FORWARD-LOOKING INFORMATION

This Annual Report on Form 10-K contains information about us, some of which includes “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are statements other than historical information or statements about our current condition. You can identify forward-looking statements by the use of terms such as “believes,” “contemplates,” “expects,” “may,” “will,” “could,” “should,” “would,” or “anticipates,” other similar phrases, or the negatives of these terms.

We have based the forward-looking statements relating to our operations on our current expectations, estimates and projections about us and the markets we serve. We caution you that these statements are not guarantees of future performance and involve risks and uncertainties. These statements should be considered in conjunction with the discussion in Part I, the information set forth under Item 1A, “Risk Factors” and with the discussion of the business included in Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” We have based many of these forward-looking statements on assumptions about future events that may prove to be inaccurate. Accordingly, our actual outcomes and results may differ materially from what we have expressed or forecast in the forward-looking statements. Any differences could result from a variety of factors, including the following:

Part I

Reference herein to “Crane”, “we”, “us”, and “our” refer to Crane Co. and its subsidiaries unless the context specifically states or implies otherwise. Amounts in the following discussion are presented in millions, except employee, share and per share data, or unless otherwise stated.

Item 1. Business.

We are a diversified manufacturer of highly engineered industrial products. Comprised of five segments – Aerospace & Electronics, Engineered Materials, Merchandising Systems, Fluid Handling and Controls – our businesses give us a substantial presence in focused niche markets, producing attractive returns and excess cash flow. Our primary markets are aerospace, defense electronics, non-residential construction, recreational vehicle (“RV”), transportation, automated merchandising, chemical, pharmaceutical, oil, gas, power, nuclear, building services and utilities.

Since our founding in 1855, when R.T. Crane resolved “to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just toward employees, and to put my whole mind upon the business,” we have been committed to the highest standards of business conduct.

Our strategy is to grow the earnings and cash flows of niche businesses with leading market shares, acquire businesses that fit strategically with existing businesses, aggressively pursue operational and strategic linkages among our businesses, build a performance culture focused on productivity and continuous improvement, continue to attract and retain a committed management team whose interests are directly aligned with those of our shareholders and maintain a focused, efficient corporate structure.

We use a comprehensive set of business processes and operational excellence tools that we call the Crane Business System to drive continuous improvement throughout our businesses. Beginning with a core value of integrity, the Crane Business System incorporates “Voice of the Customer” teachings (specific processes designed to capture our customers’ requirements) and a broad range of operational excellence tools into a disciplined strategy deployment process that drives profitable growth by focusing on continuously improving safety, quality, delivery and cost.

We employ approximately 11,000 people in North and South America, Europe, the Middle East, Asia and Australia. Revenues from outside the United States were approximately 42% and 40% in 2011 and 2010, respectively.

Business Segments

For additional information on recent business developments and other information about us and our business, you should refer to the information set forth under the captions, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” in Part II, Item 7 of this report, as well as in Part II, Item 8 under Note 13, “Segment Information,” to the Consolidated Financial Statements for sales, operating profit and assets employed by each segment.

Aerospace & Electronics

The Aerospace & Electronics segment has two groups, the Aerospace Group and the Electronics Group. This segment supplies critical components and systems, including original equipment and aftermarket parts, for both the commercial and military aerospace industries. The commercial market accounted for approximately 63% of segment sales in 2011, while sales to the military market were approximately 37% of total sales.

The Aerospace Group’s products are organized into the following solution sets which are designed, manufactured and sold under their respective brand names: Landing Systems (Hydro-Aire), Sensing and Utility Systems (ELDEC), Fluid Management (Lear Romec) and Cabin Systems (P.L. Porter). The Electronics Group products are organized into the following solution sets: Power Solutions (ELDEC, Keltec and Interpoint), Microwave Systems (Signal Technology and Merrimac) and Microelectronics (Interpoint).

The Landing Systems solution set includes aircraft brake control and anti-skid systems, including electro-hydraulic servo valves and manifolds, embedded software and rugged electronic controls, hydraulic control valves, landing gear sensors, and electrical braking as original equipment to the commercial transport, business, regional, general aviation, military and government aerospace, repair and overhaul markets. This solution set also includes similar systems for the retrofit of aircraft with improved systems as well as replacement parts for systems installed as original equipment by aircraft manufacturers. All of these solution sets are proprietary to us and are custom designed to the requirements and specifications of the aircraft manufacturer or program contractor. These systems and replacement parts are sold directly to aircraft manufacturers, Tier 1 integrators (companies which make products specifically for an aircraft manufacturer), airlines, governments and aircraft maintenance, repair and overhaul (“MRO”) organizations. Manufacturing for Landing Systems is located in Burbank, California.

The Sensing and Utility Systems solution set includes custom position indication and control systems, proximity sensors, and pressure sensors for the commercial business, regional and general aviation, military, MRO and electronics markets. These products are custom designed for specific aircraft to meet technically demanding requirements of the aerospace industry. Our Sensing and Utility Systems products are manufactured at facilities in Lynnwood, Washington and Lyon, France.

Our Fluid Management solution set includes lubrication and fuel pumps and fuel flow meters for aircraft and radar cooling systems for the commercial and military aerospace industries. It also includes fuel boost and transfer pumps for commuter and business aircraft. Our Fluid Management products are manufactured at three facilities located in Elyria, Ohio; Burbank, California; and Lynnwood, Washington.

Our Cabin Systems solution set includes motion control products for airline seating. We manufacture both electromechanical actuation and hydraulic/mechanical actuation solutions for aircraft seating, selling directly to seat manufacturers and to the airlines. Our Cabin Systems solutions are primarily manufactured in Burbank, California.

Our Power solution set includes custom low voltage and high voltage power supplies, miniature (hybrid) power modules, battery charging systems, transformer rectifier units (“TRUs”), high power

traveling wave tube (“TWT”) transmitters and power for TWT and solid state transmitters and amplifiers for a broad array of applications predominantly in the defense, commercial aerospace and space markets. These products are used to provide power for avionics, weapons systems, radar, electronic warfare suites, communications systems, data links, aircraft utilities systems, emergency power, bulk ac/dc power conversion and motor pulse power. Products range from standard modules to full custom designed power management and distribution systems. We supply our products to commercial aerospace and space prime contractors, Tier 1 integrators and U.S. Department of Defense prime contractors and foreign allied defense organizations. Facilities are located in Redmond and Lynnwood, Washington; Ft. Walton Beach, Florida; and Kaohsiung, Taiwan.

Our Microwave Systems solution set includes sophisticated electronic radio frequency components and subsystems and specialty components and materials. These products are used in defense and space electronics applications that include radar, electronic warfare suites, communications systems and data links. We supply many U.S. Department of Defense prime contractors and foreign allied defense organizations with products that enable missile seekers and guidance systems, aircraft sensors for tactical and intelligence applications, surveillance and reconnaissance missions, communications and self-protect capabilities for naval vessels, sensors and communications capability on unmanned aerial systems and applications for combat troops. Facilities are located in Beverly, Massachusetts; Chandler, Arizona; West Caldwell, New Jersey; San Jose, Costa Rica; and Norwalk, Connecticut.

Our Microelectronics solution set, headquartered in Redmond, Washington, designs, manufactures and sells custom miniature (hybrid) electronic circuits for applications in medical, military and commercial aerospace industries.

The Aerospace & Electronics segment employed approximately 2,800 people and had assets of $514 million at December 31, 2011. The order backlog totaled $411 million and $432 million at December 31, 2011 and 2010, respectively.

Engineered Materials

The Engineered Materials segment manufactures fiberglass-reinforced plastic panels for the transportation industry, in refrigerated and dry-van trailers and truck bodies, RVs, industrial building applications and the commercial construction industry for food processing, restaurants and supermarket applications. Engineered Materials sells the majority of its products directly to trailer and RV manufacturers and uses distributors and retailers to serve the commercial construction market. Manufacturing facilities are located in Joliet, Illinois; Jonesboro, Arkansas; Florence, Kentucky; Goshen, Indiana; and Alton, England.

The Engineered Materials segment employed approximately 630 people and had assets of $245 million at December 31, 2011. The order backlog totaled $11 million and $12 million at December 31, 2011 and 2010, respectively.

Merchandising Systems

The Merchandising Systems segment is comprised of two businesses, Vending Solutions and Payment Solutions.

Our Vending Solutions business, which is primarily engaged in the design and manufacture of vending equipment and related sol-

utions, creates customer value through innovation by improving consumer experience and store profitability. Our products, which include a full line of vending options, including those for food, snack, coffee and cold beverages, are sold to vending operators and food and beverage companies throughout the world. Vending Solutions has leading positions in both the direct and indirect distribution channels. Our solutions include vending management software and online solutions to help customers operate their businesses more profitably, become more competitive and increase cash flow for continued business investment. During 2009, facility consolidation activities resulted in the closure of the St. Louis, Missouri manufacturing facility. Consolidation activities were completed in 2010. Production facilities for Vending Solutions are located in Williston, South Carolina and Chippenham, England.

Our Payment Solutions business provides high technology products serving four global vertical markets: Retail, Vending, Gaming and Transportation. Our payment systems solutions for these markets include coin accepters and dispensers, coin hoppers, coin recyclers, bill validators and bill recyclers. Major facilities are located in Manchester, England; Buxtehude, Germany; Concord, Ontario, Canada; Kiev, Ukraine; and Salem, New Hampshire.

The Merchandising Systems segment employed approximately 1,680 people and had assets of $409 million at December 31, 2011. Order backlog totaled $15 million and $30 million at December 31, 2011 and 2010, respectively.

Fluid Handling

The Fluid Handling segment is a provider of highly engineered fluid handling equipment, such as valves, lined pipe and pumps, for critical performance applications that require high reliability. The segment operates through vertically focused end-market businesses consisting of the Crane Valve Group (“Valve Group”), Crane Pumps & Systems and Crane Supply.

The Valve Group business includes: Crane ChemPharma Flow Solutions (“Crane ChemPharma”), Crane Energy Flow Solutions (“Crane Energy”) and Building Services & Utilities.

The Valve Group is a global manufacturer of critical on/off process valves for demanding applications in industrial end markets, as well as innovative valves, coupling and gas components for commercial construction and utilities end markets. Products and services include a wide variety of valves, corrosion-resistant plastic-lined pipe, pipe fittings, couplings, connectors, actuators and valve testing. Markets served include the chemical processing, pharmaceutical, oil and gas, power, nuclear, mining, water and wastewater, general industrial and commercial construction industries. Products are sold under the trade names Crane, Saunders, Jenkins, Pacific, Xomox, Krombach, DEPA, ELRO, REVO, Flowseal, Centerline, Stockham, Wask, Viking Johnson, IAT, Hattersley, NABIC, Sperryn, Wade, Rhodes, Brownall, Resistoflex, Duochek and WTA. Facilities and sales/service centers are located in the United States, as well as in Australia, Austria, Canada, China, England, Finland, France, Germany, Hungary, India, Indonesia, Italy, Japan, Kingdom of Saudi Arabia, Mexico, the Netherlands, Northern Ireland, Russia, Singapore, Slovenia, South Korea, Spain, Sweden, Taiwan, United Arab Emirates and Wales.

Crane Pumps & Systems manufactures pumps under the trade names Deming, Weinman, Burks and Barnes. Pumps are sold to a

broad customer base that includes industrial, municipal, and commercial water and wastewater, commercial heating, ventilation and air-conditioning industries, original equipment manufacturers and military applications. Crane Pumps & Systems has facilities in Piqua, Ohio; Bramalea, Ontario, Canada; and Zhejiang, China.

Crane Supply, a distributor of valves, fittings, piping and plumbing supplies, maintains 31 distribution facilities throughout Canada.

The Fluid Handling segment employed approximately 5,150 people and had assets of $909 million at December 31, 2011. Order backlog totaled $314 million and $272 million at December 31, 2011 and 2010, respectively.

Controls

The Controls segment provides customer solutions for sensing and control applications and has special expertise in control solutions for difficult and hazardous environments. It includes three businesses: Barksdale (valves and pressure, temperature and level sensors); Azonix (ultra-rugged computers, mobile rugged displays, measurement and control systems and intelligent data acquisition products); and Crane Environmental (specialized water purification solutions).

The Controls segment employed approximately 440 people and had assets of $64 million at December 31, 2011. Order backlog totaled $27 million and $22 million at December 31, 2011 and 2010, respectively.

Acquisitions

We have completed seven acquisitions since the beginning of 2007.

In July 2011, we completed the acquisition of W. T. Armatur GmbH & Co. KG (“WTA”), a manufacturer of bellows sealed globe valves, as well as certain types of specialty valves, for chemical, fertilizer and thermal oil applications for a purchase price of $37 million in cash, and $1 million of assumed debt. WTA’s 2010 sales were approximately $21 million. WTA is being integrated into Crane ChemPharma within our Fluid Handling segment. Goodwill for this acquisition amounted to $12 million.

During 2010, we completed two acquisitions at a total cost of approximately $144 million, including the repayment of $3 million of assumed debt. Goodwill for the 2010 acquisitions amounted to $51 million.

In December 2010, we completed the acquisition of Money Controls, a leading producer of a broad range of payment systems and associated products for the gaming, amusement, transportation and retail markets. Money Controls’ 2010 full-year sales were approximately $64 million, and the purchase price was approximately $90 million, net of cash acquired of $3 million. Money Controls is being integrated into the Payment Solutions business within our Merchandising Systems segment.

In February 2010, we completed the acquisition of Merrimac Industries, Inc. (“Merrimac”), a designer and manufacturer of RF Microwave components, subsystem assemblies and micro-multifunction modules. Merrimac’s 2009 sales were approximately $32 million, and the aggregate purchase price was $54 million in cash, including the repayment of $3 million of assumed debt. Merrimac has been integrated into the Electronics Group within our Aerospace & Electronics segment.

During 2008, we completed two acquisitions at a total cost of $79 million in cash and the assumption of $17 million of net debt. Goodwill for the 2008 acquisitions amounted to $14 million.

In December 2008, we acquired all of the capital stock of the Krombach Group of Companies (“Krombach”). Krombach is a leading manufacturer of specialty valve flow solutions for the power, oil and gas, and chemical markets. Krombach’s 2008 full year sales were approximately $100 million, and the purchase price was $51 million in cash and the assumption of $17 million of net debt. Krombach has been integrated into the Crane Energy business within our Fluid Handling segment.

In September 2008, we acquired all of the capital stock of Delta Fluid Products Limited (“Delta”), a leading designer and manufacturer of regulators and fire safe valves for the gas industry, and safety valves and air vent valves for the building services market, for $28 million in cash. Delta had full year sales of $39 million in 2008 and has been integrated into the Building Services & Utilities business within our Fluid Handling segment.

During 2007, we completed two acquisitions at a total cost of $65 million. Goodwill for the 2007 acquisitions amounted to $29 million.

In September 2007, we acquired the composite panel business of Owens Corning, which produces, among other products, high gloss fiberglass-reinforced plastic panels used in the manufacture of RVs. The purchase price was $38 million in cash. The acquired business had $40 million of sales in 2006 and has been integrated into our Engineered Materials segment.

In August 2007, we acquired the Mobile Rugged Business of Kontron America, Inc., which produces computers, electronics and flat panel displays for harsh environment applications. The purchase price was $26.6 million. The acquired business had sales of $25 million in 2006 and has been integrated into the Azonix business within our Controls segment.

Divestitures

In July 2010, we sold Wireless Monitoring Systems (“WMS”) to Textron Systems for $3 million. WMS was included in our Controls segment. WMS had sales of $3 million in 2009.

During 2009, we sold General Technology Corporation (“GTC”) to IEC Electronics Corp. for $14 million. GTC, also known as Crane Electronic Manufacturing Services, was included in our Aerospace & Electronics segment, as part of the Electronics Group. GTC had $26 million in sales in 2009.

In December 2007, together with our partner, Emerson Electric Co., we sold the Industrial Motion Control, LLC (“IMC”) joint venture, generating proceeds to us of $33 million. Our investment in IMC was $29 million.

Competitive Conditions

Our lines of business are conducted under highly competitive conditions in each of the geographic and product areas they serve. Because of the diversity of the classes of products manufactured and sold, they do not compete with the same companies in all geographic or product areas. Accordingly, it is not possible to estimate the precise number of competitors or to identify our competitive

position, although we believe that we are a principal competitor in many of our markets. Our principal method of competition is production of quality products at competitive prices delivered in a timely and efficient manner.

Our products have primary application in the aerospace, defense electronics, non-residential construction, RV, transportation, automated merchandising, chemical, pharmaceutical, oil, gas, power, nuclear, building services and utilities. As such, our revenues are dependent upon numerous unpredictable factors, including changes in market demand, general economic conditions and capital spending. Because these products are also sold in a wide variety of markets and applications, we do not believe we can reliably quantify or predict the possible effects upon our business resulting from such changes.

Our engineering and product development activities are directed primarily toward improvement of existing products and adaptation of existing products to particular customer requirements as well as the development of new products. We own numerous patents, trademarks, copyrights, trade secrets and licenses to intellectual property, no one of which is of such importance that termination would materially affect our business. From time to time, however, we do engage in litigation to protect our intellectual property.

Research and Development

Research and development costs are expensed when incurred. These costs were $64.2 million, $65.9 million and $98.7 million in 2011, 2010 and 2009, respectively, and were incurred primarily by the Aerospace & Electronics segment.

Our Customers

No customer accounted for more than 10% of our consolidated revenues in 2011, 2010 or 2009.

Raw Materials

Our manufacturing operations employ a wide variety of raw materials, including steel, copper, cast iron, electronic components, aluminum, plastics and various petroleum-based products. We purchase raw materials from a large number of independent sources around the world. Although market forces have generally caused increases in the costs of steel, copper and petroleum-based products, there have been no raw materials shortages that have had a material adverse impact on our business, and we believe that we will generally be able to obtain adequate supplies of major raw material requirements or reasonable substitutes at reasonable costs.

Seasonal Nature of Business

Our business does not experience significant seasonality.

Government Contracts

We have agreements relating to the sale of products to government entities, primarily involving products in our Aerospace & Electronics segment and our Fluid Handling segment. As a result, we are subject to various statutes and regulations that apply to companies doing business with the government. The laws and regulations governing government contracts differ from those governing private contracts. For example, some government contracts require

disclosure of cost and pricing data and impose certain sourcing conditions that are not applicable to private contracts. Our failure to comply with these laws could result in suspension of these contracts, criminal or civil sanctions, administrative penalties and fines or suspension or debarment from government contracting or subcontracting for a period of time. For a further discussion of risks related to compliance with government contracting requirements; please refer to “Item 1A. Risk Factors.”

Financing

In September 2007, we entered into a five-year, $300 million Amended and Restated Credit Agreement (as subsequently amended, the “facility”), which is due to expire on September 26, 2012. The facility allows us to borrow, repay, or to the extent permitted by the agreement, prepay and re-borrow at any time prior to the stated maturity date, and the loan proceeds may be used for general corporate purposes including financing for acquisitions. Interest is based on, at our option, (1) a LIBOR-based formula that is dependent in part on the Company’s credit rating (LIBOR plus 105 basis points as of the date of this Report; up to a maximum of LIBOR plus 145 basis points), or (2) the greatest of (i) the JPMorgan Chase Bank, N.A.’s prime rate, (ii) the Federal Funds rate plus 50 basis points, (iii) a formula based on the three-month CD Rate plus 100 basis points or (iv) an adjusted LIBOR rate plus 100 basis points. The facility was not used in 2011 and was only used for letter of credit purposes in 2010 and 2009. The facility contains customary affirmative and negative covenants for credit facilities of this type, including the absence of a material adverse effect and limitations on us and our subsidiaries with respect to indebtedness, liens, mergers, consolidations, liquidations and dissolutions, sales of all or substantially all assets, transactions with affiliates and hedging arrangements. The facility also provides for customary events of default, including failure to pay principal, interest or fees when due, failure to comply with covenants, the fact that any representation or warranty made by us is false in any material respect, default under certain other indebtedness, certain insolvency or receivership events affecting us and our subsidiaries, certain ERISA events, material judgments and a change in control. The agreement contains a leverage ratio covenant requiring a ratio of total debt to total capitalization of less than or equal to 65%. At December 31, 2011, our ratio was 33%. We intend to enter into an updated credit agreement prior to the expiration of the facility.

In November 2006, we issued notes having an aggregate principal amount of $200 million. The notes are unsecured, senior obligations that mature on November 15, 2036 and bear interest at 6.55% per annum, payable semi-annually on May 15 and November 15 of each year. The notes have no sinking fund requirement but may be redeemed, in whole or part, at our option. These notes do not contain any material debt covenants or cross default provisions. If there is a change in control, and if as a consequence, the notes are rated below investment grade by both Moody’s Investors Service and Standard & Poor’s, then holders of the notes may require us to repurchase them, in whole or in part, for 101% of the principal amount plus accrued and unpaid interest.

In September 2003, we issued $200 million of 5.50% notes that mature on September 15, 2013. The notes are unsecured, senior obligations with interest payable semi-annually on March 15 and September 15 of each year. The notes have no sinking fund

requirement but may be redeemed, in whole or in part, at our option. These notes do not contain any material debt covenants or cross default provisions.

Available Information

We file annual, quarterly and current reports and amendments to these reports, proxy statements and other information with the United States Securities and Exchange Commission (“SEC”). You may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements and other information regarding issuers, like us, that file electronically with the SEC. The address of the SEC’s website is www.sec.gov.

We also make our filings available free of charge through our Internet website, as soon as reasonably practicable after filing such material electronically with, or furnishing such material to the SEC. Also posted on our website are our Corporate Governance Guidelines, Standards for Director Independence, Crane Co. Code of Ethics and the charters and a brief description of each of the Audit Committee, the Management Organization and Compensation Committee and the Nominating and Governance Committee. These items are available in the “Investors – Corporate Governance” section of our website at www.craneco.com. The content of our website is not part of this report.

Item 1A. Risk Factors.

The following is a description of what we consider the key challenges and risks confronting our business. This discussion should be considered in conjunction with the discussion under the caption “Forward-Looking Information” preceding Part I, the information set forth under Item 1, “Business” and with the discussion of the business included in Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” These risks comprise the material risks of which we are aware. If any of the events or developments described below or elsewhere in this Annual Report on Form 10-K, or in any documents that we subsequently file publicly were to occur, it could have a material adverse effect on our business, financial condition or results of operations.

Risks Relating to Our Business

We are subject to numerous lawsuits for asbestos-related personal injury, and costs associated with these lawsuits may adversely affect our results of operations, cash flow and financial position.

We are subject to numerous lawsuits for asbestos-related personal injury. Estimation of our ultimate exposure for asbestos-related claims is subject to significant uncertainties, as there are multiple variables that can affect the timing, severity and quantity of claims. Our estimate of the future expense of these claims is derived from assumptions with respect to future claims, settlement and defense costs which are based on experience during the last few years and which may not prove reliable as predictors. A significant upward or downward trend in the number of claims filed, depending on the nature of the alleged injury, the jurisdiction where filed and the quality of the product identification, or a significant upward or downward trend in the costs of defending claims, could change the estimated liability, as would substantial adverse verdicts at trial or on appeal. A legislative solution or a structured settlement transaction could also change the estimated liability. These uncertainties may result in us incurring future charges or increases to income to adjust the carrying value of recorded liabilities and assets, particularly if the number of claims and settlements and defense costs escalates or if legislation or another alternative solution is implemented; however, we are currently unable to predict such future events. The resolution of these claims may take many years, and the effect on results of operations, cash flow and financial position in any given period from a revision to these estimates could be material.

As of December 31, 2011, we were one of a number of defendants in cases involving approximately 59,000 pending claims filed in various state and federal courts that allege injury or death as a result of exposure to asbestos. See Note 10, “Commitments and Contingencies” of the Notes to Consolidated Financial Statements for additional information on:

We have recorded a liability for pending and reasonably anticipated asbestos claims through 2021, and while it is probable that this amount will change and that we may incur additional liabilities for asbestos claims after 2021, which additional liabilities may be significant, we cannot reasonably estimate the amount of such additional liabilities at this time. In the fourth quarter of 2011, we updated and extended the estimate of our asbestos liability and recorded an additional pre-tax provision of $242 million ($157 million after-tax), which includes the netting effect of a corresponding insurance receivable of $44 million.

Macroeconomic fluctuations may harm our business, results of operations and stock price.

Beginning in the second half of 2008 and through 2009, the global economy slowed dramatically as a result of a variety of problems, including turmoil in the credit and financial markets, concerns regarding the stability and viability of major financial institutions, the state of the housing markets and volatility in fuel prices and worldwide stock markets. Restrictions on credit availability have and could continue to adversely affect the ability of our customers to obtain financing for significant purchases and could result in decreases in or cancellation of orders for our products and services as well as impact the ability of our customers to make payments. Similarly, credit restrictions may adversely affect our supplier base and increase the potential for one or more of our suppliers to experience financial distress or bankruptcy. While economic conditions improved during 2010 and 2011, the overall rate of recovery experienced during the year was uneven and uncertainty continues to exist over the stability of the recovery. Contributing factors include persistent high unemployment in the U.S. and Europe, a weak U.S. and European housing market, government budget reduction plans and concerns over the deepening European sovereign debt crisis. A return to unfavorable economic conditions, or even an increase in economic uncertainty, could harm our business by adversely affecting our revenues, results of operations, cash flows and financial condition. See “Specific Risks Relating to Our Business Segments”.

Our operations expose us to the risk of environmental liabilities, costs, litigation and violations that could adversely affect our financial condition, results of operations, cash flow and reputation.

Our operations are subject to environmental laws and regulations in the jurisdictions in which they operate, which impose limitations on the discharge of pollutants into the ground, air and water and establish standards for the generation, treatment, use, storage and disposal of solid and hazardous wastes. We must also comply with various health and safety regulations in the United States and abroad in connection with our operations. Failure to comply with any of these laws could result in civil and criminal, monetary and non-monetary penalties and damage to our reputation. In addition, we cannot provide assurance that our costs related to remedial efforts or alleged environmental damage associated with past or current waste disposal practices or other hazardous materials handling practices will not exceed our estimates or adversely affect our financial condition, results of operations and cash flow. For exam-

ple, during the fourth quarter of 2011, we recorded a charge of $30 million, related to our expected liability at the Goodyear, Arizona Superfund site pursuant to an increase in certain remediation activities.

Our businesses are subject to extensive governmental regulation; failure to comply with those regulations could adversely affect our financial condition, results of operations, cash flow and reputation.

We are required to comply with various import and export control laws, which may affect our transactions with certain customers, particularly in our Aerospace & Electronics and Fluid Handling segments, as discussed more fully under “Specific Risks Relating to Our Business Segments”. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services and technologies, and in other circumstances we may be required to obtain an export license before exporting the controlled item. A failure to comply with these requirements might result in suspension of these contracts and suspension or debarment from government contracting or subcontracting. In addition, failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, fines, disruptions to our business, limitations on our ability to export products and services, and damage to our reputation.

The prices of our raw materials can fluctuate dramatically, which may adversely affect our profitability.

The costs of certain raw materials that are critical to our profitability are volatile. This volatility can have a significant impact on our profitability. In our Engineered Materials segment, for example, profits could be adversely affected by further increases in resin and fiberglass material costs and by the inability on the part of the businesses to maintain their position in product cost and functionality against competing materials. The costs in our Fluid Handling and Merchandising Systems segments similarly are affected by fluctuations in the price of metals such as steel and copper. While we have taken actions aimed at securing an adequate supply of raw materials at prices which are favorable to us, if the prices of critical raw materials continue to increase, our operating costs could be negatively affected.

Our ability to obtain parts and raw materials from our suppliers is uncertain, and any disruptions or delays in our supply chain could negatively affect our results of operations.

Our operations require significant amounts of important parts and raw materials. We are engaged in a continuous, company-wide effort to concentrate our purchases of parts and raw materials on fewer suppliers, and to obtain parts from suppliers in low-cost countries where possible. If we are unable to procure these parts or raw materials, our operations may be disrupted, or we could experience a delay or halt in certain of our manufacturing operations. We believe that our supply management and production practices are based on an appropriate balancing of the foreseeable risks and the costs of alternative practices. Nonetheless, supplier capacity constraints, supplier production disruptions, supplier financial condition, price volatility or the unavailability of some raw materials may have an adverse effect on our operating results and financial condition.

Demand for our products is variable and subject to factors beyond our control, which could result in unanticipated events significantly impacting our results of operations.

A substantial portion of our sales is concentrated in industries that are cyclical in nature or subject to market conditions which may cause customer demand for our products to be volatile. These industries often are subject to fluctuations in domestic and international economies as well as to currency fluctuations and inflationary pressures. Reductions in the business levels of these industries would reduce the sales and profitability of the affected business segments. In our Aerospace & Electronics segment, for example, a significant decline in demand for air travel, or a decline in airline profitability generally, could result in reduced orders for aircraft and could also cause airlines to reduce their purchases of repair parts from our businesses. Our Aerospace businesses could also be impacted to the extent that major aircraft manufacturers encountered production problems, or if pricing pressure from aircraft customers caused the manufacturers to press their suppliers to lower prices. In our Engineered Materials segment, sales and profits could be affected by declines in demand for truck trailers, RVs, or building products. In our Fluid Handling segment, a slower recovery of the economy or major markets could reduce sales and profits, particularly if projects for which these businesses are suppliers or bidders are cancelled or delayed. Results at our Merchandising Systems segment could be affected by sustained low employment levels, office occupancy rates and factors affecting vending operator profitability such as higher fuel, confection and borrowing costs. Results in our Controls segment could decline because of an unanticipated decline in demand for the businesses’ products from the oil and gas or heavy truck markets, or from unforeseen product obsolescence.

We could face potential product liability or warranty claims, we may not accurately estimate costs related to such claims, and we may not have sufficient insurance coverage available to cover such claims.

Our products are used in a wide variety of commercial applications and certain residential applications. We face an inherent business risk of exposure to product liability or other claims in the event our products are alleged to be defective or that the use of our products is alleged to have resulted in harm to others or to property. We may in the future incur liability if product liability lawsuits against us are successful. Moreover, any such lawsuits, whether or not successful, could result in adverse publicity to us, which could cause our sales to decline.

In addition, consistent with industry practice, we provide warranties on many of our products and we may experience costs of warranty or breach of contract claims if our products have defects in manufacture or design or they do not meet contractual specifications. We estimate our future warranty costs based on historical trends and product sales, but we may fail to accurately estimate those costs and thereby fail to establish adequate warranty reserves for them.

We maintain insurance coverage to protect us against product liability claims, but that coverage may not be adequate to cover all claims that may arise or we may not be able to maintain adequate insurance coverage in the future at an acceptable cost. Any liability not covered by insurance or that exceeds our established reserves could materially and adversely impact our financial condition and results of operations.

We may be unable to improve productivity, reduce costs and align manufacturing capacity with customer demand.

We are committed to continuous productivity improvement and continue to evaluate opportunities to reduce costs, simplify or improve global processes, and increase the reliability of order fulfillment and satisfaction of customer needs. In order to operate more efficiently and control costs, from time to time we execute restructuring activities, which include workforce reductions and facility consolidations. For example, beginning in the fourth quarter of 2008 and through 2009, in response to disruptions in the credit markets and a substantially weakened global economy, we implemented a broad-based restructuring program and drove general cost reduction activities in order to align our cost base to then lower levels of demand. Through 2010 and 2011, we maintained our reduced cost structure and focus on productivity. However, our failure to respond to potential declines in global demand for our products and services and properly align our cost base would have an adverse effect on our financial condition, results of operations and cash flow.

We may be unable to successfully develop and introduce new products, which would limit our ability to grow and maintain our competitive position and adversely affect our financial condition, results of operations and cash flow.

Our growth depends, in part, on continued sales of existing products, as well as the successful development and introduction of new products, which face the uncertainty of customer acceptance and reaction from competitors. Any delay in the development or launch of a new product could result in our not being the first to market, which could compromise our competitive position. Further, the development and introduction of new products may require us to make investments in specialized personnel and capital equipment, increase marketing efforts and reallocate resources away from other uses. We also may need to modify our systems and strategy in light of new products that we develop. If we are unable to develop and introduce new products in a cost-effective manner or otherwise manage effectively the operations related to new products, our results of operations and financial condition could be adversely impacted.

Pension expense and pension contributions associated with the Company’s retirement benefit plans may fluctuate significantly depending upon changes in actuarial assumptions and future market performance of plan assets.

A significant portion of our current and retired employee population is covered by pension and post-retirement benefit plans, the costs of which are dependent upon various assumptions, including estimates of rates of return on benefit related assets, discount rates for future payment obligations, rates of future cost growth and trends for future costs. In addition, funding requirements for benefit obligations of our pension and post-retirement benefit plans are subject to legislative and other government regulatory actions. Variances from these estimates could have a significant impact on our consolidated financial position, results of operations and cash flow.

For example, the volatility in the financial markets resulted in lower than expected returns on our pension assets in 2008, which resulted in higher pension expense and contributions in subsequent years. We recorded pension expense of $6 million, $14

million and $18 in 2011, 2010 and 2009, respectively, related to our defined-benefit pension plans. In addition, we contributed $47 million, $42 million and $33 million to our defined-benefit pension plans in 2011, 2010 and 2009, respectively, of which $30 million, $25 million and $17 million were made on a discretionary basis to our U.S. defined benefit plan in 2011, 2010 and 2009, respectively, to improve the funded status of this plan. Based on current actuarial calculations, we expect our pension expense and contributions in 2012 to be approximately $20 million and $5 million, respectively.

We may be unable to identify or to complete acquisitions, or to successfully integrate the businesses we acquire.

We have evaluated, and expect to continue to evaluate, a wide array of potential acquisition transactions. Our acquisition program attempts to address the potential risks inherent in assessing the value, strengths, weaknesses, contingent or other liabilities, systems of internal control and potential profitability of acquisition candidates, as well as other challenges such as retaining the employees and integrating the operations of the businesses we acquire. Integrating acquired operations, such as the recent acquisitions of WTA and Money Controls, involves significant risks and uncertainties, including:

There can be no assurance that suitable acquisition opportunities will be available in the future, that we will continue to acquire businesses or that any business acquired will be integrated successfully or prove profitable, which could adversely impact our growth rate. Our ability to achieve our growth goals depends in part upon our ability to identify and successfully acquire and integrate companies and businesses at appropriate prices and realize anticipated cost savings.

We face significant competition which may adversely impact our results of operations and financial position in the future.

While we are a principal competitor in most of our markets, all of our markets are highly competitive. The competitors in many of our business segments can be expected in the future to improve technologies, reduce costs and develop and introduce new products, and the ability of our business segments to achieve similar advances will be important to our competitive positions. Competitive pressures, including those discussed above, could cause one or more of our business segments to lose market share or could result in significant price erosion, either of which could have an adverse effect on our results of operations.

We conduct a substantial portion of our business outside the United States and face risks inherent in non-domestic operations.

Net sales and assets related to our operations outside the United States were 42% and 37% in 2011, respectively, of our consolidated amounts. These operations and transactions are subject to the risks associated with conducting business internationally, including the

risks of currency fluctuations, slower payment of invoices, adverse trade regulations and possible social, economic and political instability in the countries and regions in which we operate. In addition, we expect that non-U.S. sales will continue to account for a significant portion of our revenues for the foreseeable future. Accordingly, declines in foreign currency exchange rates, primarily the euro, the British pound or the Canadian dollar, could adversely affect our reported results, primarily in our Fluid Handling and Merchandising Systems segments, as amounts earned in other countries are translated into U.S. dollars for reporting purposes.

We are dependent on key personnel, and we may not be able to retain our key personnel or hire and retain additional personnel needed for us to sustain and grow our business as planned.

Certain of our business segments and corporate offices are dependent upon highly qualified personnel, and we generally are dependent upon the continued efforts of key management employees. We may have difficulty retaining such personnel or locating and hiring additional qualified personnel. The loss of the services of any of our key personnel, many of whom are not party to employment agreements with us, or our failure to attract and retain other qualified and experienced personnel on acceptable terms could impair our ability to successfully sustain and grow our business, which could impact our results of operations in a materially adverse manner.

If our internal controls are found to be ineffective, our financial results or our stock price may be adversely affected.

We believe that we currently have adequate internal control procedures in place for future periods; however, increased risk of internal control breakdowns generally exists in a business environment that is decentralized. In addition, if our internal control over financial reporting is found to be ineffective, investors may lose confidence in the reliability of our financial statements, which may adversely affect our stock price.

Failure to maintain the security of our information and technology networks, including personally identifiable and other information, non-compliance with our contractual or other legal obligations regarding such information, or a violation of the Company’s privacy and security policies with respect to such information, could adversely affect us.

We are dependent on information technology networks and systems, including the Internet, to process, transmit and store electronic information, and, in the normal course of our business, we collect and retain significant volumes of certain types of personally identifiable and other information pertaining to our customers, stockholders and employees. The legal, regulatory and contractual environment surrounding information security and privacy is constantly evolving and companies that collect and retain such information are under increasing attack by cyber-criminals around the world. A significant actual or potential theft, loss, fraudulent use or misuse of customer, stockholder, employee or our data by cybercrime or otherwise, non-compliance with our contractual or other legal obligations regarding such data or a violation of our privacy and security policies with respect to such data could adversely impact our reputation and could result in costs, fines, litigation or regulatory action against us. Security breaches of this infrastructure can create system disruptions and shutdowns that could result in disruptions to our operations. We cannot be certain that advances in criminal capabilities, new discoveries in the field of cryptography or other developments will not compromise or

breach the technology protecting the networks that access our products and services.

Specific Risks Relating to Our Business Segments

Aerospace & Electronics

Our Aerospace & Electronics segment is particularly affected by economic conditions in the commercial and military aerospace industries which are cyclical in nature and affected by periodic downturns that are beyond our control. Although the operating environment faced by commercial airlines improved in 2011, uncertainty continues to exist. The principal markets for manufacturers of commercial aircraft are large commercial airlines, which could be adversely affected by a number of factors, including current and predicted traffic levels, load factors, aircraft fuel pricing, worldwide airline profits, terrorism, pandemic health issues and general economic conditions. Our commercial business is also affected by the market for business jets which could be adversely impacted by a decline in business travel due to lower corporate profitability. In addition, a portion of this segment’s business is conducted under U.S. government contracts and subcontracts; therefore, a reduction in Congressional appropriations that affect defense spending or the ability of the U.S. government to terminate our contracts could impact the performance of this business. Specifically, as a result of the failure of the Joint Select Committee on Deficit Reduction (Super Committee) to agree on a deficit reduction plan, mandatory reductions in defense are required under the Budget Control Act. The extent and scope of these cuts is difficult to assess at this time. Any decrease in demand for new aircraft or equipment or use of existing aircraft and equipment will likely result in a decrease in demand of our products and services, and correspondingly, our revenues, thereby adversely affecting our business, financial condition and results of operation. Our sales to military customers are also affected by a continued pressure on U.S. and global defense spending and the level of activity in military flight operations. Furthermore, due to the lengthy research and development cycle involved in bringing commercial and military products to market, we cannot predict the economic conditions that will exist when any new product is complete. In addition, if we are unable to develop and introduce new products in a cost-effective manner or otherwise manage effectively the operations related to new products, our results of operations and financial condition could be adversely impacted.

In addition, we are required to comply with various export control laws, which may affect our transactions with certain customers. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services and technologies, and in other circumstances we may be required to obtain an export license before exporting the controlled item. We are also subject to investigation and audit for compliance with the requirements governing government contracts, including requirements related to procurement integrity, export control, employment practices, the accuracy of records and the recording of costs. A failure to comply with these requirements might result in suspension of these contracts and suspension or debarment from government contracting or subcontracting. Failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, fines, disruptions to our business, limitations on our ability to export products and services, and damage to our reputation.

Engineered Materials

In our Engineered Materials segment, sales and profits could fall if there were a decline in demand for trucks trailers, RVs and building products for which our business produce fiberglass panels. While RV demand improved through the first half of 2011, orders and sales slowed notably during the second half of 2011 in response to general economic uncertainty. In addition, profits could also be adversely affected by further increases in resin and fiberglass material costs, by the loss of a principal supplier or by any inability on the part of the business to maintain product cost and functionality advantages when compared to competing materials.

The Company is defending a series of five separate lawsuits, which have now been consolidated, revolving around a fire that occurred in May 2003 at a chicken processing plant located near Atlanta, Georgia that destroyed the plant. The aggregate damages demanded by the plaintiff, consisting largely of an estimate of lost profits which continues to grow with the passage of time, are currently in excess of $260 million. These lawsuits contend that certain fiberglass-reinforced plastic material manufactured by the Company that was installed inside the plant was unsafe in that it acted as an accelerant, causing the fire to spread rapidly, resulting in the total loss of the plant and property. In September 2009, the trial court entertained motions for summary judgment from all parties, and subsequently denied those motions. In November 2009, the Company sought and was granted permission to appeal the trial court’s denial of its motions. The appellate court issued its opinion on November 24, 2010, rejecting the plaintiffs’ claims for per se negligence and statutory violations of the Georgia Life Safety Code, but allowing the plaintiffs to proceed on their ordinary negligence claim, which alleges that the Company failed to adequately warn end users of how the product would perform in a fire. The case is expected to be tried in the Spring of 2012. The Company believes that it has valid defenses to the remaining claims alleged in these lawsuits. The Company has given notice of these lawsuits to its insurance carriers and will seek coverage for any resulting losses. The Company’s carriers have issued standard reservation of rights letters but are engaged with the Company’s trial counsel to monitor the defense of these claims. If the plaintiffs in these lawsuits were to prevail at trial and be awarded the full extent of their claimed damages, and insurance coverage were not fully available, the resulting liability could have a material effect on the Company’s results of operations and cash flows in the periods affected. As of December 31, 2011, no loss amount has been accrued in connection with these suits because a loss is not considered probable, nor can an amount be reasonably estimated.

Merchandising Systems

Results at our Merchandising Systems businesses could be reduced by unfavorable economic conditions, including sustained or increased levels of manufacturing unemployment and office vacancies, inflation for key raw materials and continued increases in fuel costs. In addition, delays in launching or supplying new products or an inability to achieve new product sales objectives, or unfavorable changes in gaming regulations affecting certain of our Payment Solutions customers would adversely affect our profitability. Results at our foreign locations have been and will continue to be affected by fluctuations in the value of the euro, the British pound and the Canadian dollar versus the U.S. dollar. We also may not be able to fully realize the expected benefits of our acquisition of Money Controls.

Fluid Handling

The markets for our Fluid Handling businesses’ products and services are fragmented and highly competitive. We compete against large and well established national and global companies, as well as smaller regional and local companies. While we compete based on technical expertise, timeliness of delivery, quality and reliability, the competitive influence of pricing has broadened as a result of the recent global economic downturn and generally weaker demand levels. Demand for most of our products and services depend on the level of new capital investment and planned maintenance expenditures by our customers. The level of capital expenditures by our customers depends in turn on general economic conditions, availability of credit and expectation of future market behavior. Additionally, volatility in commodity prices could negatively affect the level of these activities and continued postponement of capital spending decisions or the delay or cancellation of projects. Throughout 2011, while we experienced a gradual recovery, unanticipated weakness in demand for, or, delays in large process valve projects would put pressure on operating margins in our Fluid Handling segment. In addition, to the extent we are unable to effectively reduce our cost base in response to such unanticipated declines in demand for our products, our operating results would be adversely affected.

A portion of this segment’s business is subject to government rules and regulations. Failure to comply with these requirements might result in suspension or debarment from government contracting or subcontracting. Failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to export products and services, and damage to our reputation.

In addition, at our foreign operations, reported results in U.S. dollar terms could be eroded by a weakening of currency of the respective businesses, particularly where we operate using the euro, British pound and Canadian dollar.

Controls

A number of factors could affect operating results in our Controls segment. Lower sales and earnings could result if our businesses cannot maintain their cost competitiveness, encounter delays in introducing new products or fail to achieve their new product sales objectives. Results could decline because of an unanticipated decline in demand for the businesses’ products from the industrial machinery, oil and gas or heavy equipment industries. A portion of this segment’s business is subject to government rules and regulations. Failure to comply with these requirements might result in suspension or debarment from government contracting or subcontracting. Failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to export products and services, and damage to our reputation.

Item 1B. Unresolved Staff Comments.

None

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operations should be read together with our consolidated financial statements and related notes included under Item 8 of this Annual Report on Form 10-K.

We are a diversified manufacturer of highly engineered industrial products. Our business consists of five segments: Aerospace & Electronics, Engineered Materials, Merchandising Systems, Fluid Handling and Controls. Our primary markets are aerospace, defense electronics, non-residential construction, recreational vehicle (“RV”), transportation, automated merchandising, chemical, pharmaceutical, oil, gas, power, nuclear, building services and utilities.

Our strategy is to grow the earnings of niche businesses with leading market shares, acquire companies that fit strategically with existing businesses, aggressively pursue operational and strategic linkages among our businesses, build a performance culture focused on continuous improvement and a committed management team whose interests are directly aligned with those of the shareholders and maintain a focused, efficient corporate structure.

Items Affecting Comparability of Reported Results

The comparability of our operating results for the years ended December 31, 2011, 2010 and 2009 is affected by the following significant items:

Asbestos Charge

With the assistance of Hamilton, Rabinovitz & Associates, Inc. (“HR&A”), a nationally recognized expert in the field, effective as of December 31, 2011, we updated and extended our estimate of the asbestos liability, including the costs of settlement or indemnity payments and defense costs relating to currently pending claims and future claims projected to be filed against us through 2021. Our previous estimate was for asbestos claims filed or projected to be filed through 2017. As a result of this updated estimate, we recorded an additional liability of $285 million as of December 31, 2011. Our decision to take this action at such date was based on several factors which contribute to our ability to reasonably estimate this liability for the additional period noted, as follows:

Taking all of these factors into account, we believe that we can reasonably estimate the asbestos liability for pending claims and future claims to be filed through 2021. While it is probable that we will incur additional charges for asbestos liabilities and defense costs in excess of the amounts currently provided, we do not believe that any such amount can be reasonably estimated beyond 2021. Accordingly, no accrual has been recorded for any costs which may be incurred for claims which may be made subsequent to 2021. The liability was $894 million as of December 31, 2011, offset in part by a corresponding insurance receivable of $225 million.

Environmental Charge

For environmental matters, the Company records a liability for estimated remediation costs when it is probable that the Company will be responsible for such costs and they can be reasonably estimated. Generally, third party specialists assist in the estimation of remediation costs. The environmental remediation liability as of December 31, 2011, 2010 and 2009 is substantially related to the former manufacturing site in Goodyear, Arizona (the “Goodyear Site”) discussed below.

The Goodyear Site was operated by UniDynamics/Phoenix, Inc. (“UPI”), which became an indirect subsidiary of the Company in 1985 when the Company acquired UPI’s parent company, UniDynamics Corporation. UPI manufactured explosive and pyrotechnic compounds at the Goodyear Site, including components for critical military programs, from 1962 to 1993, under contracts with the U.S. Department of Defense and other government agencies and certain of their prime contractors. No manufacturing operations have been conducted at the Goodyear Site since 1994. The Goodyear Site was placed on the National Priorities List in 1983, and is now part of the Phoenix-Goodyear Airport North Superfund Goodyear Site. In 1990, the EPA issued administrative orders requiring UPI to design and carry out certain remedial actions, which UPI has done. On July 26, 2006, the Company entered into a consent decree with the EPA with respect to the Goodyear Site providing for, among other things, a work plan for further investigation and remediation activities at the Goodyear Site. The remediation activities have changed over time due in part to the changing groundwater flow rates and contaminant plume direction, and required changes and upgrades to the remediation equipment in operation at the Site. These changes have resulted in the Company revising its liability estimate from time to time. As of December 31, 2009 and 2010, the liability estimate was $53.8 million and $40.5 million, respectively. During the fourth quarter of 2011, additional remediation activities were determined to be required, in consultation with our advisors, to further address the migration of the contaminant plume. As a result, we have recorded a charge of $30 million during the fourth quarter of 2011, extending the accrued costs through 2016. It is not possible at this point to reasonably estimate the amount of any obligation in excess of our current accruals through the 2016 forecast period because of the aforementioned uncertainties, in particular, the continued significant changes in the Goodyear Site conditions and additional expectations of remediation activities experienced in recent years. As of December 31, 2011, the revised liability estimate was $66.0 million.

GE Aviation Systems LLC and The Boeing Company Settlement

During the fourth quarter of 2009, we executed agreements with GE Aviation Systems LLC and The Boeing Company, resolving our claims relating to the brake control monitoring system being developed by our Aerospace Group for the Boeing 787 (the “787 Settlement Claim”). As a result of the agreement, our Aerospace Group recognized an increase in sales and operating profit of $18.9 million and $16.4 million, respectively, in 2009.

Fiberglass-Reinforced Plastics Lawsuit

On April 17, 2009, we reached an agreement to settle a lawsuit brought by a customer alleging failure of the Company’s fiberglass-reinforced plastic material in RV sidewalls manufactured by such customers. In mediation, we agreed to a settlement aggregating $17.75 million. Based upon both insurer commitments and liability estimates previously recorded in 2008, we recorded a pre-tax charge of $7.25 million in connection with this settlement in 2009.

Restructuring and Related Costs

During 2009, we substantially completed our restructuring actions initiated during the fourth quarter of 2008 and recorded pre-tax restructuring and related charges in the business segments totaling $5.2 million. The charges included workforce reduction expenses and facility exit costs of $5.0 million and $0.2 million related to asset write-downs.

During 2010, we recorded pre-tax restructuring and related charges in the business segments totaling $6.7 million. The charges are primarily related to plant consolidations associated with our Crane Energy Flow Solutions business and redundant costs associated with our Money Controls acquisition.

Reinvestment of Non-U.S. Earnings

Associated with our acquisition of Money Controls in December 2010, we considered whether it was necessary to maintain a previously established deferred tax liability representing the additional income tax due upon the ultimate repatriation of a portion of our non-U.S. subsidiaries’ undistributed earnings. We considered our history of utilizing non-U.S. cash to acquire overseas businesses, our current and future needs for cash outside the United States, our ability to satisfy U.S. based cash needs with cash generated by our U.S. operations, and tax reform proposals calling for lower U.S. corporate tax rates. Based on these factors, we concluded that as of December 31, 2010, all of our non-U.S. subsidiaries’ earnings are indefinitely reinvested outside the United States., and as a result, we reversed the aforementioned deferred tax liability and recorded a $5.6 million tax benefit.