued salaries and the impact of acquisitions of $52.4 million.  Accrued pension and post-employment benefit obligations decreased $64.6 million to $180.0 million due primarily to a decrease in the projected benefit obligation as a result of an increase in the discount rate assumption.  Other long-term liabilities increased $32.6 million due primarily to an increase in deferred tax liabilities.

In 2013, cash flow provided by operating activities of $769.1 million, net borrowings of $418.2 million, proceeds from the exercise of stock options including excess tax benefits from stock-based payment arrangements of $116.2 million, and proceeds from the disposal of fixed assets of $3.7 million, were used to fund acquisition related payments of $484.9 million,  purchases of treasury stock of $324.7 million, capital expenditures of $158.4 million, dividend payments of $96.8 million, net purchases of short-term investments of $53.7 million and payments to shareholders of noncontrolling interests of $4.4 million, which resulted in an increase in cash and cash equivalents including the impact of Translation of $196.0 million.

In 2012, cash flow provided by operating activities of $674.7 million, net borrowings of $325.2 million, proceeds from the exercise of stock options including excess tax benefits from stock-based payment arrangements of $117.1 million, and proceeds from the disposal of fixed assets of $4.8 million, were used to fund purchases of treasury stock of $380.0 million, acquisition-related payments of $251.5 million, capital expenditures of $129.1 million, net purchases of short-term investments of $117.8 million, payments to shareholders of noncontrolling interests of $5.2 million and dividend payments of $70.1 million, which resulted in an increase in cash and cash equivalents including the impact of Translation of $175.8 million.

At December 31, 2013 and 2012, the Company had cash, cash equivalents and short-term investments of $1,192.2 million and $942.5 million, respectively.  The majority of these amounts are located outside of the U.S.  The Company does not currently intend to repatriate these funds.  However, any repatriation of funds would result in the need to accrue and pay income taxes.

In July 2013, the Company amended its revolving credit facility (the “Revolving Credit Facility”) to (1) reduce borrowing costs, (2) extend the maturity date to July 2018 and (3) increase aggregate commitments under the Revolving Credit Facility by $500.0 million, thereby increasing the Revolving Credit Facility to $1,500.0 million.  At December 31, 2013, borrowings and availability under the Revolving Credit Facility were $927.3 million and $572.7 million, respectively.  The interest rate on borrowings under the

20

Table of Contents

Revolving Credit Facility was at a spread over LIBOR.  The Revolving Credit Facility requires payment of certain annual agency and commitment fees and requires that the Company satisfy certain financial covenants.  At December 31, 2013, the Company was in compliance with the financial covenants under the Revolving Credit Facility.

In November 2009, the Company issued $600.0 million principal amount of unsecured 4.75% Senior Notes due November 2014 (the “4.75% Senior Notes”) at 99.813% of their face value. Interest on the 4.75% Senior Notes is payable semi-annually on May 15 and November 15 of each year to the holders of record as of the immediately preceding May 1 and November 1. The Company may, at its option, redeem some or all of the 4.75% Senior Notes at any time by paying a make-whole premium, plus accrued and unpaid interest, if any, to the date of repurchase.  The 4.75% Senior Notes are unsecured and rank equally in right of payment with the Company’s other unsecured senior indebtedness.  The fair value of the 4.75% Senior Notes at December 31, 2013 was approximately $621.0 million based on recent bid prices.

In January 2012, the Company issued $500.0 million principal amount of unsecured 4.00% Senior Notes due February 2022 (the “4.00% Senior Notes”) at 99.746% of their face value.  Net proceeds from the sale of the 4.00% Senior Notes were used to repay borrowings under the Company’s Revolving Credit Facility.  Interest on the 4.00% Senior Notes is payable semi-annually on February 1 and August 1 of each year, beginning August 1, 2012, to the holders of record as of the immediately preceding January 15 and July 15.  The Company may, at its option, redeem some or all of the 4.00% Senior Notes at any time by paying 100% of the principal amount, plus accrued and unpaid interest, if any, to the date of repurchase, and if redeemed prior to November 1, 2021, a make-whole premium. The 4.00% Senior Notes are unsecured and rank equally in right of payment with the Company’s other unsecured senior indebtedness.  The fair value of the 4.00% Senior Notes at December 31, 2013 was approximately $491.0 million based on recent bid prices.

In January 2014, the Company issued $750.0 million principal amount of unsecured 2.55% Senior Notes due January 2019 (the “2.55% Senior Notes”) at 99.846% of their face value.  The Company used the net proceeds from the sale of the 2.55% Senior Notes to repay borrowings under the Company’s Revolving Credit Facility.  Interest on the 2.55%  Senior Notes is payable semi-annually on January 30 and July 30 of each year, commencing July 30, 2014, to the holders of record as of the immediately preceding January 15 and July 15.  The Company may, at its option, redeem some or all of the 2.55% Senior Notes at any time by paying 100% of the principal amount, plus accrued and unpaid interest, if any, to the date of redemption, and if redeemed prior to December 30, 2018, a make-whole premium. The 2.55% Senior Notes are unsecured and rank equally in right of payment with the Company’s other unsecured senior indebtedness (the 4.75% Senior Notes, the 4.00% Senior Notes and the 2.55% Senior Notes are collectively referred to as the “Senior Notes”).

A subsidiary of the Company had entered into a Receivables Securitization Facility with a financial institution whereby the subsidiary could sell an undivided interest of up to $100.0 million in a designated pool of qualified accounts receivable (the “Receivables Securitization Facility”). The Company serviced, administered and collected the receivables on behalf of the purchaser. The Receivables Securitization Facility included certain covenants and provided for various events of termination.  Transfers of receivables were reflected as debt issued in the Company’s Condensed Consolidated Statements of Cash Flow, and the value of the outstanding undivided interest held by investors was accounted for as a secured borrowing and was included in the Company’s Condensed Consolidated Balance Sheets as short-term debt as of December 31, 2012.   Fees incurred in connection with the Receivables Securitization Facility are included in interest expense.  Such fees were approximately $0.9 million, $1.0 million, and $1.6 million for 2013, 2012 and 2011, respectively.  On November 15, 2013, the Company terminated the Receivables Securitization Facility.

In October 2013, the Company entered into a Credit Agreement among the Company, certain subsidiaries of the Company and a financial institution (the “Credit Agreement”).  The Credit Agreement provides for a $100.0 million uncommitted and unsecured credit facility with the ability to borrow at a spread over LIBOR, which is renewable annually.  The borrowings under the Credit Agreement were used to repay borrowings under the Company’s Receivable Securitization Facility.  At December 31, 2013, borrowings and availability under the Credit Agreement were $100.0 million and nil, respectively.

The carrying value of borrowings under the Company’s Revolving Credit Facility and Credit Agreement approximated their fair value at December 31, 2013 due to their relative short-term maturities and market interest rates.

The Company had $14.1 million of issued and unused letters of credit at December 31, 2013.

The Company’s primary ongoing cash requirements will be for operating and capital expenditures, product development activities, repurchase of its common stock, funding of pension obligations, dividends and debt service.  The Company may also use cash to fund all or part of the cost of acquisitions. The Company expects that capital expenditures in 2014 will be approximately $180 to $200 million.   Contingent upon declaration by the Board of Directors, the Company generally pays a quarterly dividend on its common stock.  In July 2013, the Board of Directors approved an increase in the quarterly dividend rate from $0.105 to $0.20 per share effective with the third quarter 2013 dividend.  Total dividends declared during 2013, 2012 and 2011 were $96.8 million, $67.7 million and $10.1 million, respectively. Total dividends paid in 2013, 2012 and 2011 were $96.8 million, $70.1 million and $10.3

21

Table of Contents

million, respectively, including those declared in the prior year and paid in the current year.  The Company’s debt service requirements consist primarily of principal and interest on the Senior Notes, the Revolving Credit Facility and the Credit Agreement.

The Company’s primary sources of liquidity are internally generated cash flow, the Company’s credit facilities, and cash, cash equivalents and short-term investments.  The Company expects that ongoing cash requirements will be funded from these sources; however, the Company’s sources of liquidity could be adversely affected by, among other things, a decrease in demand for the Company’s products or a deterioration in certain of the Company’s financial ratios.  However, management believes that the Company’s cash, cash equivalents and short-term investment position, ability to generate strong cash flow from operations, and availability under its credit facilities will allow it to meet its obligations for the next twelve months.

In January 2013, the Company’s Board of Directors authorized a stock repurchase program under which the Company may repurchase up to 10 million shares of its common stock during the two year period ending January 31, 2015 (the “2013 Stock Repurchase Program”). The price and timing of any such purchases under the 2013 Stock Repurchase Program after December 31, 2013 will depend on factors such as levels of cash generation from operations, the volume of stock option exercises by employees, cash requirements for acquisitions, economic and market conditions and stock price.  Through February 15, 2014, the Company has repurchased 1.4 million shares of its common stock under the 2013 Program for $120.3 million.  These treasury shares will be retired by the Company and common stock and accumulated earnings will be reduced accordingly.   At February 15, 2014, approximately 4.3 million additional shares of common stock may be repurchased under the 2013 Program.

Environmental Matters

Certain operations of the Company are subject to environmental laws and regulations which govern the discharge of pollutants into the air and water, as well as the handling and disposal of solid and hazardous wastes. The Company believes that its operations are currently in substantial compliance with applicable environmental laws and regulations and that the costs of continuing compliance will not have a material effect on the Company’s financial condition, results of operations or cash flows.

Owners and occupiers of sites containing hazardous substances, as well as generators of hazardous substances, are subject to broad liability under various environmental laws and regulations, including expenditures for cleanup and monitoring costs and potential damages arising out of past disposal activities. Such liability in many cases may be imposed regardless of fault or the legality of the original disposal activity. The Company has performed remediation activities and is currently performing operations and maintenance and monitoring activities at three off-site disposal sites previously utilized by the Company’s facility in Sidney, New York, and others - the Richardson Hill Road landfill, the Route 8 landfill and the Sidney landfill.  Actions at the Richardson Hill Road and Sidney landfills were undertaken subsequent to designation as “Superfund” sites on the National Priorities List under the Comprehensive Environmental Response, Compensation and Liability Act of 1980. The Route 8 landfill was designated as a New York State Inactive Hazardous Waste Disposal Site, with remedial actions taken pursuant to Chapter 6, Section 375-1 of the New York Code of Rules and Regulations. In addition, the Company is currently performing monitoring activities at, and in proximity to, its manufacturing site in Sidney, New York. The Company is also engaged in remediating or monitoring environmental conditions at certain of its other manufacturing facilities and has been named as a potentially responsible party for cleanup costs at other off-site disposal sites.

Subsequent to the acquisition of Amphenol Corporation from Allied Signal Corporation (“Allied Signal”) in 1987 (Allied Signal merged with Honeywell International Inc. in December 1999 (“Honeywell”)), the Company and Honeywell were named jointly and severally liable as potentially responsible parties in connection with several environmental cleanup sites. The Company and Honeywell jointly consented to perform certain investigations and remediation and monitoring activities at the Route 8 landfill and the Richardson Hill Road landfill, and they were jointly ordered to perform work at the Sidney landfill, all as referred to above. All of the costs incurred relating to these three sites are currently reimbursed by Honeywell based on an agreement (the “Honeywell Agreement”) entered into in connection with the acquisition in 1987. The environmental investigation, remediation and monitoring activities identified by the Company, including those referred to above, are covered under the Honeywell Agreement.  Management does not believe that the costs associated with resolution of these or any other environmental matters will have a material effect on the Company’s consolidated financial condition, results of operations or cash flows.

Since 1987, the Company has not been identified nor has it been named as a potentially responsible party with respect to any other significant on-site or off-site hazardous waste matters. In addition, the Company believes that its manufacturing activities and disposal practices since 1987 have been in material compliance with applicable environmental laws and regulations. Nonetheless, it is possible that the Company will be named as a potentially responsible party in the future with respect to additional Superfund or other sites. Although the Company is unable to predict with any reasonable certainty the extent of its ultimate liability with respect to any pending or future environmental matters, the Company believes, based upon information currently known by management about the Company’s manufacturing activities, disposal practices and estimates of liability with respect to known environmental matters, that any such liability will not have a material effect on the Company’s consolidated financial condition, results of operations or cash flows.

22

Table of Contents

Inflation and Costs

The cost of the Company’s products is influenced by the cost of a wide variety of raw materials, including precious metals such as gold and silver used in plating; aluminum, copper, brass and steel used for contacts, shells and cable; and plastic materials used in molding connector bodies, inserts and cable.  The Company strives to offset the impact of increases in the cost of raw materials, labor and services through price increases, productivity improvements and cost saving programs.  However, in certain markets, particularly in the communications related markets, this can be difficult and there is no guarantee that the Company will be successful.

Foreign Exchange

The Company conducts business in many international currencies through its worldwide operations, and as a result is subject to foreign exchange exposure due to changes in exchange rates of the various currencies. Changes in exchange rates can positively or negatively affect the Company’s sales, gross margins and equity. The Company attempts to minimize currency exposure risk in a number of ways including producing its products in the same country or region in which the products are sold, thereby generating revenues and incurring expenses in the same currency, cost reduction and pricing actions, and working capital management. However, there can be no assurance that these actions will be fully effective in managing currency risk, especially in the event of a significant and sudden decline in the value of any of the international currencies of the Company’s worldwide operations.

Recent Accounting Pronouncements

In March 2013, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2013-05, Parent’s Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity (“ASU 2013-05”), which clarifies preexisting guidance regarding the treatment of cumulative translation adjustments when a parent sells part or all of its investment in a foreign entity. ASU 2013-05 is effective for fiscal years beginning after December 15, 2013; however, early adoption is permitted.  The Company does not expect that the adoption of this update will have a significant effect on its financial statements.

In February 2013, the FASB issued ASU 2013-02, Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income (“ASU 2013-02”). The update requires disclosure of amounts reclassified out of accumulated other comprehensive income by component.  In addition, an entity is required to present either on the face of the Consolidated Statements of Income or in the notes, significant amounts reclassified out of accumulated other comprehensive income by the respective line items of net income but only if the amount reclassified is required to be reclassified to net income in its entirety in the same reporting period. For amounts not reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures that provide additional detail about those amounts. ASU 2013-02 was effective prospectively for the Company for the first quarter of 2013.  Because this standard only impacts presentation and disclosure requirements, its adoption did not have a significant effect on the Company’s financial statements.

Pensions

The Company and certain of its domestic subsidiaries have defined benefit pension plans (“U.S. Plans”), which cover certain U.S. employees and which represent the majority of the plan assets and benefit obligations of the aggregate defined benefit plans of the Company.  The U.S. Plans’ benefits are generally based on years of service and compensation and are generally noncontributory. Certain U.S. employees not covered by the U.S. Plans are covered by defined contribution plans.  Certain foreign subsidiaries also have defined benefit plans covering their employees (the “International Plans”). The pension expense for the U.S. Plans and International Plans (the “Plans”) approximated $30.1 million, $25.2 million and $19.1 million in 2013, 2012 and 2011, respectively, and is calculated based upon a number of actuarial assumptions established on January 1 of the applicable year, including a weighted-average discount rate, rate increase of future compensation levels, and an expected long-term rate of return on the respective Plans’ assets.

The discount rate used by the Company for valuing pension liabilities is based on a review of high quality corporate bond yields with maturities approximating the remaining life of the projected benefit obligations. The discount rate for the U.S. Plans on this basis was 4.60% at December 31, 2013 and 3.75% at December 31, 2012. Although future changes to the discount rate are unknown, had the discount rate increased or decreased 50 basis points, the accrued benefit obligation would have decreased or increased by approximately $20.0 million.

In developing the expected long-term rate of return assumption for the U.S. Plans, the Company evaluated input from its external actuaries and investment consultants as well as long-term inflation assumptions. Projected returns by such consultants are based on broad equity and bond indices.  The Company also considered its historical twenty-year compounded return of approximately 9%, which has been in excess of these broad equity and bond benchmark indices. As described above, the expected long-term rate of return on the U.S. Plans’ assets is based on an asset allocation assumption of 60% with equity managers (with an expected long-term rate of

23

Table of Contents

return of approximately 9%) and 40% with fixed income managers (with an expected long-term rate of return of approximately 7%).  As of December 31, 2013 and 2012, the asset allocation was 65% and 62% with equity managers and 32% and 37% with fixed income managers and 3% and 1% in cash, respectively.  The Company believes that the long-term asset allocation on average will approximate 60% with equity managers and 40% with fixed income managers. The Company regularly reviews the actual asset allocation and periodically rebalances investments to its targeted allocation when considered appropriate. Based on this methodology, the Company’s expected long-term rate of return assumption to determine the accrued benefit obligation of the U.S. Plans at December 31, 2013 and 2012 is 8.00%.

The Company made cash contributions to the Plans of $23.3 million, $21.8 million and $22.8 million in 2013, 2012 and 2011, respectively. The total liability for accrued pension and post-employment benefit obligations under the Company’s pension and post-retirement benefit plans decreased in 2013 to $179.5 million ($4.0 million of which is included in other accrued expenses primarily representing required contributions to be made during 2014 for unfunded foreign plans) from $246.6 million in 2012 primarily due to an increase of the discount rate assumption compared to 2012. The Company estimates that, based on current actuarial calculations, it will make a cash contribution to the Plans in 2014 of approximately $22.0 million, most of which is related to the U.S. Plans.  Cash contributions in subsequent years will depend on a number of factors including the investment performance of the respective Plans’ assets.

The Company offers various defined contribution plans for U.S. and foreign employees. Participation in these plans is based on certain eligibility requirements.  The Company matches the majority of employee contributions to the U.S. defined contribution plans with cash contributions up to a maximum of 5% of eligible compensation.  The Company provided matching contributions of approximately $3.0 million, $2.7 million and $2.5 million in 2013, 2012 and 2011, respectively.

Critical Accounting Policies and Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates.  Estimates are adjusted as new information becomes available.  The Company’s critical accounting policies and estimates are set forth below.

Revenue Recognition - The Company’s primary source of revenues is from product sales to its customers.  Revenue from sales of the Company’s products is recognized at the time the goods are delivered and title passes, provided the earning process is complete and revenue is measurable.  Delivery is determined by the Company’s shipping terms, which are primarily freight on board shipping point.  Revenue is recorded at the net amount to be received after deductions for estimated discounts, allowances and returns.  These estimates and reserves are determined and adjusted as needed based upon historical experience, contract terms and other related factors.  The shipping costs for the majority of the Company’s sales are paid directly by the Company’s customers.  In the broadband communications market (approximately 8% of consolidated sales in 2013), the Company pays for shipping costs to the majority of its customers.  Shipping costs are also paid by the Company for certain customers in the Interconnect Products and Assemblies segment.  Amounts billed to customers related to shipping costs are immaterial and are included in net sales.  Shipping costs incurred to transport products to the customer which are not reimbursed are included in selling, general and administrative expense.

Inventories - Inventories are stated at the lower of standard cost, which approximates average cost, or market. Provisions for slow-moving and obsolete inventory are made based on historical experience and product demand. Should future product demand change, existing inventory could become slow-moving or obsolete, and provisions would be increased accordingly.

Depreciable Assets - Property, plant and equipment are carried at cost less accumulated depreciation. The appropriateness and the recoverability of the carrying value of such assets are periodically reviewed taking into consideration current and expected business conditions.  The Company has not recorded any significant impairments.

Goodwill - The Company performs its annual evaluation for the impairment of goodwill for the Company’s reporting units as of each June 30. The Company has defined its reporting units as the two reportable business segments “Interconnect Products and Assemblies” and “Cable Products and Solutions”, as the components of these reportable business segments have similar economic characteristics. In 2013, the Company utilized the option to first assess qualitative factors to determine whether it is necessary to perform the two-step quantitative goodwill impairment test in accordance with ASU 2011-08, Intangibles — Goodwill and Other: Testing for Goodwill Impairment (“ASU 2011-08”), which was adopted by the Company as of January 1, 2012. Under this amendment, an entity is not required to calculate the fair value of a reporting unit unless the Company determines, based on a qualitative assessment of events and circumstances, that it is more likely than not that its fair value is less than its carrying amount.

24

Table of Contents

As of June 30, 2013, the Company has determined that it is more likely than not that the fair value of its reporting units is greater than its carrying amount. The Company has not recognized any goodwill impairment in 2013, 2012, or 2011 in connection with its annual impairment test.

Defined Benefit Plan Obligation - The defined benefit plan obligation is based on significant assumptions such as mortality rates, discount rates and plan asset rates of return as determined by the Company in consultation with the respective benefit plan actuaries and investment advisors (Note 9).

Income Taxes - Deferred income taxes are provided for revenue and expenses which are recognized in different periods for income tax and financial statement reporting purposes.  At December 31, 2013, the cumulative amount of undistributed earnings of foreign affiliated companies was approximately $2.6 billion.  Deferred income taxes are not provided on undistributed earnings of foreign affiliated companies as it is the Company’s intention to reinvest these earnings permanently outside the U.S.  It is not practicable to estimate the amount of tax that might be payable if undistributed earnings were to be repatriated as there is a significant amount of uncertainty with respect to the tax impact of the remittance of these earnings due to the fact that dividends received from foreign subsidiaries may generate additional foreign tax credits, which could ultimately reduce the U.S. tax cost of the dividend.  These uncertainties are further complicated by the significant number of foreign tax jurisdictions involved.  Deferred tax assets are regularly assessed for recoverability based on both historical and anticipated earnings levels and a valuation allowance is recorded when it is more likely than not that these amounts will not be recovered. The tax effects of an uncertain tax position taken or expected to be taken in income tax returns are recognized only if it is “more likely than not” to be sustained on examination by the taxing authorities, based on its technical merits as of the reporting date.  The tax benefits recognized in the financial statements from such a position are measured based on the largest benefit that has a greater than fifty percent likelihood of being realized upon ultimate settlement.  The Company includes estimated interest and penalties related to unrecognized tax benefits in the provision for income taxes.

The significant accounting policies are more fully described in Note 1 to the Company’s Consolidated Financial Statements.

Disclosures about contractual obligations and commitments

The following table summarizes the Company’s known obligations to make future payments pursuant to certain contracts as of December 31, 2013, as well as an estimate of the timing in which such obligations are expected to be satisfied.

(1)         The Company has excluded expected interest payments on the Revolving Credit Facility and Credit Agreement from the above table, as this calculation is largely dependent on average debt levels the Company expects to have during each of the years presented.  The actual interest payments made related to the Revolving Credit Facility, Credit Agreement and Receivables Securitization Facility in 2013 were $10.6 million. Expected debt levels, and therefore expected interest payments, are difficult to predict, as they are significantly impacted by such items as future acquisitions, repurchases of treasury stock, dividend payments as well as payments or additional borrowing made to reduce or increase the underlying revolver balance.

Additionally, the Company has excluded the expected interest payments on the 2.55% Senior Notes which were issued in January 2014 and are due in January 2019.  The net proceeds from the sale of the 2.55% Senior Notes were used to repay borrowings under the Revolving Credit Facility.  The Company expects to make annual interest payments of approximately $19.1 million until maturity of the 2.55% Senior Notes.

(2)         Included in this table are estimated benefit payments expected to be made under the Company’s unfunded pension and post-retirement benefit plans. The Company also maintains several funded pension and post-retirement benefit plans, the most significant of which covers its U.S. employees. Over the past several years, there has been no minimum requirement for Company contributions to the U.S. Plans due to prior contributions made in excess of minimum requirements, however, the Company did make a voluntary contribution of approximately $15.0 million in 2013.  An anticipated minimum required contribution of approximately $9.0 million was included in the above table related to the U.S. Plans for 2014. It is not possible to reasonably estimate expected required contributions in the above table after 2014 since several assumptions are required to calculate minimum required contributions, such as the discount rate and expected returns on pension assets.

(3)         As of December 31, 2013, the Company has non-current liabilities of approximately $14.9 million recognized in accordance with the Income Taxes topic of the Accounting Standards Codification.  These liabilities have been excluded from the above table due to the high degree of uncertainty regarding the timing of potential future cash flows; it is difficult to make a reasonably reliable estimate of the amount and period in which these liabilities might be paid.

25

Table of Contents

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

The Company, in the normal course of doing business, is exposed to a variety of risks, including market risks associated with foreign currency exchange rates and changes in interest rates.

Foreign Currency Exchange Rate Risk

The Company conducts business in many international currencies through its worldwide operations, and as a result is subject to foreign exchange exposure due to changes in exchange rates of the various currencies. Changes in exchange rates can positively or negatively affect the Company’s sales, gross margins and equity. The Company attempts to minimize currency exposure risk in a number of ways including producing its products in the same country or region in which the products are sold, thereby generating revenues and incurring expenses in the same currency, cost reduction and pricing actions, and working capital management.  However, there can be no assurance that these actions will be fully effective in managing currency risk, especially in the event of a significant and sudden decline in the value of any of the international currencies of the Company’s worldwide operations.

As of December 31, 2013, the Company had a forward contract that effectively fixed a Hong Kong dollar denominated intercompany debt obligation of 604.7 million Hong Kong dollars into a fixed U.S. dollar denominated obligation expiring in November 2014 concurrent with the underlying intercompany loan, a forward contract that effectively fixed a Euro denominated intercompany debt obligation of 174.6 million Euros into a fixed Hong Kong dollar denominated obligation expiring in December 2014 concurrent with the underlying intercompany loan and two forward contracts that effectively fixed Great Britain Pound denominated intercompany debt obligations of 25.0 million Great Britain Pounds and 12.8 million Great Britain Pounds into fixed Hong Kong dollar denominated obligations expiring in September 2014 and December 2014, respectively, concurrent with the underlying intercompany loans.  The Company does not engage in purchasing forward exchange contracts for trading or speculative purposes.

Refer to Note 5 of the Consolidated Financial Statements for a discussion of derivative financial instruments.

Interest Rate Risk

The Company is subject to market risk from exposure to changes in interest rates based on the Company’s financing activities. As of December 31, 2013, $1,034.1 million, or 48% of the Company’s outstanding borrowings, were subject to floating interest rates, primarily LIBOR.  The Company has $600.0 million of unsecured Senior Notes due November 2014 outstanding, which were issued at 99.813% of their face value and which have a fixed interest rate of 4.75%.  The Company has $500.0 million of unsecured Senior Notes due February 2022 outstanding, which were issued at 99.746% of their face value and which have a fixed interest rate of 4.00%.

In January 2014, the Company issued $750.0 million principal amount of unsecured 2.55% Senior Notes due January 2019 at 99.846% of their face value which have which have a fixed interest rate at 2.55%.  The Company used the proceeds from the 2.55% Senior Notes to repay borrowings under its Revolving Credit Facility thus reducing its exposure to floating interest rates.

Outstanding borrowings under the Company’s Revolving Credit Facility are subject to floating interest rates, primarily LIBOR. At December 31, 2013, the Company’s average LIBOR rate was 0.17%.  A 10% change in the LIBOR interest rate at December 31, 2013 would have no material effect on interest expense. The Company does not expect changes in interest rates to have a material effect on income or cash flows in 2014, although there can be no assurances that interest rates will not significantly change.

26

Table of Contents

Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of

Amphenol Corporation

Wallingford, Connecticut

We have audited the accompanying consolidated balance sheets of Amphenol Corporation and subsidiaries (the “Company”) as of December 31, 2013 and 2012, and the related consolidated statements of income, comprehensive income, changes in equity, and cash flow for each of the three years in the period ended December 31, 2013. Our audits also included the financial statement schedule listed in the Index at Item 15.  We also have audited the Company’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management Report on Internal Control. Our responsibility is to express an opinion on these financial statements and financial statement schedule and an opinion on the Company’s internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Amphenol Corporation and subsidiaries as of December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2013, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. Also, in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on the criteria established in Internal Control — Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

/s/ DELOITTE & TOUCHE LLP

Hartford, Connecticut

February 21, 2014

27

Table of Contents

AMPHENOL CORPORATION

Consolidated Statements of Income

(dollars in thousands, except per share data)

See accompanying notes to consolidated financial statements.

28

Table of Contents

AMPHENOL CORPORATION

Consolidated Statements of Comprehensive Income

(dollars in thousands)

See accompanying notes to consolidated financial statements.

29

Table of Contents

AMPHENOL CORPORATION

Consolidated Balance Sheets

(dollars in thousands, except per share data)

See accompanying notes to consolidated financial statements.

30

Table of Contents

AMPHENOL CORPORATION

Consolidated Statements of Changes in Equity

(dollars in thousands, shares in millions)