e10vq
Table of Contents

 
 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-Q
     
þ   QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended March 31, 2007.
or
     
o   o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     .
Commission File Number: 000-30269
PIXELWORKS, INC.
(Exact name of registrant as specified in its charter)
     
OREGON   91-1761992
(State or other jurisdiction of incorporation)   (I.R.S. Employer Identification No.)
8100 SW Nyberg Road
Tualatin, Oregon 97062
(503) 454-1750

(Address of principal executive offices, including zip code,
and Registrant’s telephone number, including area code)
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the last 90 days. Yes þ No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer o            Accelerated filer þ            Non-accelerated filer o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ
Number of shares of Common Stock outstanding as of April 30, 2007: 48,846,506
 
 

 


 

PIXELWORKS, INC.
FORM 10-Q
FOR THE QUARTERLY PERIOD ENDED MARCH 31, 2007
TABLE OF CONTENTS
             
PART I – FINANCIAL INFORMATION
       
 
           
  Financial Statements.     3  
 
           
  Management’s Discussion and Analysis of Financial Condition and Results of Operations.     18  
 
           
  Quantitative and Qualitative Disclosures About Market Risk.     28  
 
           
  Controls and Procedures.     28  
 
           
PART II – OTHER INFORMATION
       
 
           
  Risk Factors.     29  
 
           
  Exhibits.     46  
 
           
SIGNATURE
       
 EXHIBIT 10.1
 EXHIBIT 31.1
 EXHIBIT 31.2
 EXHIBIT 32.1
 EXHIBIT 32.2

 


Table of Contents

PART I – FINANCIAL INFORMATION
Item 1. Financial Statements.
PIXELWORKS, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands)
(Unaudited)
                 
    March 31,     December 31,  
    2007     2006  
ASSETS
               
Current assets:
               
Cash and cash equivalents
  $ 66,607     $ 63,095  
Short-term marketable securities
    38,382       53,985  
Accounts receivable, net
    12,639       9,315  
Inventories, net
    13,892       13,809  
Prepaid expenses and other current assets
    5,731       6,374  
 
           
Total current assets
    137,251       146,578  
 
               
Long-term marketable securities
    17,510       17,504  
Property and equipment, net
    18,460       21,931  
Other assets, net
    8,706       9,287  
Debt issuance costs, net
    2,757       2,922  
Acquired intangible assets, net
    8,754       9,549  
 
           
Total assets
  $ 193,438     $ 207,771  
 
           
 
               
LIABILITIES AND SHAREHOLDERS’ EQUITY
               
 
               
Current liabilities:
               
Accounts payable
  $ 9,357     $ 8,093  
Accrued liabilities and current portion of long-term liabilities
    14,898       19,319  
Current portion of income taxes payable
    522       10,997  
 
           
Total current liabilities
    24,777       38,409  
 
               
Long-term liabilities, net of current portion
    6,786       7,414  
Income taxes payable, net of current portion
    9,851        
Long-term debt
    140,000       140,000  
 
           
Total liabilities
    181,414       185,823  
 
               
Commitments and contingencies
               
 
               
Shareholders’ equity:
               
Preferred stock
           
Common stock
    333,869       331,567  
Shares exchangeable into common stock
    114       450  
Accumulated other comprehensive loss
    (3,161 )     (3,693 )
Accumulated deficit
    (318,798 )     (306,376 )
 
           
Total shareholders’ equity
    12,024       21,948  
 
           
Total liabilities and shareholders’ equity
  $ 193,438     $ 207,771  
 
           
See accompanying notes to condensed consolidated financial statements.

3


Table of Contents

PIXELWORKS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
(Unaudited)
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Revenue, net
  $ 23,981     $ 36,559  
Cost of revenue (1)
    14,128       45,043  
 
           
Gross profit (loss)
    9,853       (8,484 )
 
               
Operating expenses:
               
Research and development (2)
    11,975       15,693  
Selling, general and administrative (3)
    7,525       10,004  
Restructuring
    2,768        
Amortization of acquired intangible assets
    90       333  
Impairment loss on acquired intangible assets
          1,753  
 
           
Total operating expenses
    22,358       27,783  
 
           
Loss from operations
    (12,505 )     (36,267 )
 
               
Interest income
    1,527       1,324  
Interest expense
    (657 )     (698 )
Amortization of debt issuance costs
    (165 )     (171 )
Gain on repurchase of long-term debt, net
          3,009  
 
           
Interest and other income, net
    705       3,464  
 
           
Loss before income taxes
    (11,800 )     (32,803 )
 
               
Provision for income taxes
    622       252  
 
           
 
               
Net loss
  $ (12,422 )   $ (33,055 )
 
           
 
               
Net loss per share — basic and diluted
  $ (0.25 )   $ (0.69 )
 
           
 
               
Weighted averages shares outstanding — basic and diluted
    48,780       47,947  
 
           
 
                 
(1) Includes:
               
Amortization of acquired developed technology
  $ 705     $ 1,972  
Restructuring
    101        
Stock-based compensation
    20       58  
Impairment loss on acquired developed technology
          21,330  
Amortization of acquired inventory mark-up
          26  
(2) Includes stock-based compensation
    670       1,231  
(3) Includes stock-based compensation
    1,033       1,511  
See accompanying notes to condensed consolidated financial statements.

4


Table of Contents

PIXELWORKS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(Unaudited)
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Cash flows from operating activities:
               
Net loss
  $ (12,422 )   $ (33,055 )
Adjustments to reconcile net loss to net cash used in operating activities:
               
Depreciation and amortization
    3,886       4,452  
Stock-based compensation
    1,723       2,800  
Amortization of acquired intangible assets
    795       2,305  
Amortization of debt issuance costs
    165       171  
Loss on asset disposals
    49       100  
Impairment losses on acquired intangible assets
          23,083  
Gain on repurchase of long-term debt, net
          (3,009 )
Other
    (66 )     41  
Changes in operating assets and liabilities:
               
Accounts receivable, net
    (3,324 )     2,879  
Inventories, net
    (83 )     2,998  
Prepaid expenses and other current and long-term assets, net
    689       879  
Accounts payable
    1,264       (3,410 )
Accrued current and long-term liabilities
    (2,181 )     (1,779 )
Income taxes payable
    (624 )     179  
 
           
Net cash used in operating activities
    (10,129 )     (1,366 )
 
           
Cash flows from investing activities:
               
Proceeds from maturities of marketable securities
    22,532       9,437  
Purchases of marketable securities
    (6,324 )     (4,131 )
Payments on asset financings
    (2,116 )     (7,159 )
Purchases of property and equipment
    (694 )     (1,200 )
Purchases of other assets
          (150 )
 
           
Net cash provided by (used in) investing activities
    13,398       (3,203 )
 
           
 
               
Cash flows from financing activities:
               
Proceeds from issuances of common stock
    243       849  
Repurchase of long-term debt
          (6,800 )
 
           
Net cash provided by (used in) financing activities
    243       (5,951 )
 
           
 
Net change in cash and cash equivalents
    3,512       (10,520 )
 
               
Cash and cash equivalents, beginning of period
    63,095       68,604  
 
           
Cash and cash equivalents, end of period
  $ 66,607     $ 58,084  
 
           
 
               
Supplemental disclosure of cash flow information:
               
Cash paid during the period for:
               
Interest
  $ 44     $ 85  
Income taxes
    1,246       58  
 
               
Supplemental disclosure of non-cash investing and financing activities:
               
Acquisitions of property and equipment and other assets under extended payment terms
  $     $ 5,451  
See accompanying notes to condensed consolidated financial statements.

5


Table of Contents

PIXELWORKS, INC.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)
(Unaudited)
NOTE 1: BASIS OF PRESENTATION
Nature of Business
Pixelworks, Inc. (“Pixelworks” or the “Company”) is an innovative designer, developer and marketer of semiconductors and software that specializes in video and pixel processing for the advanced display industry. At the core of our technology are unique techniques for intelligently processing signals on a pixel-by-pixel basis that result in images optimized for a variety of digital displays, including multimedia projectors, advanced televisions and liquid crystal display panels. Our flexible design architecture enables our technology to produce high image quality in our customers’ display products in a range of solutions, including system-on-chip integrated circuits (“ICs”) and co-processor ICs. We are headquartered in Tualatin, Oregon, with design centers in Shanghai, China and San Jose, California.
Condensed Consolidated Financial Statements
These condensed consolidated financial statements have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission. Certain information and footnote disclosures normally included in financial statements prepared in accordance with U.S. generally accepted accounting principles (“GAAP”) have been condensed or omitted pursuant to such regulations, although we believe that the disclosures provided are adequate to prevent the information presented from being misleading.
The financial information included herein for the three months ended March 31, 2007 and 2006 is unaudited; however, such information reflects all adjustments, consisting only of normal recurring adjustments, that are, in the opinion of management, necessary for a fair presentation of the financial position, results of operations and cash flows of the Company for these interim periods. The financial information as of December 31, 2006 is derived from our audited consolidated financial statements and notes thereto for the fiscal year ended December 31, 2006, included in Item 8 of our Annual Report on Form 10-K, and should be read in conjunction with such consolidated financial statements.
The results of operations for the three months ended March 31, 2007 are not necessarily indicative of the results expected for the entire fiscal year ending December 31, 2007.
Use of Estimates
The preparation of condensed consolidated financial statements in conformity with GAAP requires us to make estimates and judgments that affect the amounts reported in the financial statements and accompanying notes. Our significant estimates and judgments include those related to product returns, warranty obligations, bad debts, inventory valuation, property and equipment, valuation of share-based payments, intangible assets and income taxes. The actual results experienced by the Company could differ materially from our estimates.
Reclassifications
Certain reclassifications have been made to the 2006 condensed consolidated financial statements to conform to the 2007 presentation.

6


Table of Contents

Adoption of Accounting Pronouncement
On January 1, 2007, we adopted FASB Interpretation No. 48, Accounting for Uncertainty in Income Taxes (“FIN 48”). FIN 48 is an interpretation of SFAS 109, Accounting for Income Taxes and clarifies the accounting for uncertainty in income taxes recognized in a company’s financial statements. FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return and also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure and transition. See note 5 for additional information on income taxes.
NOTE 2: BALANCE SHEET COMPONENTS
Marketable Securities
As of March 31, 2007 and December 31, 2006, all of our short- and long-term marketable securities are classified as available-for-sale.
Unrealized holding losses on short- and long-term available-for-sale marketable securities, net of tax, were $16 and $3,097, respectively, as of March 31, 2007 and $34 and $3,611, respectively, as of December 31, 2006. These unrealized holding losses are recorded in accumulated other comprehensive loss, a component of shareholders’ equity, in the condensed consolidated balance sheets. As of March 31, 2007, we have determined that gross unrealized losses on our marketable securities were temporary based on the duration of the unrealized losses and our ability to hold such investments until recovery.
Accounts Receivable, Net
Accounts receivable are recorded at invoiced amount and do not bear interest when recorded or accrue interest when past due. We do not have any off balance sheet exposure risk related to customers. Accounts receivable are stated net of an allowance for doubtful accounts, which is maintained for estimated losses that may result from the inability of our customers to make required payments. Accounts receivable, net consists of the following:
                 
    March 31,     December 31,  
    2007     2006  
Accounts receivable, gross
  $ 13,152     $ 9,515  
Less: allowance for doubtful accounts
    (513 )     (200 )
 
           
Accounts receivable, net
  $ 12,639     $ 9,315  
 
           
During the three months ended March 31, 2007, we increased our allowance for doubtful accounts and recorded bad debt expense of $313. There were no charges against the allowance during the three months ended March 31, 2007. There was no change in our allowance for doubtful accounts during the three months ended March 31, 2006.
Inventories, Net
Inventories consist of finished goods and work-in-process, and are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis) or market (net realizable value), net of a reserve for slow-moving and obsolete items.

7


Table of Contents

Inventories, net consists of the following:
                 
    March 31,     December 31,  
    2007     2006  
Finished goods
  $ 13,900     $ 13,260  
Work-in-process
    6,177       6,499  
 
           
 
    20,077       19,759  
Less: reserve for slow-moving and obsolete items
    (6,185 )     (5,950 )
 
           
Inventory, net
  $ 13,892     $ 13,809  
 
           
The following is the change in our reserve for slow-moving and obsolete items:
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Balance at beginning of period
  $ 5,950     $ 1,396  
Provision
    1,105       1,704  
Usage:
               
Inventory utilized
    (203 )     (90 )
Inventory scrapped
    (667 )     (27 )
 
           
Total usage
    (870 )     (117 )
 
           
Balance at end of period
  $ 6,185     $ 2,983  
 
           
While we do not currently expect to be able to sell or otherwise use the reserved inventory we have on hand at March 31, 2007 based upon our forecasts and backlog, it is possible that a customer will decide in the future to purchase a portion of the reserved inventory. It is not possible for us to predict if or when this may happen, or how much we may sell. If such sales occur, we do not expect them to have a material impact on gross profit margin.
Property and Equipment, Net
Property and equipment, net consists of the following:
                 
    March 31,     December 31,  
    2007     2006  
Gross carrying amount
  $ 65,792     $ 65,925  
Less: accumulated depreciation and amortization
    (47,332 )     (43,994 )
 
           
Property and equipment, net
  $ 18,460     $ 21,931  
 
           

8


Table of Contents

Acquired Intangible Assets, Net
Acquired intangible assets, net consists of the following:
                 
    March 31,     December 31,  
    2007     2006  
Gross carrying amount:
               
Developed technology
  $ 19,170     $ 19,170  
Customer relationships
    1,689       1,689  
 
           
 
    20,859       20,859  
Less accumulated amortization:
               
Developed technology
    (10,849 )     (10,144 )
Customer relationships
    (1,256 )     (1,166 )
 
           
 
    (12,105 )     (11,310 )
 
           
Acquired intangible assets, net
  $ 8,754     $ 9,549  
 
           
Estimated future amortization expense is as follows:
         
Nine Months Ending December 31:
       
2007
  $ 2,384  
Year Ending December 31:
       
2008
    2,984  
2009
    2,336  
2010
    1,050  
 
     
 
  $ 8,754  
 
     
Accrued Liabilities and Current Portion of Long-Term Liabilities
Accrued liabilities and current portion of long-term liabilities consists of the following:
                 
    March 31,     December 31,  
    2007     2006  
Current portion of accrued liabilities for asset financings
  $ 5,344     $ 7,733  
Accrued payroll and related liabilities
    4,764       6,130  
Accrued interest payable
    1,012       399  
Reserve for warranty returns
    786       662  
Accrued commissions and royalties
    542       693  
Current portion of accrued remaining lease payments
    492       762  
Reserve for sales returns and allowances
    175       479  
Other
    1,783       2,461  
 
           
 
  $ 14,898     $ 19,319  
 
           

9


Table of Contents

The following is the change in our reserves for warranty returns and sales returns and allowances:
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Reserve for warranty returns:
               
Balance at beginning of period
  $ 662     $ 577  
Provision
    195       834  
Charge offs
    (71 )     (532 )
 
           
Balance at end of period
  $ 786     $ 879  
 
           
 
               
Reserve for sales returns and allowances:
               
Balance at beginning of period
  $ 479     $ 237  
Provision
    3       78  
Charge offs
    (307 )     (71 )
 
           
Balance at end of period
  $ 175     $ 244  
 
           
Long-Term Debt
As of March 31, 2007, we have $140,000 of convertible subordinated debentures (the “debentures”) outstanding. The debentures are due in 2024 and bear interest at a rate of 1.75% per annum, payable on May 15th and November 15th of each year.
The debentures are convertible, under certain circumstances, into our common stock at a conversion rate of 41.0627 shares of common stock per $1 principal amount of debentures for a total of 5,748,778 shares. This is equivalent to a conversion price of approximately $24.35 per share. The debentures are convertible if (a) our stock trades above 130% of the conversion price for 20 out of 30 consecutive trading days during any calendar quarter, (b) the debentures trade at an amount less than or equal to 98% of the if-converted value of the notes for five consecutive trading days, (c) a call for redemption occurs, or (d) in the event of certain other specified corporate transactions.
We may redeem some or all of the debentures for cash on or after May 15, 2011 at a price equal to 100% of the principal amount of the debentures plus accrued and unpaid interest. The holders of the debentures have the right to require us to purchase all or a portion of their debentures on May 15, 2011, May 15, 2014 and May 15, 2019 at a price equal to 100% of the principal amount plus accrued and unpaid interest.
We have filed a shelf registration statement with the SEC covering resale of the debentures and the common stock issuable upon conversion of the debentures. The registration statement was declared effective August 24, 2004. The debentures are unsecured obligations and are subordinated in right of payment to all of our existing and future senior debt.
In February 2006, we repurchased in the open market, and retired, $10,000 of our then outstanding debentures for $6,800. We recognized a gain on the repurchase of $3,200 which is included in other income in our statement of operations for the three months ended March 31, 2006, net of a $191 write-off of debt issuance costs.

10


Table of Contents

NOTE 3: STOCK-BASED COMPENSATION
Stock Option Plan
Under our 2006 Stock Incentive Plan (“2006 Plan”), 4,000,000 stock options may be granted. Options granted under the 2006 Plan must generally be exercised while the individual is an employee and within ten years of the date of grant. Our new-hire vesting schedule provides that each option becomes exercisable at a rate of 25% on the first anniversary date of the grant, and 2.083% on the last day of every month thereafter for a total of thirty-six additional increments. Our merit vesting schedule provides that options become exercisable in equal monthly installments over three years. Prior to August 2006, our merit vesting schedule provided that options became exercisable monthly for a period of four years, with 10% becoming exercisable in the first year, 20% becoming exercisable in the second year, 30% becoming exercisable in the third year and 40% becoming exercisable in the fourth year.
The following is a summary of stock option activity for the three months ended March 31, 2007:
                 
            Weighted
            average
    Number   exercise
    of shares   price
Options outstanding as of December 31, 2006
    6,844,285     $ 7.32  
Granted
    404,200       1.89  
Exercised
    (45,800 )     0.61  
Forfeited
    (897,386 )     5.82  
Expired
    (152,906 )     9.24  
 
               
Options outstanding as of March 31, 2007
    6,152,393     $ 7.18  
 
               
During the three months ended March 31, 2007, the total intrinsic value of options exercised was $58, for which no income tax benefit has been recorded. As of March 31, 2007, the total intrinsic value of options outstanding was $152, and the options had a weighted average remaining contractual term of 6.7 years.
As of March 31, 2007, there were 3,102,548 options exercisable with a weighted average exercise price of $9.72 per share, an aggregate intrinsic value of $129, and a weighted average remaining contractual term of 4.8 years.
As of March 31, 2007, there were 6,039,551 options vested and expected to vest with a weighted average exercise price of $7.23 per share, an aggregate intrinsic value of $151, and a weighted average remaining contractual term of 6.6 years.
As of March 31, 2007, 2,150,026 shares were available for grant under the 2006 Plan.
Employee Stock Purchase Plan
As of March 31, 2007, a total of 1,995,000 shares of common stock have been reserved for issuance under the Employee Stock Purchase Plan (“ESPP”). The number of shares available for issuance under the ESPP increases each year in an amount equal to the lesser of (i) the number of shares of common stock issued pursuant to the ESPP during the immediately preceding fiscal year, (ii) two percent of the outstanding shares of common stock on the first day of the year for which the increase is being made or (iii) a lesser amount determined by the Board of Directors. During the three months ended March 31,

11


Table of Contents

2007, the Company issued 145,126 shares under the ESPP for proceeds of approximately $215. As of March 31, 2007, there were 641,306 shares available for issuance under this plan.
Stock-Based Compensation Expense
The fair value of stock-based compensation was determined using the Black-Scholes option pricing model and the following weighted average assumptions:
                 
    Three Months Ended
    March 31,
    2007   2006
Stock Option Plan:
               
Risk free interest rate
    4.66 %     4.53 %
Expected dividend yield
    0 %     0 %
Expected term (in years)
    5.3       4.5  
Volatility
    72 %     76 %
 
               
Employee Stock Purchase Plan:
               
Risk free interest rate
    5.16 %     4.53 %
Expected dividend yield
    0 %     0 %
Expected term (in years)
    0.5       0.5  
Volatility
    51 %     47 %
The weighted average fair value of options granted during the three months ended March 31, 2007 and 2006 was $1.21 and $3.02 per share, respectively. The risk free interest rate is estimated using an average of treasury bill interest rates. The expected term is estimated using historical exercise behavior. The expected volatility is estimated using historical calculated volatility and considers factors such as future events or circumstances that would impact volatility.
As of March 31, 2007, unrecognized compensation cost related to unvested awards is $9,650, which is expected to be recognized over a weighted average period of 2.4 years.
NOTE 4: RESTRUCTURINGS
In April 2006, we initiated a restructuring plan to reduce our operating expenses by reducing manufacturing overhead and operating expenses and focusing on our core business. The plan included integrating the IPTV technology that we acquired from Equator with our advanced television technology product development. We are no longer pursuing other stand-alone digital media streaming markets that are not core to our business.
In November 2006, we initiated an additional restructuring plan to further reduce operating expenses. This additional plan includes further consolidation of our North American operations in order to achieve reduced compensation and rent expenses, while at the same time making critical infrastructure investments in people, process and information systems to improve our operating efficiency.
The following is a summary of restructuring expense incurred during the three months ended March 31, 2007 and the cumulative amount incurred through March 31, 2007:

12


Table of Contents

                 
    Three Months     Cumulative  
    Ended     Amount  
    March 31,     Incurred To  
    2007     March 31, 2007  
Cost of revenue — restructuring:
               
Termination and retention benefits
  $ 101     $ 148  
Licensed technology and tooling write-offs
          2,072  
 
           
 
    101       2,220  
 
               
Operating expenses — restructuring:
               
Termination and retention benefits
    2,347       5,081  
Licensed technology, software and other asset write offs
    347       8,837  
Consolidation of leased space
    8       2,100  
Other
    66       66  
 
           
 
    2,768       16,084  
 
           
Total restructuring expense
  $ 2,869     $ 18,304  
 
           
The following is a rollforward of the accrued liabilities related to the restructurings for the three months ended March 31, 2007:
                                 
    Balance as of                     Balance as of  
    December 31,     Expensed /             March 31,  
    2006     (Adjustments)     Payments     2007  
Termination and retention benefits
  $ 1,193     $ 2,448     $ (2,050 )   $ 1,591  
Lease termination costs
  1,524     (231 )   (295 )   998  
 
                       
 
                               
Total
  $ 2,717     $ 2,217     $ (2,345 )   $ 2,589  
 
                       
As we continue efforts of implementing the restructuring plan announced in November 2006, we expect to incur additional restructuring charges of $2,000 to $2,500 primarily over the remainder of 2007, consisting mostly of costs related to termination and retention benefits and the consolidation of leased space.
NOTE 5: INCOME TAXES
On January 1, 2007, we adopted FIN 48. As a result of the implementation of FIN 48, we conducted a comprehensive review of our uncertain tax positions. We did not record any adjustment to retained earnings as a result of this analysis.
As of January 1, 2007, the amount of our uncertain tax positions is a liability of $10,490. As of March 31, 2007, the amount of our uncertain tax positions is a liability of $9,920, of which $69 and $9,851 is classified as current and long-term, respectively, in accordance with FIN 48. As of December 31, 2006, prior to the adoption of FIN 48, this liability is classified as current and included in current portion of income taxes payable in our condensed consolidated balance sheet. If these positions are sustained by the taxing authorities in our favor, the reduction of the liability will reduce our effective tax rate. We

13


Table of Contents

anticipate that we will continue to accrue interest, penalties and contingent tax amounts related to these uncertain tax positions during 2007. We do not anticipate any material reductions to the amounts accrued during 2007. As of January 1, 2007, we were subject to income tax examination for the years 2003 through 2005 in a single foreign jurisdiction.
We recognize accrued interest and penalties related to uncertain tax positions in income tax expense in our statement of operations. As of January 1, 2007, we had accrued approximately $1,747 for the payment of tax-related interest and penalties.
Income tax expense for the periods ended March 31, 2007 and 2006 was recorded for continuing operations in profitable, cost-plus foreign jurisdictions, and contingent amounts related to potential tax exposures in foreign jurisdictions. As of March 31, 2007, we have recorded a valuation allowance against substantially all of our net deferred tax assets as we cannot conclude that it is more likely than not that we will be able to realize the benefit of these assets.
NOTE 6: COMPREHENSIVE LOSS
Total comprehensive loss is as follows:
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Net loss
  $ (12,422 )   $ (33,055 )
Unrealized gain on available-for-sale investments, net of tax
    532       789  
 
           
Total comprehensive loss
  $ (11,890 )   $ (32,266 )
 
           
NOTE 7: EARNINGS PER SHARE
We calculate earnings per share in accordance with SFAS 128, Earnings per Share. Basic earnings per share amounts are computed based on the weighted average number of common shares outstanding, and includes exchangeable shares. These exchangeable shares, which were issued on September 6, 2002 by Jaldi Semiconductor (“Jaldi”), our Canadian subsidiary, to its shareholders in connection with the Jaldi asset acquisition, have characteristics essentially equivalent to Pixelworks’ common stock.
Diluted weighted average shares outstanding includes the incremental number of common shares that would be outstanding assuming the exercise of certain stock options, when such exercise would have the effect of reducing earnings per share, and the conversion of our convertible debentures, using the if-converted method, when such conversion is dilutive.
For the three months ended March 31, 2007 and 2006, the following weighted average shares were excluded from the calculation of diluted weighted average shares outstanding as their effect would have been anti-dilutive because of our net loss position for the periods presented:

14


Table of Contents

                 
    Three Months Ended  
    March 31,  
    2007     2006  
Stock options
    6,638,576       9,147,164  
Conversion of debentures
    5,748,778       5,944,976  
 
           
 
    12,387,354       15,092,140  
 
           
Net loss and weighted average shares outstanding used in the calculation of diluted net loss per share were the same as the net loss and weighted average shares outstanding used in calculating basic net loss per share for the three months ended March 31, 2007 and 2006.
NOTE 8: SEGMENT INFORMATION
In accordance with SFAS 131, Disclosures about Segments of an Enterprise and Related Information, we have identified a single operating segment: the design and development of integrated circuits for use in electronic display devices. Substantially all of our assets are located in the U.S.
Geographic Information
Revenue by geographic region, attributed to countries based on the domicile of the customer, was as follows:
                 
    Three Months Ended  
    March 31,  
    2007     2006  
Japan
  $ 12,993     $ 13,057  
Taiwan
    3,025       5,061  
Korea
    2,426       4,591  
Europe
    1,648       3,110  
China
    1,402       4,726  
U.S.
    1,061       2,440  
Other
    1,426       3,574  
 
           
 
  $ 23,981     $ 36,559  
 
           
Significant Customers
Sales to distributors represented 55% and 42% of total revenue for the three months ended March 31, 2007 and 2006, respectively. One distributor accounted for 10% or more of total revenue for the three months ended March 31, 2007 and 2006. This distributor represented 32% and 21% of revenue for the three months ended March 31, 2007 and 2006, respectively.
Revenue attributable to our top five end customers represented 48% and 35% of total revenue for the three months ended March 31, 2007 and 2006, respectively. End customers include customers who purchase directly from us, as well as customers who purchase our products indirectly through distributors and manufacturers’ representatives. One end customer represented 21% and 13% of revenue for the three months ended March 31, 2007 and 2006, respectively. No other end customer represented 10% or more of revenue during those periods.

15


Table of Contents

The following accounts represented 10% or more of gross accounts receivable in at least one of the periods presented:
                 
    March 31,   December 31,
    2007   2006
Account A
    27 %     23 %
Account B
    19 %     10 %
Account C
    10 %     13 %
Account D
    6 %     10 %
NOTE 9: RISKS AND UNCERTAINTIES
Concentration of Suppliers
We do not own or operate a semiconductor fabrication facility and do not have the resources to manufacture our products internally. We rely on four third-party foundries to produce all of our products and we do not have any long-term agreements with any of these suppliers. In light of these dependencies, it is reasonably possible that failure to perform by one of these suppliers could have a severe impact on our results of operations.
Risk of Technological Change
The markets in which we compete, or seek to compete, are subject to rapid technological change, frequent new product introductions, changing customer requirements for new products and features and evolving industry standards. The introduction of new technologies and the emergence of new industry standards could render our products less desirable or obsolete, which could harm our business.
Concentrations of Credit Risk
Financial instruments that potentially subject us to concentrations of credit risk consist of cash equivalents, short- and long-term marketable securities and accounts receivable. We limit our exposure to credit risk associated with cash equivalent and marketable security balances by placing our funds in various high-quality securities and limiting concentrations of issuers and maturity dates. We limit our exposure to credit risk associated with accounts receivable by carefully evaluating creditworthiness before offering terms to customers.
NOTE 10: COMMITMENTS AND CONTINGENCIES
Indemnifications
Certain of our agreements include limited indemnification provisions for claims from third-parties relating to our intellectual property. Such indemnification provisions are accounted for in accordance with Financial Accounting Standards Board Summary of Interpretation No. 45, Guarantor’s Accounting and Disclosure Requirements for Guarantees, Including Indirect Guarantees of Indebtedness of Others-an interpretation of FASB Statements No. 5, 57, and 107 and rescission of FASB Interpretation No. 34. The amount of the indemnification is generally limited to the amount paid by the customer. As of March 31, 2007, we have not incurred any material liabilities arising from these indemnification obligations, however in the future, such obligations could immediately impact our results of operations.

16


Table of Contents

Legal Proceedings
We are subject to legal matters that arise from time to time in the ordinary course of our business. Although we currently believe that resolving such matters, individually or in the aggregate, will not have a material adverse effect on our financial position, our results of operations, or our cash flows, these matters are subject to inherent uncertainties and our view of these matters may changes in the future.

17


Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
Forward-looking Statements
This Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of this Report contain “forward-looking statements” within the meaning of the Securities Litigation Reform Act of 1995 that are based on current expectations, estimates, beliefs, assumptions and projections about our business. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates” and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve certain risks and uncertainties that are difficult to predict. Actual outcomes and results may differ materially from what is expressed or forecasted in such forward-looking statements due to numerous factors. Such factors include, but are not limited to: changes in growth in the markets in which we participate or seek to participate; changes in customer ordering patterns or lead times; the success of our products in expanded markets; our success in achieving operating efficiencies from our restructuring efforts; our ability to execute our new strategy; competitive factors, such as rival chip architectures, introduction of, or traction by, competing designs or pricing pressures; insufficient, excess or obsolete inventory and variations in inventory valuation; product mix; new product yield rates, changes in regional demand for our products, non-acceptance of the combined technologies by leading manufacturers; changes in recoverability of intangible assets and long-lived assets; increased competition; adverse economic conditions in the U.S. and internationally, including continued adverse economic conditions in the specific markets for our products; failure to design, develop and manufacture new products; lack of success in technological advancements; lack of acceptance of new products; unexpected changes in the demand for our products and services; the inability to successfully manage inventory pricing pressures; failure to reduce costs or improve operating efficiencies; changes to and compliance with international laws and regulations; currency fluctuations; and our ability to attract, hire and retain key and qualified employees.
These forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this Quarterly Report on Form 10-Q. If we do update or correct one or more of these forward-looking statements, you should not conclude that we will make additional updates or corrections with respect thereto or with respect to other forward-looking statements.
(Dollars in thousands, except per share data)
Overview
We are an innovative designer, developer and marketer of semiconductors and software that specializes in video and pixel processing for the advanced display industry. At the core of our technology are unique techniques for intelligently processing signals on a pixel-by-pixel basis that result in images optimized for a variety of digital displays, including multimedia projectors, advanced televisions and liquid crystal display panels. Our flexible design architecture enables our technology to produce high image quality in our customers’ display products in a range of solutions, including system-on-chip integrated circuits (“ICs”) and co-processor ICs.
We sell our products worldwide through a direct sales force and indirectly through distributors and manufacturers’ representatives. We sell to distributors in Japan, Taiwan, China and Europe, and our manufacturers’ representatives support some of our European and Korean sales. Sales to distributors represented 55% and 42% of total revenue for the three months ended March 31, 2007 and 2006,

18


Table of Contents

respectively. Our distributors typically provide engineering support to our end customers and often have valuable and established relationships with our end customers. In certain countries it is customary to sell to distributors. While distributor payment to us is not dependent upon the distributor’s ability to resell the product or to collect from the end customer, the distributors may provide longer payment terms to end customers than those we would offer.
Historically, significant portions of our revenue have been generated by sales to a relatively small number of end customers and distributors. End customers include customers who purchase directly from us, as well as customers who purchase our products indirectly through distributors and manufacturers’ representatives. Revenue attributable to our top five end customers represented 48% and 35% of total revenue for the three months ended March 31, 2007 and 2006, respectively.
Significant portions of our products are sold overseas. Sales outside the U.S. accounted for approximately 96% and 93% of total revenue for the three months ended March 31, 2007 and 2006, respectively. Our integrators, branded manufacturers and branded suppliers incorporate our products into systems that are sold worldwide. All revenue to date has been denominated in U.S. dollars.
In April 2006, we initiated a restructuring plan to reduce our operating expenses by reducing manufacturing overhead and operating expenses and focusing on our core business. The plan included integrating the Internet Protocol television (“IPTV”) technology that we acquired from Equator Technologies, Inc. (“Equator”) with our advanced television technology developments. We are no longer pursuing stand-alone digital media streaming markets that are not core to our business. This focus and integration has resulted in lower compensation costs and has allowed us to consolidate and reduce office space.
In November 2006, we initiated an additional restructuring plan to further reduce operating expenses. This plan includes further consolidation of our North American operations in order to achieve reduced compensation and rent expenses, while at the same time making critical infrastructure investments in people, process and information systems to improve our operating efficiency.
During the three months ended March 31, 2007, we incurred expenses of $2,869 related to the restructuring plans announced in 2006, which consists of costs associated with termination and retention benefits of $2,448 and the consolidation of leased space of $8, the write-off of certain assets of $347 and other expenses of $66. Through March 31, 2007, the cumulative amount incurred related to the restructuring plans announced in 2006 is $18,304, of which $2,220 is included in cost of revenue. As we continue implementing the restructuring plan announced in November 2006, we expect to incur additional restructuring charges of $2,000 to $2,500 primarily over the remainder of 2007.
We performed an impairment analysis as of March 31, 2006 on the intangible assets acquired from Equator and recorded impairment losses of $23,083 in the first quarter of 2006. This amount was the excess of the carrying amount over the estimated fair value of the intangible assets.
Critical Accounting Policies and Estimates
Our discussion and analysis of our financial condition and results of operations is based on our consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles (“GAAP”). The preparation of financial statements in conformity with GAAP requires us to make estimates and judgments that affect the amounts reported in the financial statements and accompanying notes. On an on-going basis, we evaluate our estimates, including those related to product returns, warranty obligations, inventories, property and equipment, intangible assets, stock-based compensation, income taxes, litigation and other contingencies. We base our estimates on historical

19


Table of Contents

experience and various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.
We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements:
Revenue Recognition. We recognize revenue in accordance with Staff Accounting Bulletin No. 104, Revenue Recognition. Accordingly, revenue is recognized when an authorized purchase order has been received, title and risk of loss have transferred, the sales price is fixed or determinable, and collectibility of the receivable is reasonably assured. This generally occurs upon shipment of the underlying merchandise.
Sales Returns and Allowances. Our customers do not have a stated right to return product except for replacement of defective products under our warranty program discussed below. However, we have accepted customer returns on a case-by-case basis as customer accommodations in the past. As a result, we provide for these returns in our reserve for sales returns and allowances. At the end of each reporting period, we estimate the reserve based on historical experience and knowledge of any applicable events or transactions.
Certain of our distributors have stock rotation provisions in their distributor agreements, which allow them to return 5-10% of the products purchased in the prior six months in exchange for products of equal value. We analyze historical stock rotations at the end of each reporting period. To date, returns under the stock rotation provisions have been nominal.
Certain distributors also have price protection provisions in their distributor agreements with us. Under the price protection provisions, we grant distributors credit if they purchased product for a specific customer and we subsequently lower the price to the customer such that the distributor can no longer earn its negotiated margin on in-stock inventory. At the end of each reporting period, we estimate a reserve for price protection credits based on historical experience and knowledge of any applicable events or transactions. The reserve for price protection is included in our reserve for sales returns and allowances.
Product Warranties. We warrant that our products will be free from defects in materials and workmanship for a period of twelve months from delivery. Warranty repairs are guaranteed for the remainder of the original warranty period. Our warranty is limited to repairing or replacing products, or refunding the purchase price.
At the end of each reporting period, we estimate a reserve for warranty returns based on historical experience and knowledge of any applicable events or transactions. While we engage in extensive product quality programs and processes, which include actively monitoring and evaluating the quality of our suppliers, should actual product failure rates or product replacement costs differ from our estimates, revisions to the estimated warranty liability may be required.
Allowance for Doubtful Accounts. We offer credit to customers after careful examination of their creditworthiness. We maintain an allowance for doubtful accounts for estimated losses that may result from the inability of our customers to make required payments. We evaluate the balance in the allowance based on our historical write-off experience and the age of outstanding receivables at the end of each reporting period. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.
Inventory Valuation. We record a reserve against our inventory for estimated obsolete, unmarketable, and otherwise impaired products by calculating the difference between the cost of inventory and the estimated

20


Table of Contents

market value based upon assumptions about future demand and market conditions. We review our inventory at the end of each reporting period for valuation issues. If actual market conditions are less favorable than those we projected at the time the reserve was recorded, additional inventory write-downs may be required.
Useful Lives and Recoverability of Equipment and Other Long-Lived Assets. In accordance with Statement of Financial Accounting Standards No. (“SFAS”) 144, Accounting for the Impairment or Disposal of Long-Lived Assets, we evaluate the remaining useful life and recoverability of equipment and other assets, including intangible assets with definite lives, whenever events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. If there is an indicator of impairment, we prepare an estimate of future, undiscounted cash flows expected to result from the use of each asset and its eventual disposition. If these cash flows are less than the carrying value of the asset, we adjust the carrying amount of the asset to its estimated fair value.
Stock-Based Compensation. In accordance with SFAS 123R, Share-Based Payment, we estimate the fair value of shared-based payments using the Black-Scholes option pricing model, which requires certain estimates, including an expected forfeiture rate and expected term of options granted. We also make decisions regarding the method of calculating expected volatilities and the risk-free interest rates used in the option-pricing model. The resulting calculated fair value of the share-based payment is recognized as compensation expense over the requisite service period, generally the vesting period. When there are any changes to the assumptions used in the option-pricing model, including fluctuations in market price of our common stock, there will be variations in calculated fair value of the share-based payments, causing variation in the compensation cost recognized.
Income Taxes. Deferred income taxes are provided for temporary differences between the amount of assets and liabilities for financial and tax reporting purposes. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. Tax contingency reserves are recorded to address potential exposures involving tax positions we have taken that could be challenged by taxing authorities. These potential exposures result from the varying applications of statutes, rules, regulations and interpretations. Our tax contingency reserves contain assumptions based on past experiences and judgments about potential actions by taxing jurisdictions. The ultimate resolution of these matters may be greater or less than the amount that we have accrued.

21


Table of Contents

Results of Operations
The following table sets forth certain financial data for the periods presented:
                                 
    Three Months Ended March 31,  
    2007     2006  
            % of             % of  
    Dollars     Revenue     Dollars     Revenue  
Revenue, net
  $ 23,981       100.0 %   $ 36,559       100.0 %
Cost of revenue
    14,128       58.9       45,043       123.2  
 
                       
Gross profit (loss)
    9,853       41.1       (8,484 )     (23.2 )
 
                               
Operating expenses:
                               
Research and development
    11,975       49.9       15,693       42.9  
Selling, general and administrative
    7,525       31.4       10,004       27.4  
Restructuring
    2,768       11.5              
Amortization of acquired intangible assets
    90       0.4       333       0.9  
Impairment loss on acquired intangible assets
                1,753       4.8  
 
                       
Total operating expenses
    22,358       93.2       27,783       76.0  
 
                       
Loss from operations
    (12,505 )     (52.1 )     (36,267 )     (99.2 )
 
                               
Interest income
    1,527       6.4       1,324       3.6  
Interest expense
    (657 )     (2.7 )     (698 )     (1.9 )
Amortization of debt issuance costs
    (165 )     (0.7 )     (171 )     (0.5 )
Gain on repurchase of long-term debt, net
                3,009       8.2  
 
                       
Interest and other income, net
    705       2.9       3,464       9.5  
 
                       
Loss before income taxes
    (11,800 )     (49.2 )     (32,803 )     (89.7 )
Provision for income taxes
    622       2.6       252       0.7  
 
                       
 
                               
Net loss
  $ (12,422 )     (51.8 )%   $ (33,055 )     (90.4 )%
 
                       
Percentages may not add due to rounding.
Revenue
Revenue decreased $12,578, or 34%, in the first quarter of 2007 compared to the first quarter of 2006. The decrease is attributable to a decrease in units sold of 35%, partially offset by an increase in average selling prices (“ASP”) of 2%.
Revenue by market as a percentage of total revenue was as follows:
                 
    Three Months Ended
    March 31,
    2007   2006
Multimedia projector
    53 %     38 %
Advanced television
    24 %     38 %
Digital streaming media devices
    16 %     14 %
LCD monitor and panel
    6 %     8 %
Other
    1 %     2 %

22


Table of Contents

Multimedia Projector
Multimedia projector revenue was down 9% in the first quarter of 2007 compared to the first quarter of 2006. This decrease resulted from a decrease in units sold of 12%, partially offset by an increase in ASP of 4%. The decrease in units sold is primarily due to timing of shipments and not due to any other market dynamics.
We expect our multimedia projector revenue for the second quarter of 2007 to be up approximately 10% to 15% from the first quarter of 2007, as our Japanese customers rebuild their inventory after managing down levels during the first quarter in anticipation of their March 31st fiscal year ends.
Advanced Television
Advanced television revenue decreased 58% in the first quarter of 2007 compared to the first quarter of 2006. This decrease resulted from a decrease in units sold of 52% and a decrease in ASP of 12%. The decrease in units sold is primarily due to a lack of new design wins, which resulted in a loss of market share. Declines in ASPs are characteristic of the industry and the markets we serve.
For the second quarter of 2007, we expect revenue from the advanced television market to be down 20% to 30% from the first quarter of 2007.
Digital Streaming Media Devices
Digital streaming media devices revenue decreased 25% in the first quarter of 2007 compared to the first quarter of 2006. This decrease is due to a decrease in ASP of 19% and a decrease in units sold of 8%. In April 2006, we initiated a plan whereby we integrated the IPTV elements of the Equator technology acquired with our advanced television technology developments. While we are continuing to provide customers with existing products, we are no longer pursuing stand-alone digital media streaming markets that are not core to our business. As a result we expect to see revenue from existing customers in this market decreasing over time as customers migrate to next generation designs from other suppliers.
We expect second quarter 2007 revenue in this market to be flat with first quarter 2007 revenue.
LCD Monitor and Panel
LCD monitor and panel revenue decreased 48% in the first quarter of 2007 compared to the first quarter of 2006. This decrease is due to a decrease in units sold of 39% and a decrease in ASP of 15%. The decrease in units sold is primarily due to our decision to focus on higher-end monitor products and the developing market for LCD panels, rather than any particular industry dynamics.
We expect second quarter 2007 LCD monitor and panel revenue to be up 100% to 150% from the first quarter of 2007.

23


Table of Contents

Other
Other revenue includes revenue from small niche markets. We do not expect other revenue to be significant in the future.
Cost of Revenue and Gross Profit (Loss)
Cost of revenue includes purchased materials, assembly, test, labor and overhead, warranty expense, royalties, provisions for slow-moving and obsolete inventory, amortization of acquired developed technology, stock-based compensation, and information technology and facilities allocations, as well as restructuring in 2007 and an impairment loss on acquired developed technology and amortization of the fair value adjustment on acquired inventory in 2006.
Gross profit in the first quarter of 2007 was 41%, compared to a gross loss of 23% in the first quarter of 2006. The increase in gross profit is primarily due to the recognition of an impairment loss on acquired developed technology of $21,330, or 58% of revenue, in the first quarter of 2006. Additionally, acquisition-related amortization and stock-based compensation, collectively, decreased to $725, or 3% of revenue, in the first quarter of 2007 compared to $2,056, or 6% of revenue, in the first quarter of 2006. We also experienced an improvement in gross profit in the first quarter of 2007 compared to the first quarter of 2006 as a result of a favorable shift in the mix of products sold and lower material costs.
Estimated amortization of developed technology is $2,115 for the nine month period ending December 31, 2007 and $2,820, $2,336 and $1,050 for the years ending December 31, 2008, 2009 and 2010, respectively.
We expect gross profit margin to be 40% to 42% in the second quarter of 2007, however, declines in gross profit margin are characteristic of our industry and the markets we serve. As such, we expect declines to occur in the future, however we cannot predict when or how severe they will be. As a result, we actively seek ways to reduce the cost to manufacture our products and to introduce new products with higher margins.
Research and Development
Research and development expense includes compensation and related costs for personnel, depreciation and amortization, fees for outside services, expensed equipment and information technology and facilities allocations.
Research and development expense decreased $3,718, or 24%, in the first quarter of 2007 compared to the first quarter of 2006 primarily due to the following:
  Compensation expense decreased $1,807 due to lower headcount in research and development personnel. As of March 31, 2007, we had 200 research and development employees compared to 255 as of March 31, 2006. This decrease is primarily due to our restructuring efforts initiated in April and November 2006.
  Outside services and non-recurring engineering and development expenses decreased $810, due to our restructuring efforts.
  Stock-based compensation decreased $561 due to the decrease in the number of employees.

24


Table of Contents

  Depreciation and amortization expense decreased $195.
  Travel and entertainment decreased $166.
We expect to continue to make investments in research and development in support of our new product development programs.
Selling, General and Administrative
Selling, general and administrative expense includes compensation and related costs for personnel, travel, outside services, sales commissions, information technology and facilities allocations, and overhead incurred in our sales, marketing, customer support, management, legal and other professional and administrative support functions.
Selling, general and administrative expense decreased $2,479, or 25%, in the first quarter of 2007 compared to the first quarter of 2006 primarily due to the following:
  Compensation expense decreased $1,091 due to a decrease in headcount in administrative and sales and marketing personnel. As of March 31, 2007, we had 137 employees in administrative, sales and marketing functions, compared to 167 employees as of March 31, 2006.
  Accounting and legal, travel and entertainment, trade show and depreciation and amortization expenses, collectively, decreased by $552. These decreases resulted from the implementation of our restructuring plans, which are focused in part on reducing operating expenses.
  Stock-based compensation expense decreased $478.
  Sales commissions decreased $260 as a result of the decrease in revenue.
  Facilities and information technology allocations decreased $136.
We expect to continue to make investments in selling, general and administrative infrastructure to support the scalability of our business systems.
Restructuring
As a result of our restructuring plans announced in 2006, we recognized $2,869 in restructuring expense in the first quarter of 2007, of which $101 is included in cost of revenue. Total restructuring expense includes $347 for the write-off of certain assets, $2,448 for termination and retention benefits, $8 for costs associated with the consolidation of leased space and $66 for other expenses related to the restructuring efforts. As of March 31, 2007, we have accrued restructuring expenses of approximately $2,589 in our consolidated balance sheet, which consist of termination and retention benefits payable of $1,591 and accrued remaining lease payments of $998.
As we continue implementing the restructuring plans, we expect to incur additional restructuring charges of $2,000 to $2,500 primarily over the remainder of 2007, consisting mostly of costs related to termination and retention benefits and the consolidation of leased space.

25


Table of Contents

Amortization of Acquired Intangible Assets
Amortization of acquired intangible assets consists of the amortization of the customer relationships intangible asset of $90 in the first quarter of 2007 and $283 in the first quarter of 2006, as well as the amortization of a trademark intangible asset of $50 in 2006. We are amortizing the customer relationships intangible asset on a straight-line basis over its useful life of 3 years. Estimated amortization expense is $269 for the nine month period ending December 31, 2007 and $164 for the year ending December 31, 2008.
Impairment Loss on Acquired Intangible Assets
We recorded customer relationships and trademark intangible assets in connection with our acquisition of Equator in June 2005. During the first quarter of 2006, we recorded an impairment loss on the customer relationships and trademark intangible assets of $1,753, which represented the excess of the carrying value over the estimated fair value of the assets. The customer relationships intangible asset is being amortized over its remaining useful life, while the trademark intangible asset was determined to have no remaining value.
Interest and Other Income, Net
Interest and other income, net includes interest income earned on cash equivalents and short- and long-term marketable securities, interest expense related to our 1.75% long-term debt, and the amortization of debt issuance costs, as well as a gain on the repurchase of long-term debt in 2006.
Interest and other income, net decreased $2,759, or 80%, in the first quarter of 2007 compared to the first quarter of 2006. This decrease is primarily due to the recognition of a gain of $3,009 in the first quarter of 2006 related to the repurchase of $10,000 of our 1.75% outstanding debentures, partially offset by an increase in interest income of $203, or 15%, which resulted from an increase in interest rates during the first quarter of 2007 compared to the first quarter of 2006.
Provision for Income Taxes
The provision for income taxes was $622 for the first quarter of 2007 and $252 for the first quarter of 2006, despite our loss before income taxes in each of the respective periods. The effective tax rates differ from the federal statutory rate primarily due to the generation of net operating loss and federal, state and foreign tax credit carryforwards, offset by the establishment of a valuation allowance against such carryforwards, and current taxes payable in profitable cost plus foreign jurisdictions as well as contingent amounts recorded related to potential exposures in foreign jurisdictions.
Liquidity and Capital Resources
As of March 31, 2007, we had cash and cash equivalents of $66,607, short- and long-term marketable securities of $55,892 and working capital of $112,474. Cash used in operations was $10,129 for the three months ended March 31, 2007 and $1,366 for the three months ended March 31, 2006. Cash used in operating activities during the first quarter of 2007 resulted primarily from the net loss incurred and an increase in accounts receivable during the quarter. Cash used in operating activities for the first quarter of 2006 resulted primarily from the net loss incurred and increased payments made on accounts payable during the quarter, partially offset by decreases in accounts receivable and inventories balances during the quarter.

26


Table of Contents

Cash provided by investing activities was $13,398 for the three months ended March 31, 2007 compared to cash used in investing activities of $3,203 for the three months ended March 31, 2006. Cash provided by investing activities for the first quarter of 2007 consisted primarily of proceeds from maturities of marketable securities partially offset by purchases of marketable securities and payments on asset financings. Cash used in investing activities for the first quarter of 2006 consisted primarily of payments on accrued balances related to asset financings and purchases of marketable securities, partially offset by proceeds from maturities of marketable securities.
Cash provided by financing activities was $243 for the three months ended March 31, 2007 compared to cash used in financing activities of $5,951 for the three months ended March 31, 2006. Cash provided by financing activities for the first quarter of 2007 consisted of proceeds from issuances of common stock from the exercise of stock options and through the employee stock purchase plan. Cash used in financing activities for the first quarter of 2006 consisted of the repurchase of long-term debt, partially offset by proceeds from issuances of common stock from the exercise of stock options and through the employee stock purchase plan.
We anticipate that our existing cash and marketable securities balances will be adequate to fund our operating and investing needs for the next twelve months and the foreseeable future. From time to time, we may evaluate acquisitions of businesses, products or technologies that compliment our business. Any such transaction, if consummated, may consume a material portion of our working capital or require the issuance of equity securities that may result in dilution to existing shareholders.
Accounts Receivable, Net
Accounts receivable, net increased to $12,639 at March 31, 2007 from $9,315 at December 31, 2006. This increase is attributable to higher revenue during the last month of the three month period ended March 31, 2007 compared to the last month of the three month period ended December 31, 2006. Average days sales outstanding increased to 47 at March 31, 2007 from 28 at December 31, 2006, due to the overall increase in accounts receivable.
Inventories, Net
Inventories, net increased to $13,892 as of March 31, 2007 from $13,809 as of December 31, 2006. Inventory turnover on an annualized basis was approximately 3.8 times as of March 31, 2007 and 4.9 times as of December 31, 2006, which represents approximately 14 weeks of inventory.
Off-Balance Sheet Arrangements
We do not have any off-balance sheet arrangements that have or are reasonably likely to have a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.
Contractual Obligations
Our contractual obligations for 2007 and beyond are included in our Annual Report on Form 10-K for the year ended December 31, 2006. Obligations for 2007 and beyond have not changed materially as of March 31, 2007, except as presented below.
Effective January 1, 2007, the Company adopted Financial Accounting Standards Board (“FASB”) Interpretation No. 48, Accounting for Uncertainty in Income Taxes. As of March 31, 2007, we have accrued uncertain tax positions of $9,981, and it is unknown when such uncertain tax positions will be resolved.

27


Table of Contents

Recent Accounting Pronouncements
In September 2006, the FASB issued SFAS 157, Fair Value Measurements (“SFAS 157”), which defines fair value, establishes a framework for measuring fair value under generally accepted accounting principles, and expands disclosures about fair value measurements. SFAS 157 is effective for the Company beginning January 1, 2008. The provisions of SFAS 157 will be applied prospectively and we are currently in the process of assessing the impact that the adoption of SFAS 157 will have on our consolidated financial statements.
In February 2007, the FASB issued SFAS 159, The Fair value Option for Financial Assets and Financial Liabilities, which permits entities to choose to measure many financial instruments and certain other items at fair value. SFAS is effective for the Company beginning January 1, 2008, with the provisions of SFAS 159 being applied prospectively. We are currently in the process of assessing the impact that the adoption of SFAS 159 will have on our consolidated financial statements.
Item 3. Quantitative and Qualitative Disclosures about Market Risk.
Our primary market risk exposure is the impact of interest rate fluctuations on interest income earned on our investment portfolio. We mitigate risks associated with such fluctuations, as well as the risk of loss of principal, by investing in high-credit quality securities and limiting concentrations of issuers and maturity dates. Derivative financial instruments are not part of our investment portfolio.
As of March 31, 2007, we had convertible subordinated debentures of $140,000 outstanding with a fixed interest rate of 1.75%. Interest rate changes affect the fair value of the debentures, but do not affect our earnings or cash flow.
All of our sales are denominated in U.S. dollars and as a result, we have relatively little exposure to foreign currency exchange risk with respect to our sales. We have employees located in offices in Canada, Japan, Taiwan and the People’s Republic of China and as such, a portion of our operating expenses are denominated in foreign currencies. Accordingly, our operating results are affected by changes in the exchange rate between the U.S. dollar and those currencies. Any future strengthening of those currencies against the U.S. dollar could negatively impact our operating results by increasing our operating expenses as measured in U.S. dollars. Currently, we do not hedge against foreign currency rate fluctuations.
Item 4. Controls and Procedures.
Our management, under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures as required by Exchange Act Rule 13a-15(d) as of the end of the period covered by this report. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the period covered by this report, these disclosure controls and procedures are effective to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms.
As part of a Company-wide initiative to replace legacy computer systems, the Company completed an implementation of a new Enterprise Resource Planning (“ERP”) system in North America during the first quarter of 2007. The ERP system was previously successfully implemented by the Company in its Asia offices. The phased-in approach the Company took to the implementation reduced the risks associated with making these changes. As a result of the implementation, internal controls related to user security,

28


Table of Contents

account structure and hierarchy, system reporting and approval procedures were modified and redesigned to conform with and support the new ERP system. Although management believes internal controls have been maintained or enhanced by the ERP system implemented during the quarter, the controls in the newly upgraded environment have not been completely tested. As such, there is a risk that deficiencies may exist that have not yet been identified and that individually could constitute significant deficiencies or in the aggregate, a material weakness. Management will be performing tests of controls relating to the new ERP environment over the course of 2007. There have been no other significant changes in the Company’s internal control over financial reporting, or in other factors, that occurred during the period covered by this quarterly report that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
PART II – OTHER INFORMATION
Item 1A. Risk Factors.
Investing in our shares of common stock involves a high degree of risk. If any of the following risks occur, the market price of our shares of common stock could decline and investors could lose all or part of their investment.
(Dollars in thousands, except per share data)
Risks Related to Our Operations
Our new strategy, targeted at markets demanding superior video and image quality, may not significantly grow revenue and margin in a timely manner or at all, which could materially adversely affect our revenue and results of operations.
As part of our overall product strategy, we have adopted a new approach, which focuses on our core competencies in pixel processing and delivering high levels of video and image quality for the advanced television and liquid crystal display (“LCD”) panel markets and other related markets, while continuing to provide industry-leading system and chip solutions for projector customers. This new strategy is intended to enable us to take advantage of several anticipated changes in flat panel display technology. We expect our customers and potential customers to release next generation LCD displays over the next couple of years. We expect these new displays to migrate from 60hz to 120hz refresh rates, to continue to move to higher resolutions such as “True High Definition,” also known as “1080p”, and to continue to grow in size. All of these changes require high quality video and image performance.
We have designed our new strategy to help us to take advantage of these expected trends and to increase our sales to developers of advanced television products. However, our expectations may not be accurate, these markets may not develop or may take longer to develop than we expect, and the developers of these products may not choose to incorporate our products into their products. In addition, we cannot assure you that our customers and potential customers will accept our products quickly enough or in sufficient volume to grow revenue and gross profit. A lack of market acceptance or insufficient market acceptance would materially and adversely affect our revenue and results of operations.
We may not realize the anticipated benefits from the restructuring efforts announced in 2006 and we may need to initiate additional restructuring efforts in the future.
Phase one of our restructuring plans, announced in April 2006, was designed to improve our breakeven point by reducing manufacturing overhead and operating expenses and focused on our core business. The second phase was announced in November 2006 and is designed to further reduce operating expenses. This plan includes additional consolidation of our North American operations in order to achieve reduced compensation and rent expenses, while at the same time, making critical infrastructure investments in people, process and information systems to improve our operations.
The plans may take longer to implement than we expect, which could impact the timing and amount of anticipated benefits. In addition, unforeseen circumstances may result in our not being able to obtain the full benefits of the restructuring plans, or our assumptions about the benefits of the plans may prove incorrect or inaccurate, leading to a reduced benefit. Finally, we cannot assure you that future restructuring efforts will not be necessary, and whether the expected benefits from any future restructuring efforts will be attained.
We have incurred substantial indebtedness as a result of the sale of convertible debentures.
As of March 31, 2007, we have $140,000 of 1.75% convertible debentures outstanding. These debt obligations are due in 2024, although the holders of debentures have the right to require us to purchase all or a portion of their debentures on May 15, 2011, May 15, 2014 and May 15, 2019. Additionally, one of the covenants of our debenture agreement can be interpreted such that if we are late with any of our

29


Table of Contents

required filings under the Securities Act of 1934, as amended (“1934 Act”), and if we fail to effect a cure within 60 days, the holders of the debentures can put the debentures back to the Company, whereby the debentures become immediately due and payable. As a result of our restructuring efforts, the Company has fewer employees to perform day-to-day controls, processes and activities and additionally, certain functions have been transferred to new employees who are not as familiar with procedures, which increase the risk that we will be unable to make timely filings in accordance with the 1934 Act.
These debentures could materially and adversely affect our ability to obtain additional debt financing for working capital, acquisitions or other purposes, limit our flexibility in planning for or reacting to changes in our business, reduce funds available for use in our operations and could make us more vulnerable to industry downturns and competitive pressures. We expect holders of the debentures to require us to purchase our outstanding debentures on May 15, 2011, the earliest date allowed by the terms of debentures. Our ability to meet our debt service obligations will be dependent upon our future performance, which will be subject to financial, business and other factors affecting our operations, some of which are beyond our control.
Because of the complex nature of our semiconductor designs and associated manufacturing processes and the rapid evolution of our customers’ product designs, we may not be able to develop new products or product enhancements in a timely manner, which could decrease customer demand for our products and reduce our revenues.
The development of our semiconductors, some of which incorporate mixed analog and digital signal processing, is highly complex. These complexities require us to employ advanced designs and manufacturing processes that are unproven. We have experienced increased development time and delays in introducing new products that have resulted in significantly less revenue than originally expected for those products. We will not always succeed in developing new products or product enhancements nor will we always do so in a timely manner. Acquisitions have significantly added to the complexity of our product development efforts. We must now coordinate very complex product development programs between multiple geographically dispersed locations. Restructuring plans have also significantly impacted our product development efforts. We may not be successful in timely delivery of new products with a reduced number of employees or with newer inexperienced employees.
Many of our designs involve the development of new high-speed analog circuits that are difficult to simulate and require physical prototypes that are not required by the primarily digital circuits we currently design. The result can be longer and less predictable development cycles, which could adversely affect our ability to retain our customers and to attract new customers.
Successful development and timely introduction of new or enhanced products depends on a number of other factors, including, but not limited to:
    accurate prediction of customer requirements and evolving industry standards, including video decoding, digital interface and content piracy protection standards;
 
    development of advanced display technologies and capabilities;
 
    timely completion and introduction of new product designs;
 
    use of advanced foundry processes and achievement of high manufacturing yields; and
 
    market acceptance of new products.
If we are not able to successfully develop and introduce products in a timely manner, our business and results of operations will be adversely affected.

30


Table of Contents

If we do not achieve additional design wins in the future, our ability to grow will be seriously limited.
Our future success depends on developers of advanced display products designing our products into their systems. To achieve design wins, we must define and deliver cost-effective, innovative and integrated semiconductors. Once a supplier’s products have been designed into a system, the developer may be reluctant to change its source of components due to the significant costs associated with qualifying a new supplier. Accordingly, the failure on our part to obtain additional design wins with leading branded manufacturers or integrators, and to successfully design, develop and introduce new products and product enhancements could harm our business, financial condition and results of operations.
Achieving a design win does not necessarily mean that a developer will order large volumes of our products. A design win is not a binding commitment by a developer to purchase our products. Rather, it is a decision by a developer to use our products in the design process of that developer’s products. Developers can choose at any time to discontinue using our products in their designs or product development efforts. If our products are chosen to be incorporated into a developer’s products, we may still not realize significant revenues from that developer if that developer’s products are not commercially successful or if that developer chooses to qualify a second source.
Because of our long product development process and sales cycles, we may incur substantial costs before we earn associated revenues and may not ultimately sell as many units of our products as we originally anticipated.
We develop products based on anticipated market and customer requirements and incur substantial product development expenditures, which can include the payment of large up-front, third-party license fees and royalties, prior to generating associated revenues. Our work under these projects is technically challenging and places considerable demands on our limited resources, particularly on our most senior engineering talent.
Because the development of our products incorporates not only our complex and evolving technology, but also our customers’ specific requirements, a lengthy sales process is often required before potential customers begin the technical evaluation of our products. Our customers typically perform numerous tests and extensively evaluate our products before incorporating them into their systems. The time required for testing, evaluation and design of our products into a customer’s system can take up to nine months or more. It can take an additional nine months before a customer commences volume shipments of systems that incorporate our products. We cannot assure you that the time required for the testing, evaluation and design of our products by our customers would not be significantly longer than nine months.
Because of this lengthy development cycle, we will experience delays between the time we incur expenditures for research and development, sales and marketing, and inventory and the time we generate revenues, if any, from these expenditures. Additionally, if actual sales volumes for a particular product are substantially less than originally anticipated, we may experience large write-offs of capitalized license fees, product masks or other capitalized or deferred product-related costs that would negatively affect our operating results.
These factors could have a material and adverse effect on our long-term business and results of operations.
The year ended December 31, 2004 was our only year of profitability since inception and we may be unable to achieve profitability in future periods.
The year ended December 31, 2004, during which we generated net income of $21,781, was our first and only year of profitability since inception. Since then, we have incurred net losses. On January 1, 2006, we

31


Table of Contents

adopted Statement of Financial Accounting Standard No. 123R, Shared-Based Payments (“SFAS 123R”), which requires all share-based payments, including grants of stock options, to be accounted for at fair value and expensed over the service period. The adoption of SFAS 123R had, and will continue to have, a significant adverse impact on our operating results.
In April 2006, we initiated a restructuring plan to reduce operating expenses by reducing manufacturing overhead and operating expenses and focusing on our core business. In November 2006, we initiated an additional restructuring plan to further reduce operating expenses. We cannot be certain these plans will be successful or that we will achieve profitability in the future or, if we do, that we can sustain or increase profitability on a quarterly or annual basis. In addition, if we are not profitable in the future, we may be unable to continue our operations.
Fluctuations in our quarterly operating results make it difficult to predict our future performance and may result in volatility in the market price of our common stock.
Our quarterly operating results have varied from quarter to quarter and are likely to vary in the future based on a number of factors related to our industry and the markets for our products that are difficult or impossible to predict. Some of these factors are not in our control and any of them may cause our quarterly operating results or the price of our common stock to fluctuate. These factors include, but are not limited to:
    demand for multimedia projectors, advanced televisions, and LCD panel products;
 
    demand and timing of orders for our products;
 
    the deferral of customer orders in anticipation of new products or product enhancements from us or our competitors or due to a reduction in our end customers’ demand;
 
    the loss of one or more of our key distributors or customers or a reduction, delay or cancellation of orders from one or more of these parties;
 
    changes in the available production capacity at the semiconductor fabrication foundries that manufacture our products and changes in the costs of manufacturing;
 
    our ability to provide adequate supplies of our products to customers and avoid excess inventory;
 
    the announcement or introduction of products and technologies by our competitors;
 
    changes in product mix, product costs or pricing, or distribution channels; and
 
    general economic conditions and economic conditions specific to the advanced display and semiconductor markets.
Fluctuations in our quarterly results could adversely affect the price of our common stock in a manner unrelated to our long-term operating performance. Because our operating results are volatile and difficult to predict, you should not rely on the results of one quarter as an indication of our future performance. Additionally, it is possible that in some future quarter our operating results will fall below the expectations of securities analysts and investors. In this event, the price of our common stock may decline significantly.
Our products are characterized by average selling prices that decline over relatively short periods of time, which will negatively affect financial results unless we are able to reduce our product costs or introduce new products with higher average selling prices.
Average selling prices for our products decline over relatively short periods of time, while many of our product costs are fixed. When our average selling prices decline, our gross profit declines unless we are able to sell more units or reduce the cost to manufacture our products. Our operating results are negatively affected when revenue or gross profit declines. We have experienced declines in our average selling prices and expect that we will continue to experience them in the future, although we cannot predict when they may occur or how severe they will be.

32


Table of Contents

Failure to manage any expansion efforts effectively could adversely affect our business and results of operations.
To manage any expansion efforts effectively in a rapidly evolving market, we must maintain and improve operational and financial systems, train and manage our employee base and attract and retain qualified personnel with relevant experience. We must also manage multiple relationships with customers, business partners, contract manufacturers, suppliers and other third parties. We could spend substantial amounts of time and money in connection with expansion efforts for which we may not realize any profit. Our systems, procedures or controls may not be adequate to support our operations and we may not be able to expand quickly enough to exploit potential market opportunities. If we do not manage expansion efforts effectively our operating expenses could increase more rapidly than our revenue, adversely affecting our financial condition and results of operations. For example, in 2005 and 2006, we invested significant amounts in research and development efforts for projects that were ultimately canceled, and for which we will not realize any revenue.
We may be unable to successfully integrate any future acquisition or equity investment we make, which could disrupt our business and severely harm our financial condition.
We may not be able to successfully integrate businesses, products, technologies or personnel of any entity that we might acquire in the future, and any failure to do so could disrupt our business and seriously harm our financial condition. In addition, if we acquire any company with weak internal controls, it will take time to get the acquired company up to the same level of operating effectiveness as Pixelworks and to implement adequate internal control, management, financial and operating reporting systems. Our inability to address these risks could negatively affect our operating results.
To date, we have acquired Panstera in January 2001, nDSP in January 2002, Jaldi in September 2002 and Equator in June 2005. In March 2003, we announced the execution of a definitive merger agreement with Genesis Microchip, Inc.; however, the merger was terminated in August 2003, and we incurred $8,949 of expenses related to the transaction. In the third quarter of 2003, we made an investment of $10,000 in Semiconductor Manufacturing International Corporation (“SMIC”). We intend to continue to consider investments in or acquisitions of complementary businesses, products or technologies.
The acquisitions of Equator, Panstera, nDSP and Jaldi contained a very high level of risk primarily because the investments were made based on in-process technological development that may not have been completed, or if completed, may not have become commercially viable.
These and any future acquisitions and investments could result in:
    issuance of stock that dilutes current shareholders’ percentage ownership;
 
    incurrence of debt;
 
    assumption of liabilities;
 
    amortization expenses related to acquired intangible assets;
 
    impairment of goodwill;
 
    large and immediate write-offs; or
 
    decreases in cash and marketable securities that could otherwise serve as working capital.
Our operation of any acquired business will also involve numerous risks, including, but not limited to:
    problems combining the acquired operations, technologies or products;

33


Table of Contents

    unanticipated costs;
 
    diversion of management’s attention from our core business;
 
    adverse effects on existing business relationships with customers;
 
    risks associated with entering markets in which we have no or limited prior experience; and
 
    potential loss of key employees, particularly those of the acquired organizations.
The acquisition of Equator required a substantial investment on our part, and unfortunately has not been as successful as we had hoped. We acquired Equator for an aggregate purchase price of $118,116 and recorded, among other assets, $57,521 in goodwill, $36,800 in acquired developed technology and $4,200 in other acquired intangible assets. However, the Equator technology itself has not proven as useful in our core markets as we had hoped, and thus we have recorded impairment losses on goodwill and intangible assets acquired from Equator. Only $7,352 of the developed technology and $433 of the customer relationships intangible assets acquired from Equator remain on our consolidated balance sheet as of March 31, 2007. Only a few of the Equator employees remain employed by us. We are no longer pursuing stand-alone digital media streaming markets, which we acquired from Equator, that are not core to our business, although we are continuing to provide customers with existing products.
We may not be able to respond to the rapid technological changes in the markets in which we compete, or seek to compete, or we may not be able to comply with industry standards in the future, making our products less desirable or obsolete.
The markets in which we compete or seek to compete are subject to rapid technological change, frequent new product introductions, changing customer requirements for new products and features, and evolving industry standards. The introduction of new technologies and emergence of new industry standards could render our products less desirable or obsolete, which could harm our business. Examples of changing industry standards include the introduction of high-definition television (“HDTV”), which includes the ATSC format in the United States, DVB format in Europe and ARIB in Japan, new video decoding technology, such as H.264 or Windows Media 9, new digital receivers and displays with resolutions that have required us to accelerate development of new products to meet these new standards.

34


Table of Contents

Because we do not have long-term commitments from our customers and plan purchases based on estimates of customer demand which may be inaccurate, we must contract for the manufacture of our products based on those potentially inaccurate estimates.
Our sales are made on the basis of purchase orders rather than long-term purchase commitments. Our customers may cancel or defer purchase orders at any time. This process requires us to make numerous forecast assumptions concerning demand, each of which may introduce error into our estimates. If our customers or we overestimate demand, we may purchase components or have products manufactured that we may not be able to use or sell. As a result, we would have excess inventory, which would negatively affect our operating results. For example, during 2005 and 2006 we overestimated demand for certain inventory which lead to relatively significant charges for obsolete inventory in 2006. Conversely, if our customers or we underestimate demand or if insufficient manufacturing capacity is available, we would forego revenue opportunities, lose market share and damage our customer relationships.
Our dependence on selling to distributors and integrators increases the complexity of managing our supply chain and may result in excess inventory or inventory shortages.
Selling to distributors and integrators reduces our ability to forecast sales and increases the complexity of our business. Since our distributors act as intermediaries between us and the companies using our products, we must rely on our distributors to accurately report inventory levels and production forecasts. Some of our products are sold to integrators, who then integrate our semiconductors into a system that is then sold to an original equipment manufacturer or “OEM.” This adds another layer between us and the ultimate source of demand for our products, the consumer. These arrangements require us to manage a more complex supply chain and monitor the financial condition and creditworthiness of our distributors, integrators and customers. Our failure to manage one or more of these challenges could result in excess inventory or shortages that could materially impact our operating results or limit the ability of companies using our semiconductors to deliver their products.
Integration of software in our products adds complexity and cost that may affect our ability to achieve design wins and may affect our profitability.
Our products incorporate software and software development tools. The integration of software adds complexity, may extend our internal development programs and could impact our customers’ development schedules. This complexity requires increased coordination between hardware and software development schedules and may increase our operating expenses without a corresponding increase in product revenue. This additional level of complexity lengthens the sales cycle and may result in customers selecting competitive products requiring less software integration.
Our software development tools may be incompatible with industry standards and challenging to implement, which could slow product development or cause us to lose customers and design wins.
Our existing products incorporate complex software tools designed to help customers bring products into production. Software development is a complex process and we are dependent on software development languages and operating systems from vendors that may compromise our ability to design software in a timely manner. Also, software development is a volatile market and new software languages are introduced to the market that may be incompatible with our existing systems and tools. New software development languages may not be compatible with our own, requiring significant engineering efforts to migrate our existing systems in order to be compatible with those new languages. Existing or new software development tools could make our current products obsolete or hard to use. Software development disruptions could slow our product development or cause us to lose customers and design wins.

35


Table of Contents

Our products could become obsolete if necessary licenses of third-party technology are not available to us or are only available on terms that are not commercially viable.
We license technology from third parties that is incorporated into our products or product enhancements. Future products or product enhancements may require additional third-party licenses that may not be available to us or may not be available on terms that are commercially reasonable. If we are unable to obtain any third-party license required to develop new products and product enhancements, we may have to obtain substitute technology of lower quality or performance standards or at greater cost, either of which could seriously harm the competitiveness of our products. We currently have access to certain key technology, owned by independent third parties, through license agreements. In the event of a change in control at the licensor, it may become difficult to attain access to such licensed technology.
Our limited ability to protect our intellectual property and proprietary rights could harm our competitive position by allowing our competitors to access our proprietary technology and to introduce similar products.
Our ability to compete effectively with other companies will depend, in part, on our ability to maintain the proprietary nature of our technology, including our semiconductor designs and software. We rely on a combination of patent, copyright, trademark and trade secret laws, as well as nondisclosure agreements and other methods, to help protect our proprietary technologies. Currently, we hold 65 patents and have 87 patent applications pending for protection of our significant technologies. Competitors in both the U.S. and foreign countries, many of whom have substantially greater resources, may apply for and obtain patents that will prevent, limit or interfere with our ability to make and sell our products, or develop similar technology independently or design around our patents. Effective copyright, trademark and trade secret protection may be unavailable or limited in foreign countries. In addition, we provide the computer programming code for our software to selected customers in connection with their product development efforts, thereby increasing the risk that customers will misappropriate our proprietary software.
We cannot assure you that the degree of protection offered by patents or trade secret laws will be sufficient. Furthermore, we cannot assure you that any patents will be issued as a result of any pending applications, or that, if issued, any claims allowed will be sufficiently broad to protect our technology. In addition, it is possible that existing or future patents may be challenged, invalidated or circumvented.
Others may bring infringement actions against us that could be time consuming and expensive to defend.
We may become subject to claims involving patents or other intellectual property rights. Intellectual property claims could subject us to significant liability for damages and invalidate our proprietary rights. In addition, intellectual property claims may be brought against customers that incorporate our products in the design of their own products. These claims, regardless of their success or merit and regardless of whether we are named as defendants in a lawsuit, would likely be time consuming and expensive to resolve and would divert the time and attention of management and technical personnel. Any future intellectual property litigation or claims also could force us to do one or more of the following:
    stop selling products using technology that contains the allegedly infringing intellectual property;
 
    attempt to obtain a license to the relevant intellectual property, which may not be available on reasonable terms or at all;
 
    attempt to redesign those products that contain the allegedly infringing intellectual property; or
 
    pay damages for past infringement claims that are determined to be valid or which are arrived at in settlement of such litigation or threatened litigation.

36


Table of Contents

If we are forced to take any of the foregoing actions, we may incur significant additional costs to, or be unable to, manufacture and sell our products, which could seriously harm our business. In addition, we may not be able to develop, license or acquire non-infringing technology under reasonable terms. These developments could result in an inability to compete for customers or could adversely affect our results of operations.
Our highly integrated products and high-speed mixed signal products are difficult to manufacture without defects and the existence of defects could result in increased costs, delays in the availability of our products, reduced sales of products or claims against us.
The manufacture of semiconductors is a complex process and it is often difficult for semiconductor foundries to produce semiconductors free of defects. Because many of our products are more highly integrated than other semiconductors and incorporate mixed analog and digital signal processing and embedded memory technology, they are even more difficult to produce without defects. Despite testing by both our customers and us, errors or performance problems may be found in existing or new semiconductors and software.
The ability to manufacture products of acceptable quality depends on both product design and manufacturing process technology. Since defective products can be caused by design or manufacturing difficulties, identifying quality problems can occur only by analyzing and testing our semiconductors in a system after they have been manufactured. The difficulty in identifying defects is compounded because the process technology is unique to each of the multiple semiconductor foundries we contract with to manufacture our products. Failure to achieve defect-free products due to their increasing complexity may result in an increase in our costs and delays in the availability of our products.
For example, we have experienced field failures of our semiconductors in certain customer system applications that required us to institute additional testing. As a result of these field failures, we incurred warranty costs due to customers returning potentially affected products. Our customers have also experienced delays in receiving product shipments from us that resulted in the loss of revenue and profits. Our customers could also seek damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend. Shipment of defective products may harm our reputation with customers, and result in loss of market share or failure to achieve market acceptance.
Dependence on a limited number of sole-source, third-party manufacturers for our products exposes us to shortages based on capacity allocation or low manufacturing yield, errors in manufacturing, price increases with little notice, volatile inventory levels and delays in product delivery, which could result in delays in satisfying customer demand, increased costs and loss of revenues.
We do not own or operate a semiconductor fabrication facility and we do not have the resources to manufacture our products internally. We contract with third-party foundries for wafer fabrication and other manufacturers for assembly and testing of our products. Our requirements represent only a small portion of the total production capacity of our contract manufacturers, who have in the past re-allocated capacity to other customers even during periods of high demand for our products. We expect this may occur again in the future. We have limited control over delivery schedules, quality assurance, manufacturing yields, potential errors in manufacturing and production costs. We do not have long-term supply contracts with our third-party manufacturers so they are not obligated to supply us with products for any specific period of time, quantity or price, except as may be provided in a particular purchase order. From time to time, our contract manufacturers increase prices charged to produce our products with little notice.

37


Table of Contents

If we are unable to obtain our products from our contract manufacturers on schedule, our ability to satisfy customer demand will be harmed, and revenue from the sale of products may be lost or delayed. If orders for our products are cancelled, expected revenues would not be realized. In addition, if the price charged by our contract manufacturers increases we will be required to increase our prices, which could harm our competitiveness. For example, in the fourth quarter of 2005, one of our contract manufacturers experienced temporary manufacturing delays due to unexpected manufacturing process problems, which caused delays in delivery of our products making it difficult for us to satisfy our customer demand.
If we have to qualify a new contract manufacturer or foundry for any of our products, we may experience delays that result in lost revenues and damaged customer relationships.
None of our products are fabricated by more than one supplier. Additionally, our products require manufacturing with state-of-the-art fabrication equipment and techniques. Because the lead-time needed to establish a relationship with a new contract manufacturer is at least nine months, and the estimated time for us to adapt a product’s design to a particular contract manufacturer’s process is typically six to nine months, there is no readily available alternative supply source for any specific product. This could cause significant delays in shipping products, which may result in lost revenues and damaged customer relationships.
We are dependent on our foundries to implement complex semiconductor technologies, which could adversely affect our operations if those technologies are unavailable, delayed or inefficiently implemented.
In order to increase performance and functionality and reduce the size of our products, we are continuously developing new products using advanced technologies that further miniaturize semiconductors. However, we are dependent on our foundries to develop and provide access to the advanced processes that enable such miniaturization. We cannot be certain that future advanced manufacturing processes will be implemented without difficulties, delays or increased expenses. Our business, financial condition and results of operations could be materially adversely affected if advanced manufacturing processes are unavailable to us, substantially delayed or inefficiently implemented.
Manufacturers of our semiconductor products periodically discontinue manufacturing processes, which could make our products unavailable from our current suppliers.
Semiconductor manufacturing technologies change rapidly and manufacturers typically discontinue older manufacturing processes in favor of newer ones. A portion of our products use embedded DRAM technology and the required manufacturing processes will only be available for a limited time. We also utilize 0.18um, 0.15um and 0.13um standard logic processes, which may only be available for the next five to seven years. Once a manufacturer makes the decision to retire a manufacturing process, notice is generally given to its customers. Customers will then either retire the affected part or develop a new version of the part that can be manufactured on the newer process. In the event that a manufacturing process is discontinued, our products could become unavailable from our current suppliers. Additionally, migrating to a new, more advanced process requires significant expenditures for research and development and takes significant time. For example in the third quarter of 2006, one of our third-party foundries discontinued the manufacturing process used to produce one of our products. While we were able to place last time buy orders, we under estimated demand for this part. As a result, we had to pay additional amounts to the foundry to restart production and we were unable to fulfill customer orders in a timely manner.

38


Table of Contents

We use a customer owned tooling, or COT, process for manufacturing many of our products which exposes us to the possibility of poor yields and unacceptably high product costs.
We are building many of our products on a customer owned tooling basis, also known in the semiconductor industry as COT, where we directly contract the manufacture of wafers and assume the responsibility for the assembly and testing of our products. As a result, we are subject to increased risks arising from wafer manufacturing yields and risks associated with coordination of the manufacturing, assembly and testing process. Poor product yields would result in higher product costs, which could make our products uncompetitive if we increased our prices or result in low gross profit margins if we did not increase our prices.
Shortages of materials used in the manufacturing of our products may increase our costs or limit our revenues and impair our ability to ship our products on time.
From time to time, shortages of materials that are used in our products may occur. In particular, we may experience shortages of semiconductor wafers and packages. If material shortages occur, we may incur additional costs or be unable to ship our products to our customers in a timely fashion, both of which could harm our business and adversely affect our results of operations.
Shortages of other key components for our customers’ products could delay our ability to sell our products.
Shortages of components and other materials that are critical to the design and manufacture of our customers’ products could limit our sales. These components include LCD panels and other display components, analog-to-digital converters, digital receivers and video decoders.
Our future success depends upon the continued services of key personnel, many of whom would be difficult to replace and the loss of one or more of these employees could seriously harm our business by delaying product development.
Our future success depends upon the continued services of our executive officers, key hardware and software engineers, and sales, marketing and support personnel, many of whom would be difficult to replace. The loss of one or more of these employees could seriously harm our business. In addition, because of the highly technical nature of our business, the loss of key engineering personnel could delay product introductions and significantly impair our ability to successfully create future products. We believe our success depends, in large part, upon our ability to identify, attract and retain qualified hardware and software engineers, and sales, marketing, finance and managerial personnel. Competition for talented personnel is intense and we may not be able to retain our key personnel or identify, attract or retain other highly qualified personnel in the future. We have experienced, and may continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Currently, this risk has increased as the Company goes through restructuring efforts to consolidate several of its North American operating sites and transition key processes and technical expertise to its Shanghai, China design center. For example, in the last six months we have been or are in the process of replacing certain officers of the Company, including the Chief Executive Officer, Chief Financial Officer and Chief Technology Officer, as we change the strategic direction of the Company and consolidate into a smaller number of operating sites. In addition during 2006, we experienced difficulties in hiring and retaining qualified engineers in our Shanghai design center. If we do not succeed in hiring and retaining employees with appropriate qualifications, our product development efforts, revenues and business could be seriously harmed.

39


Table of Contents

Decreased effectiveness of share-based payment awards could adversely affect our ability to attract and retain employees, officers and directors.
We have historically used stock options and other forms of share-based payment awards as key components of our total compensation program in order to retain employees and directors and provide competitive compensation and benefit packages. In accordance with SFAS 123R, we began recording charges to earnings for share-based payments in the first quarter of 2006. As a result, we have incurred and will continue to incur increased compensation costs associated with our share-based programs, making it more expensive for us to grant share-based payment awards to employees, officers and directors in the future. We continuously review our equity compensation strategy in light of current regulatory and competitive environments and consider changes to the program as appropriate. In addition, to the extent that SFAS 123R makes it more expensive to grant stock options or to continue to have an employee stock purchase plan, we may decide to incur cash compensation costs in the future. Actions that we take to reduce stock-based compensation expense that might be more aggressive than actions implemented by our competitors, could make it difficult to attract, retain and motivate employees, which could adversely affect our competitive position as well as our business and results of operations.
As a result of reviewing our equity compensation strategy, in 2006 we reduced the total number of options granted to employees and the number of employees who receive share-based payment awards. Additionally, in October 2006, our shareholders approved a stock option exchange program whereby eligible employees could elect to exchange eligible outstanding options for new options at the then current market price of our common stock and at a rate of 4-to-1. Effective December 4, 2006, 184 employees surrendered 1,739,920 eligible options in exchange for 434,980 new stock options. The new options have an exercise price of $2.49 per share, have a 7-year term and vest over 18 months. While the goal of this program was to aid in the retention of key employees, it is unknown what effect, if any, it will have on our ability to retain these employees.
Members of our Board of Directors and our five most highly compensated executive officers, including the Chief Executive Officer, Chief Operating Officer and Chief Financial Officer, were not eligible to participate in the stock option exchange program. The fact that these individuals could not participate in this program may make it difficult to retain those that are currently employed by us, since a majority of their outstanding stock options have exercise prices greater than the current fair market value of our common stock.
A significant amount of our revenue comes from a limited number of customers and distributors. Any decrease in revenues from, or loss of, any of these customers or distributors could significantly reduce our total revenues.
We are, and will continue to be, dependent on a limited number of distributors and customers for a substantial portion of our revenue. Sales to distributors represented 55% of total revenue for the three months ended March 31, 2007 and 52% and 46% for the years ended December 31, 2006 and 2005, respectively. Sales to Tokyo Electron Device, or TED, our Japanese distributor, represented 32% of total revenue for the three months ended March 31, 2007 and 26% and 22% for the years ended December 31, 2006 and 2005, respectively. Revenue attributable to our top five end customers represented 48% of total revenue for the three months ended March 31, 2007 and 39% and 34% for the years ended December 31, 2006 and 2005, respectively. As a result of these distributor and end customer concentrations, any one of the following factors could significantly impact our revenues:
    a significant reduction, delay or cancellation of orders from one or more of our distributors, branded manufacturers or integrators; or

40


Table of Contents

    a decision by one or more significant end customers to select products manufactured by a competitor, or its own internally developed semiconductor, for inclusion in future product generations.
The display manufacturing market is highly concentrated among relatively few large manufacturers. We expect our operating results to continue to depend on revenues from a relatively small number of customers.
The concentration of our accounts receivable with a limited number of customers exposes us to increased credit risk and could harm our operating results and cash flows.
As of March 31, 2007 and December 31, 2006, we had three and four customers, respectively, that each represented 10% or more of accounts receivable. The failure of any of these customers to pay these balances or any other customer to pay their outstanding balance would result in an operating expense and reduce our cash flows.
International sales account for almost all of our revenue, and if we do not successfully address the risks associated with our international operations, our revenue could decrease.
Sales outside the U.S. accounted for approximately 96% of total revenue for the three months ended March 31, 2007 and the years ended December 31, 2006 and 2005. We anticipate that sales outside the U.S. will continue to account for a substantial portion of our revenue in future periods. In addition, customers who incorporate our products into their products sell a substantial portion of their products outside of the U.S., and all of our products are manufactured outside of the U.S. We are, therefore, subject to many international risks, including, but not limited to:
    increased difficulties in managing international distributors and manufacturers of our products and components due to varying time zones, languages and business customs;
 
    foreign currency exchange fluctuations such as the devaluation in the currencies of Japan, People’s Republic of China (“PRC”), Taiwan or Korea that could result in an increase in our operating expenses and cost of procuring our semiconductors;
 
    potentially adverse tax consequences;
 
    difficulties regarding timing and availability of export and import licenses, which have limited our ability to freely move demonstration equipment and samples in and out of Asia;
 
    political and economic instability, particularly in the PRC, Japan, Taiwan, or Korea;
 
    reduced or limited protection of our intellectual property, significant amounts of which are contained in software, which is more prone to design piracy;
 
    increased transaction costs related to sales transactions conducted outside of the U.S., such as charges to secure letters of credit for foreign receivables;
 
    increased risk of internal control weaknesses for key processes transferred to our Asian operations;
 
    difficulties in maintaining sales representatives outside of the U.S. that are knowledgeable about our industry and products;
 
    changes in the regulatory environment in the PRC, Japan, Taiwan, Korea or Turkey that may significantly impact purchases of our products by our customers;
 
    outbreaks of SARS, bird flu or other pandemics in the PRC or other parts of Asia; and
 
    difficulties in collecting accounts receivable.

41


Table of Contents

Our growing presence and investment within the Peoples Republic of China subjects us to risks of economic and political instability in the area, which could adversely impact our results of operations.
A substantial and potentially increasing portion of our products are manufactured by foundries located in the PRC and a large number of our customers are geographically concentrated in the PRC. In addition, approximately 69% of our employees are located in this area and we have an investment of $10,000 in SMIC, located in Shanghai, China. Disruptions from natural disasters, health epidemics (including new outbreaks of SARS or bird flu) and political, social and economic instability may affect the region, and would have a negative impact on our results of operations. In addition, the economy of the PRC differs from the economies of many countries in respects such as structure, government involvement, level of development, growth rate, capital reinvestment, allocation of resources, self-sufficiency, rate of inflation and balance of payments position, among others. In the past, the economy of the PRC has been primarily a planned economy subject to state plans. Since the entry of the PRC into the World Trade Organization in 2002, the PRC government has been reforming its economic and political systems. These reforms have resulted in significant economic growth and social change. We cannot be assured that the PRC’s policies for economic reforms will be consistent or effective. Our results of operations and financial position may be harmed by changes in the PRC’s political, economic or social conditions.
The concentration of our manufacturers and customers in the same geographic region increases our risk that a natural disaster, labor strike or political unrest could disrupt our operations.
Most of our current manufacturers and customers are located in the PRC, Japan, Korea or Taiwan. The risk of earthquakes in the Pacific Rim region is significant due to the proximity of major earthquake fault lines in the area. Common consequences of earthquakes include power outages and disruption and/or impairment of production capacity. Earthquakes, fire, flooding, power outages and other natural disasters in the Pacific Rim region, or political unrest, labor strikes or work stoppages in countries where our manufacturers and customers are located likely would result in the disruption of our manufacturers’ and customers’ operations. Any disruption resulting from extraordinary events could cause significant delays in shipments of our products until we are able to shift our manufacturing from the affected contractor to another third-party vendor. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.
Environmental laws and regulations have caused us to incur, and may cause us to continue to incur, significant expenditures to comply with applicable laws and regulations, or to incur significant penalties for noncompliance.
We are subject to numerous environmental laws and regulations. Compliance with current or future environmental laws and regulations could require us to incur substantial expenses which could harm our business, financial condition and results of operation. For example, the European Parliament has finalized the Restriction on Use of Hazardous Substances Directive, or RoHS Directive, which restricts the sale of new electrical and electronic equipment containing certain hazardous substances, including lead. The European Parliament has also recently finalized the Waste Electrical and Electronic Equipment Directive, or WEEE Directive, which makes producers of electrical and electronic equipment financially responsible for specified collection, recycling, treatment and disposal of past and future covered products. We have worked and continue to work internally, with our suppliers and with our customers to ensure that products we put on the market after July 1, 2006 are compliant with the RoHS and WEEE Directives. Failure to comply with such legislation could result in our customers refusing to purchase our products and subject us to significant monetary penalties in connection with a violation, both of which could have a materially adverse effect on our business, financial condition and results of operations. These environmental laws and regulations could become more stringent over time, imposing even greater compliance costs and increasing risks and penalties associated with violations, which could seriously harm our business, financial condition and results of operation. There can be no assurance that violations of environmental

42


Table of Contents

laws or regulations will not occur in the future as a result of our inability to obtain permits, human error, equipment failure or other causes. In addition, as a result of migrating our products to be in compliance with these new laws we had to reserve for and scrap excess leaded part inventory of approximately $3,760 in 2006.
Risks Related to Our Industry
Failure of consumer demand for advanced displays and other digital display technologies to increase would impede our growth and adversely affect our business.
Our product development strategies anticipate that consumer demand for multimedia projectors, LCD panels, advanced televisions and other emerging display technologies will increase in the future. The success of our products is dependent on increased demand for these display technologies. The potential size of the market for products incorporating these display technologies and the timing of its development are uncertain and will depend upon a number of factors, all of which are beyond our control. In order for the market in which we participate to grow, advanced display products must be widely available and affordable to consumers. In the past, the supply of advanced display products has been cyclical. We expect this pattern to continue. Undercapacity in the advanced display market may limit our ability to increase our revenues because our customers may limit their purchases of our products if they cannot obtain sufficient supplies of LCD panels or other advanced display components. In addition, advanced display prices may remain high because of limited supply, and consumer demand may not grow.
If products incorporating our semiconductors are not compatible with computer display protocols, video standards and other devices, the market for our products will be reduced and our business prospects could be significantly limited.
Our products are incorporated into our customers’ products, which have different parts and specifications and utilize multiple protocols that allow them to be compatible with specific computers, video standards and other devices. If our customers’ products are not compatible with these protocols and standards, consumers will return these products, or consumers will not purchase these products, and the markets for our customers’ products could be significantly reduced. As a result, a portion of our market would be eliminated, and our business would be harmed.
Intense competition in our markets may reduce sales of our products, reduce our market share, decrease our gross profit and result in large losses.
Rapid technological change, evolving industry standards, compressed product life cycles and declining average selling prices are characteristics of our market and could have a material adverse effect on our business, financial condition and results of operations. As the overall price of advanced flat panel displays continues to fall, we may be required to offer our products to manufacturers at discounted prices due to increased price competition. At the same time, new alternative technologies and industry standards may emerge that directly compete with technologies we offer. We may be required to increase our investment in research and development at the same time that product prices are falling. In addition, even after making this investment, we cannot assure you that our technologies will be superior to those of our competitors or that our products will achieve market acceptance, whether for performance or price reasons. Failure to effectively respond to these trends could reduce the demand for our products.
We compete with specialized and diversified electronics and semiconductor companies that offer advanced display, digital TV and IPTV semiconductor products. Some of these include AMD/ATI, nVidia, Texas Instruments, Broadcom, Genesis Microchip, I-Chips, ITE, JEPICO Corp., NXP Semiconductor, Macronix, Mediatek, Micronas, MStar Semiconductor, Inc., Realtek, Renesas Technology, Sigma Designs, Silicon

43


Table of Contents

Image, Silicon Optix, STMicroelectronics, Sunplus Technology, Techwell, Topro, Trident, Trumpion, Weltrend, Zoran and other companies. Potential competitors may include diversified semiconductor manufacturers and the semiconductor divisions or affiliates of some of our customers, including Intel, LG Electronics, Matsushita Electric Industrial, Mitsubishi, National Semiconductor, NEC, Samsung Electronics, Sanyo Electric Company, Sharp Corporation, Sony Corporation and Toshiba Corporation. In addition, start-up companies may seek to compete in our markets. Many of our competitors have longer operating histories and greater resources to support development and marketing efforts. Some of our competitors may operate their own fabrication facilities. These competitors may be able to react more quickly and devote more resources to efforts that compete directly with our own. In the future, our current or potential customers may also develop their own proprietary technologies and become our competitors. Our competitors may develop advanced technologies enabling them to offer more cost-effective and higher quality semiconductors to our customers than those offered by us. Increased competition could harm our business, financial condition and results of operations by, for example, increasing pressure on our profit margin or causing us to lose sales opportunities. We cannot assure you that we can compete successfully against current or potential competitors.
The cyclical nature of the semiconductor industry may lead to significant variances in the demand for our products and could harm our operations.
In the past, the semiconductor industry has been characterized by significant downturns and wide fluctuations in supply and demand. Also, during this time, the industry has experienced significant fluctuations in anticipation of changes in general economic conditions, including economic conditions in Asia and North America. The cyclical nature of the semiconductor industry has led to significant variances in product demand and production capacity. We may experience periodic fluctuations in our future financial results because of changes in industry-wide conditions.
Other Risks
The anti-takeover provisions of Oregon law and in our articles of incorporation could adversely affect the rights of the holders of our common stock by preventing a sale or takeover of us at a price or prices favorable to the holders of our common stock.
Provisions of our articles of incorporation and bylaws and provisions of Oregon law may have the effect of delaying or preventing a merger or acquisition of us, making a merger or acquisition of us less desirable to a potential acquirer or preventing a change in our management, even if the shareholders consider the merger or acquisition favorable or if doing so would benefit our shareholders. In addition, these provisions could limit the price that investors would be willing to pay in the future for shares of our common stock. The following are examples of such provisions in our articles of incorporation or bylaws:
    our board of directors is authorized, without prior shareholder approval, to change the size of the board. Our articles of incorporation provide that if the board is increased to eight or more members, the board will be divided into three classes serving staggered terms, which would make it more difficult for a group of shareholders to quickly change the composition of our board;
 
    our board of directors is authorized, without prior shareholder approval, to create and issue preferred stock with voting or other rights or preferences that could impede the success of any attempt to acquire us or change our control, commonly referred to as “blank check” preferred stock;
 
    members of our board of directors can only be removed for cause;
 
    the board of directors may alter our bylaws without obtaining shareholder approval; and
 
    shareholders are required to provide advance notice for nominations for election to the board of directors or for proposing matters to be acted upon at a shareholder meeting.

44


Table of Contents

Our principal shareholders have significant voting power and may take actions that may make it more difficult to sell our shares at a premium to take over candidates.
Our executive officers, directors and other principal shareholders, in the aggregate, beneficially own 15,440,770 shares or approximately 32% of our outstanding common stock and exchangeable shares as of April 30, 2007. These shareholders currently have, and will continue to have, significant influence with respect to the election of our directors and approval or disapproval of our significant corporate actions. This influence over our affairs might be adverse to the interest of our other shareholders. In addition, the voting power of these shareholders could have the effect of delaying or preventing a change in control of our business or otherwise discouraging a potential acquirer from attempting to obtain control of us, which could prevent our other shareholders from realizing a premium over the market price for their common stock.
The price of our common stock has and may continue to fluctuate substantially.
Investors may not be able to sell shares of our common stock at or above the price they paid due to a number of factors, including, but not limited to:
    actual or anticipated fluctuations in our operating results;
 
    actual reduction in our operating results due solely to the adoption of SFAS 123R, which requires, among other things, the expensing of stock options which began January 1, 2006;
 
    changes in expectations as to our future financial performance;
 
    changes in financial estimates of securities analysts;
 
    announcements by us or our competitors of technological innovations, design wins, contracts, standards or acquisitions;
 
    the operating and stock price performance of other comparable companies;
 
    announcements of future expectations by our customers;
 
    changes in market valuations of other technology companies; and
 
    inconsistent trading volume levels of our common stock.
In particular, the stock prices of technology companies similar to us have been highly volatile. Market fluctuations as well as general economic, political and market conditions, including recessions, interest rate changes or international currency fluctuations, may negatively impact the market price of our common stock. Therefore, the price of our common stock may decline, and the value of your investment may be reduced regardless of our performance.
We may be unable to meet our future capital requirements, which would limit our ability to grow.
We believe our current cash and marketable security balances will be sufficient to meet our capital requirements for the next twelve months. However, we may need, or could elect to seek, additional funding prior to that time. To the extent that currently available funds are insufficient to fund our future activities, we may need to raise additional funds through public or private equity or debt financing. Additional funds may not be available on terms favorable to us or our shareholders. Furthermore, if we issue equity securities, our shareholders may experience additional dilution or the new equity securities may have rights, preferences or privileges senior to those of our common stock. If we cannot raise funds on acceptable terms, we may not be able to develop or enhance our products, take advantage of future opportunities or respond to competitive pressures or unanticipated requirements.
For example, as of March 31, 2007 we have $140,000 of unsecured convertible bonds outstanding that have a put date of May 15, 2011 and $122,499 in cash and marketable securities. Accordingly, we are in

45


Table of Contents

a net cash deficit position. While the Company has implemented restructuring plans designed to improve the financial performance of the Company, there can be no guarantee that the Company will be able to generate sufficient cash flows from operations in the future to refinance or service the potential put option on the convertible bonds.
Continued compliance with new regulatory and accounting requirements will be challenging and require significant resources.
We are spending a significant amount of management time and external resources to comply with changing laws, regulations and standards relating to corporate governance and public disclosure, including the Sarbanes-Oxley Act of 2002, new Securities and Exchange Commission rules and regulations and NASDAQ Global Market rules. In particular, Section 404 of the Sarbanes-Oxley Act of 2002 requires management’s annual review and evaluation of our internal control over financial reporting, and attestation of the effectiveness of our internal control over financial reporting by our independent registered public accounting firm. The process of documenting and testing our controls over financial reporting has required that we hire additional personnel and outside services and has resulted in additional accounting and legal expenses. While we invested significant time and money in our effort to evaluate and test our internal control over financial reporting, a material weakness was identified in our internal control over financial reporting in 2004. In addition, there are inherent limitations to the effectiveness of any system of internal controls and procedures, including cost limitations, the possibility of human error, judgments and assumptions regarding the likelihood of future events, and the circumvention or overriding of the controls and procedures. Accordingly, even effective disclosure controls and procedures can provide only reasonable assurance of achieving their control objectives.
As part of our restructuring efforts to reduce operating expenses and to support migrating engineering design capability to Asia, we have and are continuing to transition key finance and information technology infrastructure and technical expertise to our Shanghai site which may raise the risk of weakness in our internal control environment.
Item 6. Exhibits.
     
10.1
  Pixelworks, Inc. 2007 Senior Management Bonus Plan. +
31.1
  Certification of Chief Executive Officer.
31.2
  Certification of Chief Financial Officer.
32.1
  Certification of Chief Executive Officer.
32.2
  Certification of Chief Financial Officer.
 
+   Indicates a management contract or compensation arrangement.

46


Table of Contents

SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
         
 
  PIXELWORKS, INC.    
 
       
Dated: May 10, 2007
  /s/ Richard M. Brooks    
 
       
 
  Richard M. Brooks    
 
  Interim Chief Financial Officer    

47