Financial News

Fabled Copper Corp. Reports on the Davis Keays UAV Drone Mission Survey

VANCOUVER, BC / ACCESSWIRE / April 27, 2022 / Fabled Copper Corp. ("Fabled Copper" or the "Company") (CSE:FABL) (FSE:XZ7) announces the results of 2021 surface field work on it's Muskwa Copper Project. See Figure 1 below.

Figure 1 - General Property Location

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

The Project is comprised of the Neil Property and the Toro Property in British Columbia. The Company also holds rights to the Bronson Property. See Figure 2 below.

Figure 2 - Location Map

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Peter Hawley, President, CEO reports; "A total of 19 specific areas were mapped and prospected during the 2021 field season and we started the New Year by reporting our findings on the Lady Luck occurrence in the south end of the Neil Property, followed by the Mac; the 8A, Harris, the 2a and 2b, the Creek, Keays south, Belcher Creek, the Magnum Mine UAV Done Mission, the Magnum, the Neil UAV Drone Mission, the Neil, EM-1, Ram Creek and now the Davis Keays Eagle UAV Drone Mission" See Figure 2 below.

Figure 2- Neil Property, Davis Keays Eagle Location

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Preamble

Minor follow-up exploration activity took place during the 1950s and early 1960s, with activity increasing significantly during the late 1960s and early 1970s. The work resulted in recognition of numerous copper occurrences within the Neil Property, the most significant of which are the Magnum Vein (Churchill Copper) and the Eagle Vein (Davis Keays). The Lady vein system at the Lady Luck Occurrence also received minor underground development work from 1969 - 1970.

Eagle Vein - Historic Work 1967-1971

The Eagle and Harris veins at the Davis Keays copper prospect underwent surface and underground development at the same time as the Magnum Deposit from 1969-1971. The Davis Keays Eagle vein is hosted in a northeast-trending vertically-dipping quartz-carbonate shear zone that has been explored by underground development over a strike length of approximately 1,220 meters and to a depth of 460 meters. Over 22,905 feet (6,982 meters) of underground work was completed that included drifting, cross-cutting, and raising (Harrington, 2021). Drifting on the Eagle vein was carried out at four elevations:

  • The 6400 Level extends for approximately 5,700 feet (1,737 meters);
  • The 6950 Level extends for approximately 3,100 feet (945 meters);
  • The 7140 Level extends for approximately 280 feet (85 meters) and is only accessible from inside the workings; and
  • The 7300 Level extends for approximately 1,850 feet (564 meters).

Levels 6400, 6950, and 7300 extend completely through the mountain, from Caribou Creek on the west side to Eagle Creek on the east. Approximately 40 000 tons of mined material was removed and subsequently hand sorted in ore and waste piles located at the drift entrance locations (Harrington, 2021). See Figure 3 below.

Figure 3 - Old Davis Keays Eagle Vein Deposit circa 1970

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Following a change of ownership in the mid 1970s, Kam Kotia Mines developed approximately 700 meters along the Eagle vein on the 5950-level. The vein was reportedly approximately 3 meters wide and consisted of massive chalcopyrite (Harrington, 2021). Mineralized material from all of the underground work in the area was collected and ~ 58,000 tons of hand sorted mineralized material was shipped to the Bethlehem Copper smelter southwest of Kamloops,BC (Harrington, 2021).

Figure 4 - Davis Keays Eagle Target UAV Drone Survey Area

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

As part of the 2021 exploration 5 selected areas were surveyed by an Unmanned Aerial Vehicle (UAV) photogrammetry survey was conducted over the Harris, Eagle, Neil and Magnum veins by Drone North, See Figure 4 above for Davis Keays Eagle survey area.

The purpose of the UAV photogrammetry surveys were to:

(i) Generate high resolution photogrammetry datasets for the vein target to better understand bedrock controls on copper mineralization.

(ii) Generate high resolution Digital Terrain Models (DTMs) to assist with 3D modelling of the targets.

(iii) Generate baseline imagery to record current state of surface disturbance at sites that will be actively explored in coming years.

Equipment used to carry out UAV photogrammetry surveys consisted of a DJI Phantom 4 Pro v2.0 optical 20 megapixel camera drone with both a mechanical shutter and an upgraded rover L1/L2 Global Navigation Satellite System (GNSS) receiver. A multi - frequency Sunnav G10 base station was set to allow for PPK corrections of the UAV rover receiver location information. See Figure 5 below.

Figure 5 - UAV Drone Survey Equipment

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

A GNSS base station was established at the upper-level portal into the underground deposit. Ground control point (GCP) data were acquired during surveying. Sixteen terrain-following missions were completed to survey the Davis Keays Eagle target along with an additional 4 constant altitude missions on the steeper inaccessible eastern slopes. A total of 3,935 photographs acquired during surveying and the final GSD`s (resolution) were 5.78 cm for the orthomosaic and 23.10 cm for the digital surface model (DSM). See Figure 6 below.

Figure 6- UAV Davis Keays Eagle Target Survey Data Points

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Data products generated include 3-23 cm resolution color orthophoto mosaics, Digital Surface Models (DSM) and Digital Terrain Models (DTM). Hillshade models were also generated for each target area. For the Hillshade model an illumination of 315 degrees was applied. Survey grade accuracy (1-3 cm) ground control point data was also acquired at the time of the UAV survey. See Figures 7, 8 below.

Figure 7- Color Orthophoto Digital Model

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Figure 8- Hill Shade Digital Model

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

The data generated was used for in-field targeting of visual copper occurrences on the color orthophoto due to the 3 cm resolution which lead to field examination of the mineralized unit to sampling of the Magnum vein where a total of 20 samples were collect as a first pass evaluation. Press link here to view Davis Keays Eagle Vein drone flight mission.

In addition, using various filter parameters, the UAV drone survey area was evaluated for gossan occurrences which could represent alteration of sulphides. The mineral probability map for gossan shows 3 large anomalies occurring in the vicinity of the Eagle vein and to the north of it.

At present it is unsure whether this anomaly is related to alteration or due to elevated iron content in the host stratigraphy. See Figure 9 below.

Figure 9 - 2021 Davis Keays UAV Drone Gossan Anomalies

Fabled Copper Corp., Wednesday, April 27, 2022, Press release picture

Going Forwards

Using the results of the data gathered by the UAV drone mission in the 2021 field season the field crew will further sample in detail the Eagle Vein area and ground truth the gossan anomalies.

An additional release on the sampling and results of the Davis Keays Eagle vein deposit will be forth coming in the following weeks.

QA QC Procedure

Analytical results of sampling reported by Fabled Copper Corp represent rock samples submitted by Fabled Copper Corp staff directly to ALS Chemex, Vancouver, British Columbia Canada. Samples were crushed, split, and pulverized as per ALS Chemex method PREP-31, then analyzed for ME-ICP61 33 element package by four acid digestion with ICP-AES Finish. ME-GRA21 method for Au and Ag by fire assay and gravimetric finish, 30g nominal sample weight.

Over Limit Methods

For samples triggering precious metal over-limit thresholds of 10 g/t Au or 100 g/t Ag, the following is being used:

Au-GRA21 Au by fire assay and gravimetric finish with 30 g sample.

Ag-GRA21 Ag by fire assay and gravimetric finish.

Fabled Copper Corp. monitors QA/QC using commercially sourced standards and locally sourced blank materials inserted within the sample sequence at regular intervals.

About Fabled Copper Corp.

Fabled Copper is a junior mining exploration company. Its current focus is to creating value for stakeholders through the exploration and development of its existing copper properties located in northern British Columbia. The Muskwa Project comprises a total of 76 claims in two non-contiguous blocks and totals approximately 8,064.9 hectares, located in the Liard Mining Division in northern British Columbia.

Mr. Peter J. Hawley, President and C.E.O.
Fabled Copper Corp.
Phone: (819) 316-0919
peter@fabledcopper.org

For further information please contact:

info@fabledcopper.org

The technical information contained in this news release has been approved by Peter J. Hawley, P.Geo. President and C.E.O. of Fabled, who is a Qualified Person as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

The Canadian Securities Exchange does not accept responsibility for the adequacy or accuracy of this release.

Certain statements contained in this news release constitute "forward-looking information" as such term is used in applicable Canadian securities laws. Forward-looking information is based on plans, expectations and estimates of management at the date the information is provided and is subject to certain factors and assumptions, including, that the Company's financial condition and development plans do not change as a result of unforeseen events and that the Company obtains any required regulatory approvals.

Forward-looking information is subject to a variety of risks and uncertainties and other factors that could cause plans, estimates and actual results to vary materially from those projected in such forward-looking information. Some of the risks and other factors that could cause results to differ materially from those expressed in the forward-looking statements include, but are not limited to: impacts from the coronavirus or other epidemics, general economic conditions in Canada, the United States and globally; industry conditions, including fluctuations in commodity prices; governmental regulation of the mining industry, including environmental regulation; geological, technical and drilling problems; unanticipated operating events; competition for and/or inability to retain drilling rigs and other services; the availability of capital on acceptable terms; the need to obtain required approvals from regulatory authorities; stock market volatility; volatility in market prices for commodities; liabilities inherent in mining operations; changes in tax laws and incentive programs relating to the mining industry; as well as the other risks and uncertainties applicable to the Company as set forth in the Company's continuous disclosure filings filed under the Company's profile at www.sedar.com. The Company undertakes no obligation to update these forward-looking statements, other than as required by applicable law.

SOURCE: Fabled Copper Corp.



View source version on accesswire.com:
https://www.accesswire.com/699025/Fabled-Copper-Corp-Reports-on-the-Davis-Keays-UAV-Drone-Mission-Survey

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.

Use the myMotherLode.com Keyword Search to go straight to a specific page

Popular Pages

  • Local News
  • US News
  • Weather
  • State News
  • Events
  • Traffic
  • Sports
  • Dining Guide
  • Real Estate
  • Classifieds
  • Financial News
  • Fire Info
Feedback